Chipper

Weima WL4

Kondisi: bekas, Feed opening 800x600 mm Motor power 18.5 kW Hopper volume 0.6 m³ Rotor diameter 252 mm Operating hours 1,741 h Dimensions (L/W/H) 1,650x1,200x1,595 mm Loading dimensions (L x W x H) 1,650x1,200x1,800 mm Weight 1,300 kg WEIMA Shredder WL 4, machine fully inspected ----- Note: The machine has been thoroughly inspected by us and operates flawlessly, see video. The knives and pusher plate were replaced by the previous owner. The V-belt was replaced by us during inspection. 1,741 operating hours Description: Weima high-performance shredders, with their flexible application possibilities, can process all types of wood materials (hardwood, softwood, chipboard, MDF, plywood, veneer residues, etc.) into fuel chips and achieve a considerable volume reduction of bulky material. Functionality: The machine is equipped with a large feed hopper and can be loaded either by conveyor belt or manually. The hopper can be adapted to individual requirements and guarantees continuous and economical material feeding, without the need for manual assistance. The hydraulically controlled pusher feeds the wood waste to be shredded into the cutting area of the rotor and is automatically and load-dependently controlled. The internal pusher guides are made of highly wear-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are mounted in a cardanic suspension to avoid transverse forces on the piston seals. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and operates at a rotor speed of 80 - 120 rpm. The concavely sharpened, aggressive, and four-way reversible knives/cutting crowns are located in milled knife pockets on special knife holders. This patented system, by enabling a minimized cutting gap between counter knife and rotor, guarantees high throughput rates, low energy consumption, and optimal discharge of the shredded material. The screen mounted under the rotor determines the chip size (10 - 100 mm). If required, a hydraulically opening screen basket is also available. Power transmission from the electric motor is via V-belts to a heavily dimensioned gearbox, which is mounted on one end of the rotor shaft. Technical data WL 4 / 18.5 kW ----- Feed opening: 600 x 800 mm Standard hopper volume: 0.6 m³ Effective rotor width: 600 mm Rotor diameter: 252 mm Power: 18.5 kW Rotor speed: approx. 90 rpm Screen diameter: 15 mm Coating: Weima Standard RAL 2002 / 7016 Connection value: 400 V +/- 5 % / 50 Hz Weight: approx. 1,300 kg Including: Electrical control system (Moeller / Siemens / Allen - Bradley) Control cabinet (Rittal / Sarell) Concavely sharpened reversible cutting crowns (40 x 40 mm) Star-delta starter Vibration-damping base V-rotor (patented) with milled knife pockets in the profile Coloyrtzwshcdw Ejpw (Technical specifications according to the manufacturer - no liability assumed!)

Kondisi: baru, Tahun pembuatan: 2025, daya: 45 kW (61,18 hp), msk-tech-2024-06-12-01 Cslhcdwetpwrmj Eopw

Kondisi: bekas, jam operasional: 1.250 h, berat keseluruhan: 1.500 kg, diameter rotor: 252 mm, panjang total: 1.800 mm, tinggi total: 2.000 mm, lebar total: 1.200 mm, lebar rotor: 600 mm, daya: 18,5 kW (25,15 hp), kecepatan rotasi (maks.): 90 rpm, lebar bukaan pengisian: 600 mm, panjang bukaan pengisian: 800 mm, 3255 Single-Shaft Shredder / Shredder WEIMA WL 4 Used, approx. 1,250 operating hours Quiet-running and slow-speed unit V-rotor system Main drive motor power: 18.5 kW Rotor diameter: 252 mm Rotor width: approx. 600 mm Rotor speed: approx. 90 rpm Hopper volume: 0.6 m³ Feed opening: 800 x 600 mm (L x W) Reversible cutters, concave ground Automatic / manual operation Screen perforation: 15 mm Extraction nozzle: 160 mm Transport dimensions: approx. 1800 x 1200 x 2000 mm (L x W x H) Weight: approx. 1,500 kg Sale on behalf of customer, ex-location near 73430 Aalen, without disassembly, transport, or installation Disassembly, loading, and transport by us possible as an additional service Errors in description and pricing excepted To avoid possible misunderstandings, an on-site inspection after prior appointment is possible and recommended Sale as-is Celhcdjx Hhk Rsw Ejpw Technical data, condition description, year of manufacture, and scope of delivery as per manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty on used machines; goods are sold as inspected Pictures and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: Ex location

Kondisi: bekas, Tahun pembuatan: 2026, Harga spesial – mesin pameran Spesifikasi teknis WL 4: Bukaan hopper dengan Logspacer 600 x 1.050 mm, kapasitas hopper 0,6 m³, lebar kerja rotor 600 mm, diameter rotor 252 mm, daya motor 18,5 kW, kecepatan rotor 80–120 rpm, jumlah pisau 28 buah, tipe & ukuran pisau: cekung / 40 x 40 mm, mahkota pemotong double-side, lubang saringan 15–20 mm. Pengecatan standar WEIMA RAL 2002 / 7016. Daya sambung 400 V +/- 5% / 50 Hz. Berat ±1.300 kg. Termasuk: • panel kontrol* (Rittal) dengan kontrol elektrik (Moeller / Siemens) & starting bintang-segitiga • elemen peredam karet • rotor tipe V (paten) dengan slot pisau dalam profil • saklar limit gearbox • siklus dorong • pendorong setengah mundur • hopper Logspacer • baris pisau kedua. Lokasi stok: pemasok. Cpelhcdwoyl I Npj Esw

Kondisi: baru, Data teknis: - Bukaan hopper: 1850 x 1250 mm - Volume hopper: sekitar 3,0 m3 - Diameter rotor: 500 mm - Panjang rotor: 650 mm - Kecepatan putaran rotor: 80 rpm - Kontrol SPS - Motor – gearbox: 18,5 kW - Panel kontrol (sudah terhubung sepenuhnya) termasuk kabel 5 m - Start bintang-segitiga otomatis - Berat: 3600 kg - Kapasitas tergantung pada jenis material Cpolhcdwewb Sdqo Esw Aplikasi utama dan material yang dapat diproses: Daur ulang dan pengurangan volume logam non-ferro Daur ulang dan pengurangan volume limbah kayu Daur ulang dan pengurangan volume plastik dan busa / styrofoam Daur ulang dan pengurangan volume kabel listrik dan gulungan Daur ulang dan pengurangan volume wadah plastik dan material komposit

Kondisi: sangat baik (bekas), jam operasional: 820 h, restholzzerspaner-weima-wl4 Cslhcdwjylaf Ae Eopw

Kondisi: bekas, Tahun pembuatan: 1993, weima-wl4-1993-de Cslhsyk H Tqecdw Ejpw

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Weima Wood Chipper - floor push feed - low-noise, slow-speed Kondisi sangat baik - hanya 150 jam kerja - Tipe: WL 600 Diameter poros (mm): 260 Panjang pisau (mm): 600 Celhcdwexiq Syj Eepw Kecepatan putar poros pisau (r/mnt): 80 - 125 Jumlah pisau (buah): 14 Ukuran butiran maks. (mm): 20/25 Bukaan (mm): 600 x 800 Diameter nozzle hisap (mm): 160 Daya motor (kW): 15 Tegangan (V): 400 Tinggi kerja (mm): 1645 P x L x T (mm): 1.805 x 1.118 x 1.645 Berat (kg): 1100 Lokasi: stok di 54634 Bitburg - tersedia segera - Penjualan antara waktu dimungkinkan

Kondisi: bekas, Tahun pembuatan: 1991, panjang total: 1.660 mm, tinggi total: 1.470 mm, lebar total: 1.100 mm, 4e9327ad Cpjlhcdwowu Uy Ie Eow

Kondisi: baru, Tahun pembuatan: 2025, de Cpsljvw Tw Ejhcdw Ejw

Kondisi: baru, Tahun pembuatan: 2026, Extremely powerful industrial magnet for iron separation Special price €990 net (Shipping €14.90 net) *You can find the construction lengths in picture 2 The effective surface features a stainless steel end plate (material 1.4301). For installation, there are threaded holes on the rear side. *Handle available upon request The block magnet systems can be used at a maximum operating temperature of up to +100°C. The magnet surface should be cleaned regularly from the collected iron parts. Cpslhcdwstqfhxj Esw Attraction distances for all types, e.g.: For an M5 steel nut approx. 60 mm For an M5 x 30 screw approx. 100 mm Installation example 1: Mounted above a conveyor belt, "iron parts jump onto the magnet's gripping surface". Installation example 2: Mounted in a pipeline system with direct contact to the material flow. For high separation reliability, the installation of several block magnets in a cascade arrangement is possible. Installation and safety instructions: When handling, already during unpacking and later during installation, ensure that no loose iron parts, such as tools or screws, are lying nearby. The magnetic force is so strong that painful injuries can occur if fingers are caught between iron parts and the magnet’s active surface. No steel parts should be located within a minimum distance of 400 mm beneath the active surface.

Kondisi: baru, Tahun pembuatan: 2025, Herstellungsjahr: 2025/2 Motorleistung: 18,5 kW Drehzahl: 90 1/min Gewicht: 1,3 Tonnen Rotorlänge: 600 mm Rotordurchmesser: 252 mm Rotormesser: 28 Stück Cslhsrq Eu Rjcdw Eepw Trichtermaße: 600 x 1050 mm

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Leise- und Langsamlaeufer WL 4/18.5 kW Technical Specifications: Hopper opening: 600 x 800 mm Hopper opening with logspacer: 600 x 1050 mm Hopper volume: approx. 0.6 m³ Rotor working width: 600 mm Cslhobtnftscdw Eepw Rotor diameter: 252 mm Number of blades: 28 Blades: 40 x 40 mm, concave Screen perforation: 15/20 mm Included: Control cabinet Electric control system Star-delta starter Rubber vibration dampers Second blade row Logspacer (self-cleaning hopper) Top configuration Location: Ex-stock Bitburg – immediately available – special price

Kondisi: baik (bekas), de-hu-it-lt-lv-nb-nl-pl Cpelewna Dlohcdw Ejw

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Whisper- and Slow-speed Shredder WL 4/18.5 kW Technical Specifications: - Hopper Opening: 600 x 800 mm - Hopper Opening with Logspacer: 600 x 1050 mm - Hopper Volume: approx. 0.6 m³ - Working Width of Rotor: 600 mm - Rotor Diameter: 252 mm - Number of Blades: 28 pcs - Blades: 40 x 40 mm concave - Screen Perforation: 15/20 mm Cslhcsbunq Hodw Espw Included: - Control cabinet - Electrical control system - Star-delta starter - Rubber anti-vibration mounts - Second row of blades - Logspacer (open-cutting hopper) Location: 54634 Bitburg Available immediately