Mesin serut dengan sistem penumpukan

Weinig Hydromat 22 B / 8 Wellen

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Complete Weinig planing line consisting of: Package infeed, automatic tilt destacking, and stick separation. Cross conveyor with waste diversion. Conveyance to twin bandsaw. Singulation prior to planing machine infeed. Through-feed crosscut saw. Infeed to the planing machine. Dksdewvqvbspfx Adgeg Weinig 22 B planing machine with 8 spindles. Frequency-controlled electronic feed up to 80 m/min. In 2023, the planing machine was equipped with new frequency-controlled feed, new table, and new wear plates. Planing machine outfeed. Weinig stacking system with stick magazine. Also includes Almab stacking system. The planing line is fully mechanized. Specifications: Wood length from 2 to 6.10 m. Wood thickness from 10 to 120 mm. Wood width from 40 to 220 mm. Package size input: 1.20 x 1.30 m. Output: 1.20 x 1.20 m (W x H). Well-maintained line. Regularly serviced.

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Kondisi sangat baik: ruang pengering kompak MÜHLBÖCK Tipe QLSF-2x1,2-3x1,2-13 / Tahun pembuatan 2004. Sistem lengkap termasuk kontrol. Kebutuhan panas 330 kW. Instalasi masih beroperasi! Transportasi lengkap menggunakan truk memungkinkan. Hanya counterweight yang harus dibongkar. Jika diperlukan, sistem pemanas yang sesuai juga dapat disediakan. Pembongkaran/transportasi dapat dilakukan sendiri. Ukuran bangunan lihat gambar terlampir. Djdpfx Aoxt Hwaedgjkg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Set for finger jointing in medium and high-volume production. The machine is technically sound and in good condition. The set includes several sets of tools. Features: – Industrial set with a single tenoner. Operator-supervised bundle loading allows processing of lower-grade raw materials as well, – All functions controlled by microprocessors (automatic control), – Bundle rotation after each operation on a rotary table (butt joint) or flipping the bundle over (furniture joint—unique GOMA solution), – The set includes an automatic press loading station, – Possibility of intermediate cutting on the press, TENONER WITH FEED TABLE Specifications: Milling spindle: Ø 50x210 mm Spindle speed: 6,000 rpm Motor: 18.5 kW Tool dimensions: Ø 250x160 mm Saw spindle trues the end grain Special chipper: Ø 300x8 mm Dedpfelu D Tfox Adgekg Motor: 6 kW / 3,000 rpm Stepless feed table Working width x height: 600 x 30–160 mm Glue nozzle profile according to tool FC-10 PZ6/2 PRESS Specifications: Board width: 30–160 mm Board thickness: 20–70 mm Finished board length: 6,000 mm Pressing force: 3 / 7.5 / 10 T Hydraulic power unit: 3 kW / 140 bar

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, Four-sided beam planer working dimensions: 450x300 mm complete with automatic corner rounding units motorized height and width adjustment Tersa planing cutterheads no. 04 motors, 15 kW each no. 02 roller conveyors, L=6000 mm CE-certified machine with new soundproof cabin Dksdjthmifjpfx Adgeg

Kondisi: baru, Tahun pembuatan: 2024, Crosscut saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Working table inclined by 8° Technical features of the cutting unit: Pneumatic upstroke saw TR500 Motor power 10 HP (7.5 kW), 400V/50Hz TCT blade diameter 500 mm, bore 30 mm, Z=144, S=4.6 Cutting cycle speed: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE FOR LEFT AND RIGHT SIDE Feed via rack-and-pinion system and brushless motor Positioning accuracy +/- 0.4 mm Powerful feed motor for bundle weight of up to 80 kg Maximum feed system speed 90 m/min Pneumatic pusher lift-up at end of cutting cycle and overhead return Data input management: 12” TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port LINUX operating system Loading and saving of machine parameters via USB port Editing and direct input of cutting cycles (patterns) at controller Transferring cutting lists created on PC via USB or Ethernet port Operating software: Manual entry of load board length Partial optimization without board length reading Cutting cycle with 3 optimization options (maximum length, sequence, and board order) Up to 1,000 cutting lists with 11 dimensions or one list with 10,000 consecutive dimensions "OPTI" package: automatic board length detection and full optimization. Piece length reading via photocell Cutting cycle with 6 optimization criteria (longest length, sequence, board order, volume, minimum waste, and priority length) "OPTI PLUS" package: total optimization with knot and defect removal (OPTION NOT INSTALLED ON THE MACHINE) Technical description: “OPTI PLUS” package: for removal of knots and defects Photocell for reading knots and defects during wood mapping Marking with fluorescent chalks/crayons (Note: can only be ordered in combination with ZA250) Pneumatic side clamping device Dsdpfxehw Ng Ij Adgokg

Kondisi: bekas, weinig_powermat_700_2026 Dodpfx Adoxpuufjgskg

Kondisi: siap digunakan (bekas), Forklift truck Manufacturer: Jumbo Model: J60 DC12 Diesel Year of manufacture: 1994 Load capacity: 6,000 kg Own weight: 9,260 kg Lifting height: 4,300 mm Approx. 25,000 operating hours Sale due to switch to wheel loader Dodpfxsvtwuao Adgekg All service and lubrication intervals have been carried out as documented in the inspection logbook! All filters (hydraulic, fuel, torque converter, air) have been replaced annually. Engine oil filter and oil changed every 250 operating hours. Only B0 diesel fuel used (no B7). Available immediately – fully functional Location: Austria, near St. Pölten

Kondisi: sangat baik (bekas), Single-Sided Destacking Station - Upper traverse horizontally movable by 180° - Console table with vacuum clamps - Internal lifting platform with motorized sheet metal roller conveyor - Sliding front safety guard - Separate control cabinet and operator panel - External roller conveyor for stack of sheets from the destacking unit - External powered roller conveyor from destacking unit, also with belt for transferring sheets at 90° - Operating capacity (cycles/min): 12–15 - Sheet thickness (min/max) mm: 10–40 Dkjdpfocggy Ssx Adgjg - Min. sheet dimensions mm: 250 x 320 - Max. sheet dimensions mm: 1200 x 3000 - Total connected load kW: 10

Kondisi: baru, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Μηχανή περιθωριοκόλλησης Hebrock F5 με σύστημα ελέγχου PLC, χωρίς ανάγκη συντήρησης και με επικάλυψη στον ταχέως θερμαινόμενο δοχείο κόλλας, με προδιαμόρφωση για ταχεία αλλαγή δοχείου. Dksdpfx Aswyu Rwjdgsg - Οθόνη αφής 10” - Μέγιστο πάχος ταινίας 3mm - Ελάχιστο μήκος τεμαχίου 160mm - Ταχύτητα προώθησης 7m/min - Έτοιμη για λειτουργία σε περίπου 3,5 λεπτά - Μέγιστη κατανάλωση ισχύος 7,4kW - Ηλεκτρική σύνδεση 400V/3ph/50Hz - Ύψος τραπεζιού 900mm - Διαστάσεις μηχανήματος 4300x1300x1400 mm - Βάρος περίπου 900Kg Επιπλέον δυνατότητες • Κεφαλή προφρεζαρίσματος Whispercut, ύψος τεμαχίου 50mm • Κεφαλή combi cutter • Ακτίνα για στρογγυλοποίηση γωνιών R = 2mm • Στρογγυλοποίηση γωνιών με ακτίνα R = 2mm • Σύστημα ταχείας αλλαγής κινητήρα για στρογγυλοποίηση γωνιών • Ξύστρα πολλαπλής ακτίνας R2/R1 • Μονάδα ψεκασμού διαχωριστικού υγρού • Μονάδα ψεκασμού καθαριστικού υγρού • Προστατευτικός ψεκασμός στην ακμή • Εξοπλισμός nesting για τη μονάδα φρεζαρίσματος και τον ξύστη προφίλ ακτίνας • Πνευματική ρύθμιση τριών σημείων • Πολυεργαλείο (R2/R1/φαλτσοκόπηση) • Εσωτερικός LED φωτισμός

Kondisi: baik (bekas), Edger line / Automatic edging machine / Double edger with automatic measurement and adjustment EWD Esterer Model: DK90 TL 1000 Year of manufacture: 1994 Maximum passage width: 1000 mm Maximum cutting height: 120 mm 2-blade, variable Combimes measurement system with S-conveyor Dkodpfxovg Ecfs Adgjg with cross-cut saw with infeed Esterer ARS TR with 2-strip sliver separator new saw shaft, new bearings, and new chains installed 3 years ago. Includes: External feed for boards to DK90 with tilt destacking with cross conveyor