Pers eksentrik - kolom tunggal

WEINGARTEN E 10

Kondisi: baik (bekas), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Horizontal throat depth (steady arm): 670 mm Vertical throat depth (steady arm): 940 mm Lsdpskvnumofx Agljrg Cylinder stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Therefore, these details do not represent warranty or binding contractual terms. We recommend verifying all critical details.

Tahun pembuatan: 1972, Kondisi: bekas, nomor mesin/kendaraan: 51512/72, Pressing force: 75 t Throat depth: 300 mm Table size: 620 x 800 mm Pass-through hole in table: 225 x 325 mm Lrsdpfxsb Tdquo Aglog Table adjustment: 175 mm Ram area: 180 x 475 mm Ram adjustment: 80 mm Stroke adjustment: 16 - 140 mm Strokes per minute: 90 /min Drive motor: 380 V, 3 kW Space requirement: 1700 x 1200 x 2500 mm Weight: 3.3 t

Tahun pembuatan: 2002, Kondisi: bekas, Press force 63 t Throat depth 315 mm Stroke 8–100 mm Strokes per minute 140 spm Ram adjustment 63 mm Table size 1200 x 630 mm Ram surface 800 x 315 mm Passage opening in table Ø 110 mm Table height 820 mm Ram bore Ø 50 mm Shut height 335 mm Total power requirement 7.5 kW Machine weight approx. 5 t Pneumatic clutch/brake combination Central oil lubrication Hydraulic overload protection Manual stroke adjustment Manual ram adjustment Two-hand control Foot control Roller block rails in table Hydraulic clamp on ram Compensating cylinder Ledpfx Agjlp U D Tjlorg Approved for manual loading operations

Kondisi: bekas, Tahun pembuatan: 1970, nomor mesin/kendaraan: 120895, EN-TRANSLATION-001 Lredpofx Hv Hjfx Aglsg

Tahun pembuatan: 1992, Kondisi: baik (bekas), nomor mesin/kendaraan: 29-0288, Offer 04612 Technical Specifications: - Cutting range at 90°: round 260 mm - flat 450 x 240 mm Lrsdpfxogin Ndo Aglog - Cutting range at 45°: round 230 mm - flat 240 x 200 mm - Machine is mounted on original rotary base - Saw band dimensions: 3660 x 25 x 0.9 mm - Cutting speeds: 20 / 35 / 50 / 70 m/min - Hydraulic lifting and lowering of the saw frame - Cutting pressure steplessly adjustable: 0 - 10 m/min - Total drive power: 400 V / 0.8 kW - Coolant device - Required space (approx.): W 2100 x H 1200 x D 1000 mm - Weight (approx.): 500 kg

Kondisi: baru, Pressure: 25 t Reach: 200 mm Stroke: 4 - 80 mm Table surface: 520 x 400 mm Strokes per minute: 160 spm Ram surface: 160 x 160 mm Ram adjustment: 40 mm Ram bore: 32 H7 mm Pass-through opening in the table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Total power requirement: 2.7 kW Machine weight: approx. 1.9 t Space requirement: approx. 1.3 x 1.0 x 1.85 m - Pneumatic clutch-brake combination Ortlinghaus - Central lubrication system Vogel - Cam controller Balluff - Height-adjustable table - Control cabinet with touchscreen Lodpfx Agjb U Hwpjlerg - Foot switch

Kondisi: baru, Pressure: 40 t Reach: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Stroke rate: 130 strokes/min Ram area: 185 x 180 mm Ram bore: 40 H7 mm Pass-through opening in table: 210 x 170 mm T-slots: 22 mm Clamping plate: 570 x 450 x 65 mm Total power requirement: 3.5 kW Machine weight approx.: 2.7 t Space required approx.: 1.4 x 1.1 x 2.1 m Lrsdpfjb U Hwtex Aglog - Hydraulic clutch-brake combination - Central lubrication system by Vogel - Cam controller by Balluff - Control cabinet with touchscreen - Height-adjustable table - Foot switch

Tahun pembuatan: 1998, Kondisi: sangat baik (bekas), Schenker FA-10T, maszyna do nawijania sprężyn skrętnych, w dobrym stanie Lsdpfsiu H T Rex Aglorg

Kondisi: bekas, nomor mesin/kendaraan: 2520, Round steel: 42 mm Square steel: 38 mm Angle steel: 90° 110 x 10 mm Flat steel: 150 x 16 mm Blade length: 250 mm Notching depth up to: 12 mm Notching device (L and T steel): 80 x 10 mm Lodpfx Aocxxrpjglerg Punching unit: Pressing force: 50 t Stroke: 27 mm Punching unit: Capacity (diameter x thickness): 25 x 16 mm / 20 x 19 mm Machine weight approx.: 1.6 t Required space approx.: 1.6 x 0.85 x 1.8 m

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Large, semi-automated Polar 137 XT-Autotrim Pace cutting line with stack lift, jogging system with counting scale, gripper transport system, turning gripper, and unloader Year: 2010 Approx. 5.43 million cuts Workflow: The material to be cut is raised to an optimal working height using a loading lift, placed in the jogger by the operator, jogged, and then transferred by the Autotrans gripper system from behind the jogger onto the rear table of the high-speed cutter and rotated as needed. After cutting, the Transomat automatically stacks the layers onto a pallet, allowing cutting to continue simultaneously. Polar Stack Lift LW 1200-4 Platform size: 80 x 126 mm Load capacity: 1,200 kg Equipped with continuously adjustable photoelectric sensors for automatic lifting or lowering. Jogging System RAH-4 with air-removal roller and rear-table discharge Working size up to 75 x 105 cm The jogged material is automatically discharged to the rear into the STR stacking rack. The Autotrans gripper transport system then takes over layer transport to the rear table of the high-speed cutter. Sheet scale – Polar counting scale Avery Weigh-Tronix For creating precisely counted cutting batches Gripper transport system POLAR Autoturn – clamp transport to rear-table loading and rotary gripper takes over the prepared cutting batch from the stacking rack or buffer table. Via air tables, which optimize the conveying process via an air cushion, the material is transported directly onto the rear table of the high-speed cutter and placed precisely in position. During transport, the cutting batch is held firmly by the grips, ensuring the batches remain perfectly square and aligned, even when pre-aligned, during transfer. Polar 137 XT-AT cutting machine with touch operation Lodpfexd U Saox Aglerg and Autotrim function for automatic trim waste removal beneath the front table. - Lowerable side gauge left (required for rear table loading), also allows formats with a diagonal of