Pengoptimalisasi Weinig Dimter OptiCut S 90

Weinig Dimter OptiCut S 90

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Optimizing crosscut saw from 2018. This WEINIG DIMTER Opticut S90 features a 500 mm saw blade diameter and a maximum cutting height of 120 mm. It is suitable for input lengths from 400 to 6,300 mm and widths from 20 to 300 mm. If you are looking for a high-quality cutting machine, the WEINIG DIMTER Opticut S90, which we offer for sale, should be considered. Contact us for further details. • Saw blade • Diameter: 500 mm • Bore: 30 mm • Adjustable saw blade speed: 40-100% via frequency inverter • Workpiece capacity • Input length (min/max): 400-6,300 mm • Width (min/max): 20-300 mm • Thickness (min/max): 10-120 mm • Maximum cutting height: 120 mm Hjdeylmmmepfx Ahwoi • Minimum cross-section: 20 x 10 mm • Maximum cross-section 1: 215 x 120 mm • Maximum cross-section 2: 300 x 40 mm • Permissible wood curvature: max. 2 mm/m or 8 mm over the full length • Table incline: 10° • Movement and accuracy • Positioning speed (return stroke): max approx. 180 m/min • Positioning speed (forward stroke): max approx. 60 m/min • Positioning accuracy: +/- 0.1 mm • Motors and power • Pusher motor output: 5.1 kW • Saw motor output: 7.5 kW • Total electrical power: approx. 15 kW • Control and interface • Control unit: OptiCom Pro with 18.5" touchscreen • Screen resolution: 1366 x 768 pixels • Protection rating (front): IP65 • Interface: USB port and Ethernet network connection • Data format: CSV (ASCII) for import/export • Operating parameters and environment • Voltage: 400 V / 50 Hz • Operating pressure: 6-8 bar (min.) • Air consumption: approx. 250 NL/min • Extraction port: diameter 125 mm • Required extraction capacity: velocity approx. 30 m/s; volume approx. 1,300 m³/h • Noise level (idling): ≤ 85 dBA

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, Üstünkarli UDKP 160 Cutting height: 160 mm Hedpfx Aoucnudshwji Chain bed approx. 420 mm With spikes in the chain bed Includes slat bush and spacer rings Main motor: 75 kW

Tahun pembuatan: 2003, Kondisi: bekas, Bollegraf Hammermühle AS 75/850 Bouwjaar: 2003 Vermogen: Geschiktheid: Invoersectie: Rotor- Rotorbreedte: 850 mm Prijs: 24.500 euro Hedog T Id Njpfx Ahwei Contactpersoon: de heer Rainer Eckerle

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 500 h, Fungsionalitas: berfungsi sepenuhnya, Drying paternoster for finger-jointed boards Hodpfxjwclkyo Ahwoi Consisting of: - Transfer chain after the finger jointing press, foldable - Drying paternoster, approx. 7 m, for board lengths up to 6 m - Separation and zero saw - Conveyor belt for residual wood disposal - Stacking unit - Strip magazine not included in the sale - Package cross conveyor The machine is in very good condition, very little used The machine is still installed but available immediately

Kondisi: baru, Tahun pembuatan: 2024, ♻ Universal application (wood, pallets including nails and staples, wood fibre boards and remnants, veneers, MDF boards, plastic, etc.) ✔ Motor power: 18.5 kW ✔ Rotor length: 870 mm ✔ Rotor diameter: 270 mm ✔ Rotor speed: 80–120 rpm ✔ Number of cutting knives: 2x19 ✔ Granulation: 10–50 mm ✔ Capacity: up to 7 m³/h* ✔ Extraction port: 200 mm ✔ Feed opening: 1,446 x 1,565 mm Hsdshzlr Ispfx Ahwoi ✔ Dimensions (L/W/H): 2.15 / 1.97 / 2.04 m ✔ Weight: 2,050 kg 2-year warranty or 2,000 operating hours

Kondisi: bekas, Tahun pembuatan: 2021, diameter mata gergaji: 800 mm, kecepatan rotasi (min.): 1.450 rpm, daya: 5,5 kW (7,48 hp), Cross-cut saw AS Very good, well-maintained condition Saw blade diameter: 800 mm Robust steel tube base frame High-performance saw motors Hjdpfx Asd Szf Njhwei Pneumatic material clamps (3 units, vertical) Two-hand safety operation Coolant system Protective cover Optionally available with length measuring system or automatic positioning system Also available as saw-drilling or saw-punching automatic machine upon request.

Kondisi: bekas, Tahun pembuatan: 2001, Timber dimensions to be processed: Input lengths min/max: 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max: 40 - 300 mm Input thicknesses min/max: 15 - 120 mm Maximum timber cross-section: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw, min./max.: 510 – 2800 mm Special application: Cutting blocks, length min/max: 100 – 200 mm (Note: Multiple block lengths in new sorting; blocks are transported to the end of the sorting line and fall into customer-supplied mesh boxes) Cut-off/trimming tolerance: +/- 0.8 – 1.5 mm (for timber with minimal resin content and even surface. Tolerance up to 1m fixed length max.; tolerance for longer parts up to 2.5m). Thickness tolerance: +/- 3 mm Curvature of timbers in any direction: max. 10 mm per meter length Timber species: Softwood or hardwood System performance: Feed speed: steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 sec To attain the practical daily capacity, effectiveness factors dependent on the customer’s production conditions must be considered. Infeed height and saw: 900 mm (To be mounted on customer-side platform, saw requires concrete base) Sorting height: 2000 mm Connection data: Total electrical connected load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Maximum voltage fluctuation: 5 % Compressed air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint color: pebble grey RAL 7032 and blue NCS 5030-R 80 B Hodpfxsw Sy T He Ahwji POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Non-driven support roller, front end in front of sheet metal table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera for detection of defect markings Pos. 4: Automatic contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version, with built-in waste chute, includes equipment package for large timber cross-sections Graphic input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control Processing capability: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on the outfeed conveyor Location: Nattheim

Kondisi: baik (bekas), The debarker is perfectly suited for processing both hardwood and softwood logs. - Trolley made of heavy-duty steel construction Hodpfxetuyr Is Ahwji - 5 pairs of drive wheels - Milling arm constructed from heavy-duty steel - Hydraulic milling head - 22 kW motor Please note: The log feeder visible in the photo is not included in the offer and is available at an additional cost of 25,000 PLN / 5,500 EUR.

Tahun pembuatan: 1997, Kondisi: baik (bekas), • Working width (mm): 1300 • CSD system • Cross-belt sanding unit • Longitudinal sanding unit – shoe • Brushing unit Hjdpfxjidi Ive Ahwsi • Ionization

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 600 mm, tinggi kerja: 900 mm, penggerak gergaji: 7.500 W, Swiveling (45°) saw Equipped with a 6-meter pusher Chain unloading deck with 6-strand loading chains for faster loading Hsdpowzg E Nsfx Ahwoi Machine overhauled and fitted with a new digital touchscreen