Pers eksentrik kolom tunggal

Weingarten ARP 100

Kondisi: bekas, Single-Column Eccentric Press WEINGARTEN Type ARP 100 Machine No. 122481 Year of Manufacture: 1984 Pressing Force: 100 tons Throat Depth: 400 mm Table Size: 920 x 660 mm Ram Surface: 700 x 450 mm Frame Width at Rear: 735 mm Stroke Adjustment: 20 - 160 mm Ram Adjustment: 80 mm Die Height at 160 mm Stroke: max. 355 mm (without bolster plate) Die Height at 20 mm Stroke: max. 425 mm (without bolster plate) Stroke Rate: 60 strokes/min Table Surface (with bolster plate): 920 x 610 mm Bolster Plate Thickness: 90 mm Pass-through Hole in Bolster Plate: Ø 210 / 180 mm Pass-through Hole in Machine Table: Ø 210 / 180 mm Table Height above Floor: 800 mm (without bolster plate) T-slot Width (table and ram): 22 mm Clamping Shank Bore: 50 mm Motor Power: 11 kW Electrical Connection: 400 Volt, 50 Hz - Hydraulic overload protection in the ram - ORTLINGHAUS pneumatic clutch-brake combination - Electrically adjustable ram with counter - Clamping shank bore with clamping piece Nkodeu Rwa Ispfx Ahwju - Front crankshaft support bearing - Gear train in enclosed oil-bath gearbox - Two pneumatic ram counterbalance cylinders - Automatic central lubrication system by WOERNER - Stroke release via electric foot switch or two-hand control panel - Electrical control cabinet mounted on the machine - Operating manual and wiring diagram - UVV (accident prevention regulations) for hand feeding operations Space requirements (L x W x H): 2200 x 1600 x 3250 mm Weight: 8.3 tons Good condition

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, ketebalan pelat baja (maks.): 25 mm, daya: 6 kW (8,16 hp), Daerah kerja 3000x1500. Sistem Loadmaster sudah termasuk. Karena mesin tidak digunakan dalam waktu lama, diperlukan servis. Nksdpfxjwh R R Nj Ahwsu

Kondisi: bekas, Tahun pembuatan: 1983, de-machinery-specs-1 Nsdpfjxh Swhox Ahweku

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 25.12.15, Fresan FP 100P - C-frame Eccentric Press - 100 Tonnes (1000kN) TECHNICAL DATA: * Capacity: 100 tonnes (1000kN) * Strokes per minute: 60 (adjustable) * Distance between table and slide: 445 mm * Stroke adjustment: 0 - 132 mm * Slide adjustment: 95 mm (motorized) * Table dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Equipment in compliance with CE regulations * Welded steel frame construction * Crankshaft made of alloyed steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC-ground for minimal surface friction. * High-quality bronze bearings (SnBz-12) * Pneumatic clutch-brake combination * Fully enclosed, helical-geared gearbox in oil bath * Press safety valve Nkodpfonxh T Rsx Ahwsu * Safety PLC & safety switches & light barriers (Pilz) * 6-point slide guidance with used-oil collector * 7-inch HMI touchscreen control panel * Adjustable stroke rate with AC inverter * Motorized slide adjustment * Mechanical overload protection (hydraulic overload protection can be retrofitted to the standard machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 units) * Automatic central lubrication & used-oil collector (circulating oil / slideway oil) OPTIONAL EQUIPMENT: * Extra clamping plate * Parts ejector (upper and/or lower, mechanical or pneumatic) * Material feeder, loading and unloading systems (decoiler, straightening machine, pneumatic or servo feed unit) * Customized machine

Kondisi: baru, gaya penekanan: 100 t, panjang langkah: 400 mm, - Cylinder stroke 400 mm - Working width 1010 mm - Cylinder is movable - Electrically or manually operated - Pressure gauge - Emergency stop - 400V Nsdogp Dc Rspfx Ahweku

Kondisi: baru, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650 x 450 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Sturdy yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to oblique cut, feed controller, and cutting pressure controller • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-saving and low vibration due to oblique cutting • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Large-dimensioned flywheels (520 mm) each • Clear miter adjustment up to 60° Semi-automatic function: 1. Clamp material Nkodpfsd Iipmex Ahwsu 2. Start saw 3. Rapid feed down to material start or for serial cutting, direct sawing 4. Saw blade off 5. Raise frame just above the material 6. Vise opens

Kondisi: bekas, daewoo-vc500-de Njdpfxstzgaqs Ahwjku

Tahun pembuatan: 2003, Kondisi: bekas, Press force 100 t Stroke 10-130 mm Strokes per minute 30-90 spm Throat depth 330 mm Ram adjustment 100 mm Njdpfx Ahera Rr Esweku Table area 950x660 mm Ram area 540x440 mm Passage opening in table Ø 230 mm Table height 1000 mm Ram bore Ø 50 mm Total power requirement 7.5 kW Machine weight approx. 7 t Pneumatic clutch-brake combination Beutler Datatech press control Centralized oil lubrication Hydraulic overload protection in ram Manual stroke adjustment Manual ram adjustment Two-hand operation Foot operation GSW straightening and feed machine VRMA 40/78, year of construction 2003 Feed controller HDS 50 BSA decoiler NO20/400V-AP

Kondisi: baik (bekas), Maschine Typ Hakenstrahlanlage 250 kg TOSCA TS-250 Nkjdpfsvpgq Nox Ahwou Typ: Hakenstrahlanlage Max. Werkstückdurchmesser: 1000 mm Max. Werkstückhöhe: 1500 mm Max. Werkstückgewicht: 500 kg Maschinenöffnungsbreite: mm Anzahl Turbinen: 2 Turbinen-Typ: 360 Turbinenraddurchmesser: 360 mm Turbinenleistung: 7,5 kW Max. Turbinenförderleistung: 105 kg/min Fördergleistyp: Y Reinigertyp: Luftabscheider Fundament: nicht erforderlich Gehäuseschutz: Mangan + Gummi Erforderlicher Luftdurchsatz: 3.000 m³/h Max. installierte Anschlussleistung: ca. 19 kW Gesamtgewicht der Maschine: 0 kg Gesamtbreite der Maschine: mm Gesamthöhe der Maschine: mm Gesamtlänge der Maschine: mm Die Maschine befindet sich in einer vollständigen Generalüberholung. Sämtliche beschädigten Komponenten werden durch Neuteile ersetzt, Turbinen werden komplett überholt, neue Lackierung RAL 7037/2000. Die Maschine wird in einem Zustand ausgeliefert, der einem Neugerät entspricht. !!! ZUSTAND WIE NEU !!!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, lebar kerja: 215 mm, daya pengelasan (maks.): 750 kVA, Komplette Gitter- und Matten-Schweißanlage Die Anlage besteht aus: - Matten-Schweißlinie SCHLATTER PG 24, halbautomatisch, Baujahr 2002 - Gitterträgeranlage SMEI, vollautomatisch, Baujahr 2003 - Richt- und Schneidemaschinen 1x Wafios R4 2x VITARI NR16 1x VITARI NR10 - Kaltziehlinie SMEI, Eingangsdraht max. 10 mm, Geschwindigkeit – 4 m/s Njdjqy Ek Aopfx Ahwsku - Stumpfschweißmaschine SMEI - Drahtanspitzgerät SMEI