Planer dan moulder

WEINIG Hydromat H25R

Kondisi: sangat baik (bekas), Planing width: 250 mm Planing height: 120 mm 1. Bottom spindle 2. Right spindle 3. Left spindle 4. Right spindle 5. Top spindle 6. Bottom spindle Bwedpfowlk E Isx Aa Tsi 7. Bottom spindle 8. Universal spindle 360° - Hydraulic feed 6–60 m/min - 10x driven table rollers - Spindle diameter: 50 mm

Kondisi: bekas, Tahun pembuatan: 2001, Timber dimensions to be processed: Input lengths min/max: 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max: 40 - 300 mm Input thicknesses min/max: 15 - 120 mm Maximum timber cross-section: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw, min./max.: 510 – 2800 mm Special application: Cutting blocks, length min/max: 100 – 200 mm (Note: Multiple block lengths in new sorting; blocks are transported to the end of the sorting line and fall into customer-supplied mesh boxes) Cut-off/trimming tolerance: +/- 0.8 – 1.5 mm (for timber with minimal resin content and even surface. Tolerance up to 1m fixed length max.; tolerance for longer parts up to 2.5m). Thickness tolerance: +/- 3 mm Curvature of timbers in any direction: max. 10 mm per meter length Timber species: Softwood or hardwood System performance: Feed speed: steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 sec To attain the practical daily capacity, effectiveness factors dependent on the customer’s production conditions must be considered. Bwjdsw Sy T Hspfx Aa Toi Infeed height and saw: 900 mm (To be mounted on customer-side platform, saw requires concrete base) Sorting height: 2000 mm Connection data: Total electrical connected load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Maximum voltage fluctuation: 5 % Compressed air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint color: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Non-driven support roller, front end in front of sheet metal table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera for detection of defect markings Pos. 4: Automatic contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version, with built-in waste chute, includes equipment package for large timber cross-sections Graphic input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control Processing capability: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on the outfeed conveyor Location: Nattheim

Kondisi: sangat baik (bekas), Independent machine – universal machine (first & second position in a production line) Bwjdowhmdfjpfx Aa Toi Electronic control – EasyLing programmer Safe and soundproof enclosure No. 3+3 vertical columns for supporting the processing units Min. usable working width (mm): 240 Max. usable working width (mm): 3,100 Min. usable working thickness (mm): 3 Max. usable working thickness (mm): 150 Retractable positioning cams, spacing (mm): 800 Feed rate (min/max), infinitely variable (m/min): 4 – 24 Total power No. 4 processing units (for each side of the machine): Scoring unit Automatic scoring unit 1 x 3 kW (6,000 RPM) Planing unit 1 x 6 kW (6,000 RPM) 0–10° Universal milling unit (electropneumatically controlled) 1 x 6 kW (6,000 RPM) 0–90° Universal milling unit 1 x 6 kW (6,000 RPM) 0–90°

Kondisi: sangat baik (bekas), Stehle S820 (automatische Gerade-Messerschleifmaschine). Bitte prüfen Sie Ihren Spam-Ordner, falls Sie innerhalb von 24 Stunden nach Absenden Ihrer Anfrage keine Antwort erhalten! Technische Daten: • Max. Werkzeugbreite: 330 mm • Werkzeugdurchmesser für Hobelköpfe (Messerwellen, min.-max.): 120 - 230 mm • Schleifscheibendrehzahl: 2.850 / 5.750 U/min • Schleifen von 2 bis 12 Messern pro Kopf möglich (mit Indexplatte) Bsdpfx Asq Dzkuea Towi • Indexplatten für 4, 6, 8, 10 und 12 Messer im Lieferumfang enthalten • Antriebsleistung Schleifscheibe: 1,3 kW • Freiwinkel: 10 - 35° • Kühlmitteltank: 125 l • Motorleistung Kühlmittelpumpe: 0,28 kW • Anschlusswerte gesamt: 2 kW Bitte prüfen Sie Ihren Spam-Ordner, falls Sie innerhalb von 24 Stunden nach Absenden Ihrer Anfrage keine Antwort erhalten!

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 500 h, Fungsionalitas: berfungsi sepenuhnya, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain after the finger jointing press, foldable - Drying paternoster, approx. 7 m, for board lengths up to 6 m - Separation and zero saw - Conveyor belt for residual wood disposal - Stacking unit - Strip magazine not included in the sale - Package cross conveyor Bedpewclkysfx Aa Tewi The machine is in very good condition, very little used The machine is still installed but available immediately

Kondisi: bekas, Tahun pembuatan: 2021, diameter mata gergaji: 800 mm, kecepatan rotasi (min.): 1.450 rpm, daya: 5,5 kW (7,48 hp), Cross-cut saw AS Very good, well-maintained condition Saw blade diameter: 800 mm Robust steel tube base frame High-performance saw motors Pneumatic material clamps (3 units, vertical) Two-hand safety operation Coolant system Bwjdpfx Aaod Szf No Tsi Protective cover Optionally available with length measuring system or automatic positioning system Also available as saw-drilling or saw-punching automatic machine upon request.

Kondisi: baik (bekas), The debarker is perfectly suited for processing both hardwood and softwood logs. - Trolley made of heavy-duty steel construction - 5 pairs of drive wheels - Milling arm constructed from heavy-duty steel - Hydraulic milling head Bodpfstuyr Iox Aa Tswi - 22 kW motor Please note: The log feeder visible in the photo is not included in the offer and is available at an additional cost of 25,000 PLN / 5,500 EUR.

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 1999, Fungsionalitas: tidak berfungsi, Mesin prisma Storti 4x35 HP Masuk rol Keluaran Kabinet kontrol Bwedolxqk Rspfx Aa Toi Mesin untuk restorasi

Kondisi: baik (bekas), Tahun pembuatan: 2001, 1 Bjdpfoi U Dxuox Aa Tjwi

Kondisi: sangat baik (bekas), ketinggian potong (maks.): 120 mm, lebar pemotongan (maks.): 700 mm, Straightening machine, Machine No. 188 Hydraulic width adjustment, electrically adjustable Feed rate adjustment steplessly variable from 0 to 80 m/min Drive motor 37 kW with V-belt pulley, motor tensioning rail Various saw head assemblies, spacer rings, and saw blades Bwjdpfxjv Raqxj Aa Tji Infeed table with individual supports Fixed outfeed table The machine has been completely overhauled and is in excellent condition.