1

WEINIG / DIMTER Weinig Unicontrol 10-5

Kondisi: bekas, Tahun pembuatan: 2001, Spindle tiltable: Yes, -25 to +45° Height adjustment: electric Tilting adjustment: electric Bjdpfxowx Nnbe Aa Towi Spindle fence jaw adjustment: manual Spindle fence jaws: Aigner Integral 600mm Height display: digital Tilting angle display: digital Spindle fence position indicator: Siko counter Spindle diameter: 30 mm Pre-selectable spindle speeds: 1,500 / 3,000 / 4,000 / 4,500 / 5,000 / 6,000 / 8,000 / 9,000 / 10,000 rpm Motor power: 7.5 kW Motor brake: Yes, automatic Power feed unit: Wegoma, 4 rollers Extraction connection: 2 x 120mm Machine length: 1,900 mm Machine depth: 1,400 mm Weight: 1,000 kg

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, SCHEER FM 16 Panel Saw System – DNC 3100 x 3100 As-new condition – Machine No. 33542 Bwodounwk Tspfx Aa Tsi The SCHEER FM 16 is a high-performance, electronically controlled panel saw featuring state-of-the-art drive technology and an intuitive control system. The machine has been completely overhauled and newly painted – its condition is virtually as-new. Ideally suited for precise, automated cutting of wood-based panels in continuous industrial operation. Key technical data: Cutting length: 3,100 mm Saw depth / blade projection: 80 mm Main saw motor: 7.0 kW Scoring saw motor: 1.1 kW (can be switched on/off) Feed speed: 2 – 40 m/min (infinitely variable) Return: Rapid traverse, automatic lowering Operator interface: SCHEERWIN, graphical, document-oriented (64-bit), running on Windows 10 Drive system: Küenle inverter with Stöber synchronous servo drives incl. absolute encoders – for highest positioning accuracy and dynamic control Features & equipment: Longitudinal panel saw FM 16-3100 with hardened guides and automatic forward/reverse Material feed table HP 5021 with 6 clamp grippers, servo drive & measuring accuracy of 0.05 mm Automatic angle pressure device WP, adjustment range 2,400 mm Off-cut device SP 5000 for minimum off-cuts as small as 5 mm Angle stop table HP 5024 (1,800 x 800 mm), steel angle with Pertinax surface Workpiece support table HP 5025 (1,800 x 800 mm), also with Pertinax surface Air cushion system in the front tables incl. radial fan Saw blades included: KSB 4005 for main saw (305 mm dia., Z = 60) KSB 4006 for scoring saw (200 mm dia.) Condition & Service: Condition: Factory reconditioned & as-new Functionality: Fully operational Warranty: 12 months Reliability in intensive use: This machine operates reliably worldwide—even under extreme conditions. Whether in Africa’s dry climate or in high humidity environments in Southeast Asia (e.g., Thailand), the SCHEER FM 16 runs flawlessly in 3-shift systems—365 days a year—and impresses with its exceptional precision, stability, and durability. Warranty: We are so confident in the quality and robustness of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excluding electrical supplied parts and consumables.) Flexibility & customization: We offer various models and configurations for every budget. Custom solutions tailored to your individual requirements are also available. 📞 Contact us for a personalized offer or to schedule a viewing. Machine available ex stock. Delivery, commissioning, and training available as options.

Kondisi: baru, Tahun pembuatan: 2024, TECHNICAL DATA Bwedsfpb Nmopfx Aa Tji Table size: 1100 x 760 mm Table height: 870 mm Spindle shaft (milling spindle) Non-interchangeable 30 mm Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Color: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Spindle moulder with fixed, one-sided tilting spindle for tilt range from -5° to +45.5° Positioning control for height and tilt adjustment with height zeroing and offset travel Electronic position and speed indicators 4 spindle speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning device Push buttons for spindle start and stop Forward and reverse rotation Quick-clamping system for cutter arbor Finely planed cast iron table with rigid frame support Control panel mounted below on rigid frame support Cutter fence 216 with total adjustment via handwheel and LCD display, including cast iron fence plates and aluminum chip deflector lips Machine socket outlet Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa Spindle shaft 30 mm, non-interchangeable CE compliant GS tested

Kondisi: baik (bekas), Tahun pembuatan: 1981, Spindle moulder, Table milling machine, Wood milling machine - Manufacturer: Martin, Table milling machine model T 21 with table extension - Milling spindle: 30 mm diameter mounting - Speeds: 3 rpm - Overall dimensions: 1620/1060/H1120 mm Bedpfx Aaewnbfke Tewi - Total weight: 698 kg

Kondisi: sangat baik (bekas), Horizontal panel dividing saw with rear lift table Control: MCS Evolution Software included Bwedpfx Asq Rfahoa Toi Powered roller conveyors (approx. 4500 x 2200 mm) Lift table (4300 x 2200 mm) Panel rotation device (for 90° rotation) No. 2 rear pushers (1 with clamping grippers) Program pusher division No. 10 clamping grippers Max. cutting width (mm): 4300 Useful stroke of pusher (mm): 4300 Max. saw blade projection (mm): 135 Max. gripper opening width (mm): 133 Scoring saw (max. blade diameter) mm: 20 Main saw (max. blade diameter / power) mm: 460 - kW: 27 Adjustable saw carriage feed rate (m/min): 0 - 150 No. 4 front air cushion tables Total connected load (kW): approx. 36

Kondisi: bekas, Technical data: Max. planing width: 230 mm Max. planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle configuration: bottom 5.5 kW right + left 11 kW top 7.5 kW universal 5.5 kW Each spindle driven by a separate motor Number of steel feed top rollers: 5 Number of rubber feed top rollers: 3 1 rubber roller on the table Extraction port diameter: 150 mm Infinitely variable feed speed: 4-24 m/min Cardan shaft feed drive Table lubrication pump Bwsdemiik Tepfx Aa Tei Operating pressure: 6 bar Electric height adjustment of the machine body Power supply: 400 V Overall dimensions: Length: 4,240 mm Width: 1,550 mm Height: 1,560 mm

Kondisi: bekas, nomor mesin/kendaraan: 007875, Lebar maksimum panel: 3800 mm Panjang maksimum panel: 2200 mm Proyeksi maksimum mata pisau utama: 130 mm Bwjdpfowkf Axjx Aa Tji Jumlah penjepit: 7

Kondisi: bekas, Tahun pembuatan: 2007, Maschine zum Bohren von Dübellöchern URBAN DB 3100, Baujahr 2007 Zustand: sehr gut - Profilspannsystem und Bohrvorschub werden über Fußschalter bedient Bwsdowinq Nepfx Aa Tsi - Elektrischer Bohrmotor schaltet nach Abschluss des Bohrvorgangs automatisch ab - Bohrvorschubgeschwindigkeit und Bohrtiefe sind individuell einstellbar - Schnellspannbohrfutter für Standardbohrer bis max. Ø13 mm - Stütz- bzw. Auflagetische rechts und links

Tahun pembuatan: 2010, Kondisi: sangat baik (bekas), I am selling window sets suitable for CNC window manufacturing centers: LEUT wood-aluminum 110mm Bore 50mm. Everything complete. Very good condition. Available as a set. Possible to purchase separately as well. Bwsdpfx Aaog Tumye Toi

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, daya: 7 kW (9,52 hp), diameter mata gergaji: 305 mm, panjang total: 3.100 mm, lebar total: 3.100 mm, berat keseluruhan: 3.000 kg, panjang pemotongan (maks.): 3.100 mm, tinggi potong dengan pisau scoring (maks.): 70 mm, kecepatan pemakanan sumbu X: 40 m/menit, laju pemakanan sumbu Z: 50 m/menit, persyaratan ruang panjang: 3.100 mm, lebar yang dibutuhkan: 3.100 mm, Perlengkapan: doser, kecepatan rotasi dapat diubah tanpa batas, SCHEER PA 4136 Panel Dividing System – 3100 x 3100 The PA 4136 is a high-performance, electronically controlled panel saw designed for precise, efficient, and automated cutting of wood-based materials. It is ideally suited for industrial use in joineries, furniture production, and panel processing plants. Condition & Service: Condition: Very good Functionality: Fully operational Warranty: 12 months CE-compliant and dust tested (limit value < 2 mg/m³) Key Technical Data & Features: - Longitudinal saw FM 20-3100 with hardened guides - Automatic forward & return movement of the saw unit (return lowers automatically) - Feed drive via three-phase gear motor, frequency inverter-controlled - Feed speed: 2 – 40 m/min (stepless) - Return speed (rapid traverse): 50 m/min - Extraction ducts in machine base & pressure beam - Scoring saw blade adjustable from outside (without opening hood) - Safety hood interlock with lamellar curtain SZ 5008 - 3-stage cutting height adjustment LA 4143 - 6 cut-outs in the pressure beam for remnant cuts up to 5 mm - Saw motor: 7.0 kW | Scoring motor: 1.1 kW (can be switched off) - Cutting length: 3100 mm | Cutting height: 70 mm Material Handling & Feed: - Angle pressure device WP 5003 with pressure claw for cross cuts - Adjustment range: 2400 mm Bwjdowrn Efspfx Aa Tei - Fully automatic control via DNC-AT - Material feed table HP 5091 - 2 overhead guides, rack and pinion guide - Servo drive for material pusher - Feed speed: 25 m/min (safety-limited) - Return speed: 40 m/min - 6 clamping fingers, 4 double roller tracks - Table length: 3100 mm | Fence depth: 3150 mm - Closed pertinax surface in the angle stop area Control & Operation: - Operating system: Ubuntu Linux - Integrated PC with hard disk, parallel & serial interface - Network capable (LAN/WLAN), remote maintenance via Internet (TeamViewer, Remote Desktop) - USB print function - Multilingual dialog programming - 15" flat screen, multifunction keyboard on pivoting control panel - Graphical display of cutting patterns and workflows Software / Programs: - OPTIMAX: Office optimization, offcut calculation, material requirement - OPTIMIN: Direct optimization on the machine PC with parts list input - Processing via USB, diskette, or online (optional) - Manual, automatic & special operating modes (e.g., grooving, veneered parts) Additional Equipment: - Angle stop table HP 5085: 1,720 x 800 mm | pertinax surface - Workpiece support table HP 5025: 1,720 x 800 mm | pertinax surface - Air cushion system LK 5030 integrated in both tables - Circular saw blade KSB 4005: Ø 305 mm, Z = 60 - Circular saw blade KSB 4006: Ø 200 mm, Z = 60, conical Reliability for Continuous Operation: This machine is in use worldwide – even under extreme conditions. Whether in the dry climate of Africa or high humidity in Southeast Asia (e.g., Thailand): The PA 4136 runs reliably in 3-shift operations – 365 days a year – and stands out for its exceptional stability and endurance. Guarantee: We are so convinced of the quality and stability of our machines that we offer a 7-year warranty on the machine construction and guide rails. (Excludes electrical supply parts and wearing parts.) 📞 Contact us for an individual offer or to arrange a viewing appointment. Machine available from stock. Delivery, commissioning, and training available as options.