Alat serut

WEINIG Hydromat 23

Kondisi: bekas, Tahun pembuatan: 1996, Weinig Hydromat 23 Technical Data Lrjdpfxsqrt Eks Al Njp Working width: 30 - 230 mm Working height: 19 - 200 mm Spindles: bottom, right, left, top, bottom b-r-l-t-b (bottom-right-left-top-bottom) without infeed offer is for the machine only Machine has been dismantled and is available immediately Transport can be organised

Kondisi: bekas, 3176 Planer and Moulder WEINIG Hydromat 1000 Used, Year of manufacture: 2007 6 spindles: bottom - right - left - top - top - bottom Electronic feed: 6 - 60 m/min Working width: 80 - 150 mm Working height: 23 - 65 mm Lamella finished width: 4 - 15 mm Max. number of lamellae: 16 pieces Lamella lengths: 400 - 4,000 mm 1st spindle horizontal bottom Brake motor 11 kW, 6,000 rpm Spindle diameter: 45 mm Tool diameter: 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6,000 rpm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle vertical left 7.5 kW, 6,000 rpm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of spindle, swiveling, pneumatic roller pressure 4th spindle horizontal top 15 kW, 6,000 rpm, diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable and swiveling, pneumatic 5th spindle horizontal top as saw spindle Brake motor 37 kW, 5,000 rpm Diameter: 45 mm Axial adjustment reduced to 25 mm Tool diameter: 112 - 250 mm Max. saw depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable and swiveling, pneumatic 6th spindle horizontal bottom as saw spindle Brake motor 30 kW, 5,000 rpm Axial adjustment reduced to 25 mm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. saw depth: 35 mm Axial adjustment: 45 mm Lodeu Agh Sepfx Al Njrp All moulding spindles with high-performance bearings Electronic feed 7.5 kW Feed roller adjustment relative to left spindle, axial 35 mm Shortened roller spacing relative to right spindles Linear meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 powered rollers over table 1 powered, serrated roller in the table, side pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 powered, serrated rollers in outfeed table 2 powered, serrated rollers in the machine table Pressure beam before and discharge after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electric height adjustment for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex site near South Tyrol, without transport and installation Description and price subject to change Transport and loading by us optionally possible To avoid possible misunderstandings, inspection on site by appointment is possible and recommended Sale is as-is Technical specifications, condition description, year of manufacture, and delivery scope as per manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty is provided for used machines; it is sold as seen Images and videos serve as examples and do not constitute the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipment Delivery terms: ex location

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, nomor mesin/kendaraan: 102940, WEINIG HYDROMAT H23 SYSTEM ELECTRONIC FEED FREQUENCY CONTROLLED (8 – 100 M/MIN). FEED MOTOR 22 KW 50MM SPINDLES WORKING WIDTH MAX. 230 MM WORKING HEIGHT MAX. 160 MM SHORT INFEED WITH 220MM TOP FEED ROLLERS BOTTOM 15KW 6,000 RPM, OUTBOARD BEARING, JOINTER READY RIGHT 11KW 6,000 RPM JOINTER READY LEFT 15KW 8,000 RPM JOINTER READY RIGHT 11KW 8,000 RPM JOINTER READY LEFT 15KW 8,000 RPM, JOINTER READY TOP 18.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 11 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY (STRAIGHT JOINTER) + OUTBOARD BEARING TOP 18.5KW 8,000 RPM OUTBOARD BEARING, JOINTER READY (STRAIGHT JOINTER) + OUTBOARD BEARING BOTTOM 22 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY 12X TOP FEED ROLLERS (2X 220MM + 10X 140MM) 7X BOTTOM FEED ROLLERS POSSIBLE TO ADD ADDITIONAL STRAIGHT / PROFILE JOINTERS AS NEEDED AUTOMATIC LUBRICATION SYSTEM FULL DOCUMENTATION INCLUDED MACHINE LENGTH 5.2M Ledozd Tavepfx Al Njrp

Kondisi: sangat baik (bekas), de Lredsyl Rmqepfx Al Nep

Kondisi: baik (bekas), Tahun pembuatan: 2003, Automatic hydraulic press for gluing Kallesoe Type LV 7821 – the press is used for bonding wooden components, e.g., tabletops, with maximum dimensions of 7800 mm x 2100 mm. The glue curing process is accelerated by hot water supplied to the press platen, circulating continuously (it can be supplied from central heating or heated via integrated heating elements on the press). Press heating power: 72 kW Maximum press capacity: up to 2000 m2 / 7.5 hours Ljdpfx Alsrqzgke Nerp Kallesoe Type KL40 glue spreader with loader – designed for the automatic application of adhesive to each lamella and direct feed to the LV7821 press.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Lebar kerja 230 mm Tinggi kerja 160 mm Jumlah spindle 5 Ledox Hzv Tspfx Al Norp Susunan spindle: 1. Bawah 15 kW 2. Kanan 11 kW 3. Kiri 11 kW 4. Atas 15 kW 5. Bawah 7,5 kW Kecepatan putar spindle 6000 rpm Diameter spindle 50 mm 3 rol penarik di meja kerja Kecepatan umpan diatur dengan inverter hingga 60 m/menit Umpan digerakkan dengan poros kardang Penekan pneumatik Dokumentasi teknis Dimensi mesin 300x180x170 cm Berat 3500 kg

Kondisi: sangat baik (bekas), Mesin ketam empat sisi Weinig Hydromat 23C Lebar kerja: 230 mm Tinggi kerja: 160 mm Jumlah spindle: 7 Konfigurasi spindle: 1. Bawah 15 kW 2. Kanan 7,5 kW 3. Kiri 7,5 kW 4. Atas 15 kW 5. Bawah 30 kW (ganda rip saw) 6. Bawah 7,5 kW (penopang hidrolik) 7. Atas 7,5 kW (penopang hidrolik) Kecepatan putar spindle: 6.000 rpm Diameter spindle: 50 mm 4 rol penggerak pada meja kerja Kecepatan pemajuan diatur dengan inverter hingga 36 m/menit Pemajuan didorong oleh poros kardang Penekan pneumatik Dokumentasi teknis Lredpfx Aljxlcufs Nep

Kondisi: bekas, Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, de Ledsxgt U Eepfx Al Nerp

Kondisi: sangat baik (bekas), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roll feed unit Planer moulder equipped with reinforced KASCHWIG three-sided sound insulation cabin • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed speed control (frequency regulated): 8 – 80 m/min • Feed motor: 18.5 KW • 1st bottom spindle: 11.0 KW • 2nd right spindle: 11.0 KW • 3rd left spindle: 11.0 KW • 4th right spindle: 11.0 KW • 5th left spindle: 11.0 KW • 6th top spindle: 15.0 KW • 7th bottom spindle: 11.0 KW Lrodpfxswvqkls Al Nep • 8th top spindle: 15.0 KW • 9th bottom spindle: 15.0 KW • 10th universal spindle: 11.0 KW (four-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindles equipped with NEW motor start/ brake combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven table rollers • Spindles 1 + 6 + 7 + 8 + 9 with counter bearing • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chrome plated table plates • Hard-chrome plated fences • Pneumatically assisted side pressure rollers • Automatic table lubrication • Centralised lubrication points • Freestanding control panel • Total connected load approx. 145 KW / approx. 400 A • Freestanding control cabinet • Operating manual, spare parts list and circuit diagram • Machine supplied without planing heads Machine dimensions approx.: • Length 6,000 mm • Width 2,250 mm • Height 1,800 mm • Weight approx. 8,500 KG Factory-new WEINIG components installed: NEW horizontal / vertical spindles NEW counter bearings All spindles with HL bearing arrangement All motors newly fitted with bearings NEW electronic motor soft-start / brake units NEW hard-chrome plated table plates NEW hard-chrome plated fences Numerous additional NEW PARTS installed in the machine Condition: Refer to attached photos. Technically in excellent condition. Infeed mechanisation unrefurbished – complete parts – functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by prior arrangement Subject to prior sale and errors excepted.

Kondisi: baik (bekas), Tahun pembuatan: 1997, WEINIGHYDROMAT23DE Ledpfxjy Iwrte Al Norp

Kondisi: sangat baik (bekas), WEINIG Rondamat 909, S/N 93362, Year 2001 – Ref. No. 119131 WEINIG Rondamat R 909, machine for automatic sharpening of straight knives in planer heads • Automatic indexing • Planer head diameter min. 85 mm to max. 225 mm • Maximum tool length 330 mm (table stroke 440 mm) • Unlimited number of knives Lrsdpfx Ajwvql Njl Njp • Continuously adjustable clearance angle 15° – 35° • Grinding spindle speed n=4000 rpm • Grinding wheel D=125 mm, bore d=20 mm • Grinding motor 1.1 kW, n=2850 rpm • Feed motor 0.053 kW, n=1300 rpm • Grinding speed 650 mm/min • Indexing motor 0.033 kW, n=1.00 rpm • Selectable number of grinding cycles per tool 1 – 5 • Coolant pump motor 0.065 kW, n=2900 rpm • Coolant / tank capacity approx. 115 liters • Clamping arbor D=50 x 330 mm • Machine complete with accessories Machine dimensions • Width 1,150 mm • Depth 820 mm • Height 1,200 mm • Weight 450 kg Condition: 100% function-tested = AS NEW condition Price: On request Payment: Before handover/loading Viewing: Anytime by appointment Errors and prior sale excepted