Perangkat pengaturan pisau

WEINIG

Kondisi: bekas, Tahun pembuatan: 2000, lebar total: 1.500 mm, tinggi total: 1.700 mm, 678cb-wo4en Iodpfownh Ekjx Akpeic

Kondisi: sangat baik (bekas), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roll feed unit Planer moulder equipped with reinforced KASCHWIG three-sided sound insulation cabin • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed speed control (frequency regulated): 8 – 80 m/min • Feed motor: 18.5 KW • 1st bottom spindle: 11.0 KW • 2nd right spindle: 11.0 KW • 3rd left spindle: 11.0 KW • 4th right spindle: 11.0 KW • 5th left spindle: 11.0 KW • 6th top spindle: 15.0 KW • 7th bottom spindle: 11.0 KW • 8th top spindle: 15.0 KW • 9th bottom spindle: 15.0 KW • 10th universal spindle: 11.0 KW (four-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindles equipped with NEW motor start/ brake combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven table rollers • Spindles 1 + 6 + 7 + 8 + 9 with counter bearing • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure Isdpfxowvqklo Akpsic • Reduced feed roller spacing • Hard-chrome plated table plates • Hard-chrome plated fences • Pneumatically assisted side pressure rollers • Automatic table lubrication • Centralised lubrication points • Freestanding control panel • Total connected load approx. 145 KW / approx. 400 A • Freestanding control cabinet • Operating manual, spare parts list and circuit diagram • Machine supplied without planing heads Machine dimensions approx.: • Length 6,000 mm • Width 2,250 mm • Height 1,800 mm • Weight approx. 8,500 KG Factory-new WEINIG components installed: NEW horizontal / vertical spindles NEW counter bearings All spindles with HL bearing arrangement All motors newly fitted with bearings NEW electronic motor soft-start / brake units NEW hard-chrome plated table plates NEW hard-chrome plated fences Numerous additional NEW PARTS installed in the machine Condition: Refer to attached photos. Technically in excellent condition. Infeed mechanisation unrefurbished – complete parts – functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by prior arrangement Subject to prior sale and errors excepted.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin serut empat sisi BMH Coroprofil 32 320x160mm Lebar kerja: 320 mm Tinggi kerja: 160 mm Jumlah spindle: 6 Pengaturan spindle: Bawah 9,2 kW Kanan 7,5 kW Kiri 7,5 kW Atas 11 kW Iedpfszd Eg Iex Akpeic Kanan 7,5 kW Kiri 7,5 kW Diameter spindle: 40 mm Spindle samping dapat diatur pada dua bidang Posisi mesin secara elektronik Kecepatan umpan: 4-24 m/menit

Kondisi: bekas, Diameter lubang 35 mm Diameter lingkaran putar 50 mm Satu set cincin antara atau cincin jarak dengan alur pasak 10 mm untuk digunakan pada berbagai mesin pengolah kayu, khususnya mesin serut. Gambar serupa. Set tersedia: 3 Iiodpfx Akszdvbiopoc

Kondisi: bekas, 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal treatment system / thermal chamber for wood modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler plant that uses thermal oil as a heat transfer medium. Technical Data: Capacity: 5,950 – 9,900 m³ of wood per year (at 330 operating days) Usable volume: 9 m³ (at 50 mm wood thickness) Stack dimensions: 10,500 x 1,300 x 1,100 mm (L x W x H) Minimum board thickness: 10 mm Electrical connection: 3 x 400 V, 50 Hz + Neutral + Earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating capacity: 2 MW (230°C – 250°C thermal oil) Heat consumption: 120 kWh/m³ of wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm Duplex stainless steel EN 4462 Hydraulically operated door with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Operating temperature: 0°C to 220°C 200 mm glass wool insulation, clad with 1 mm galvanized steel sheet Main Components: 1. Autoclave for the heat treatment process 2. Vacuum system for evacuating the autoclave before heat is applied 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 per side) Material: Stainless steel tubes (sea water resistant) Total area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Iijdpov Si Szofx Akpsc Control and Operation: Control system: WTT ExoT (fully automatic) Display: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature probes 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6,000 mm length) Functional Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of the customer, ex location near 5020 Salzburg (Austria), without dismantling, transport or assembly Dismantling, loading, and transport by us optionally available Subject to error in description and price To avoid misunderstandings, an on-site inspection is possible and recommended by appointment Sale as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; sold as inspected Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to pickup or shipment Delivery terms: ex location

Kondisi: bekas, Diameter bor 50 mm Panjang 260 mm Sistem pisau: pisau planer strip Diameter lingkar putar 200 mm Iiedpfx Aezdva Sokpsc Jumlah pisau 12(6) unit Material baja 6 bilah penjepit hilang.

Kondisi: sangat baik (bekas), b579fda7 Isdszdq H Tspfx Akpeic

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, Wir bieten diese gebrauchte IWT Moldrup-SPP Hydro-Thermal-Behandlungsanlage an. Industrielle MOLDRUP-SPP-Anlage zur hydro-thermischen Modifikation von Holz mit einem Durchmesser bis Ø 2.600 mm und einer Länge bis 12.000 mm. Die Anlage ist aus robustem Edelstahl gefertigt und für den kontinuierlichen industriellen Betrieb mit vollautomatischer SPS-Steuerung ausgelegt. Industrielle Hydro-Thermal-Holzmodifikationsanlage – Ø2.600 x 12.000 mm Industrielle hydro-thermische Behandlungsanlage, konstruiert für eine effiziente und gleichmäßige thermische Modifikation von Holz in einer kontrollierten, sauerstofffreien Umgebung. Iiodpeymxqajfx Akpoc Die Anlage basiert auf einem schweren Edelstahlautoklaven mit den Maßen Ø2.600 mm × 12.000 mm, der pro Charge etwa 15–22 m³ Holz aufnehmen kann und für einen Betriebsdruck bis zu 12 bar (absolut) ausgelegt ist. Die vollautomatische SPS-Steuerung ermöglicht eine präzise Kontrolle von Vakuum, Druck, Temperatur und mehrstufigen Prozesszyklen. Das integrierte Vakuumsystem gewährleistet eine sichere Sauerstoffentfernung, während das Thermoöl-Heizsystem für eine exakte Temperaturführung während des gesamten Behandlungsprozesses sorgt. Die komplette Installation umfasst den Druckbehälter, das Heizsystem, die Vakuumpumpe, den Umluftventilator, die Kondensatbehandlung, das Beschickungssystem mit Fahrwagen sowie sämtliche Sicherheitseinrichtungen. Ein Thermoöl-Kesselaggregat sowie eine Emissionskontrolleinrichtung sind enthalten. Technische Dokumentation auf Anfrage verfügbar. Die gesamte hydro-thermische Holzbehandlungsanlage wird wie gesehen / wie sie steht und liegt verkauft. Bei Fragen oder für weitere Informationen senden Sie uns gerne eine Nachricht oder rufen Sie uns an.

Kondisi: bekas, Weinig Powerlock L=240 Z=2 kepala dengan profil grooving bawah Tipe 536, diameter 93 mm 536.095.04 Centrolock sistem pisau bolak-balik Z2 Penjepitan: PowerLock HSK Panjang: 240 mm Ijdpfxszdq Hts Akpoic Harga: 425 Euro

Kondisi: diremaj di bengkel (bekas), 1 x electronic motor brake EMG15 Power range: 3 to 15 kW Voltage range: 200-575V 50 Hz/60 Hz Siemens EMG 15 Motor brake for Weinig planing machine Unimat and Hydromat Iodpfx Aozdpc Tekpjic

Kondisi: baru, 1 Iiedpfx Akou Imfuopsc

Kondisi: belum diuji (bekas), Tahun pembuatan: 1999, Spindle slotting unit 1 pc. Number of milling units 4 pcs. Spindle diameter 50 mm Control Weinig PC-Nexus # 7015 Weinig Unicontrol 6 with NC spindles ----- Machine available for inspection in operation until September 2026 Technical Data Summary (additional included accessories if any, please inquire) Item 1: Cross-cut saw ----- > Cross-cut saw electronic, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for cut detection > NC length stop, mounted on the slotting table included Positioning of the cross-cut saw integrated in the control. > Length 3500 mm Item 2: Tenoning and slotting spindle ----- > Number of tools: variable, infinitely adjustable NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm NC axis > Spindle speed: 3,500 rpm > Spindle diameter: 50 mm > Maximum tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (climb and counter-rotation) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Maximum tool diameter: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely adjustable NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm NC axis > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Maximum tool diameter: 232 mm > Motor power: 11 kW Item 5: Horizontal top profiling milling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Maximum tool diameter: 130 mm > Axial adjustment: 2 positions > Radial adjustment: 2 positions Item 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment: 3 positions > Radial adjustment: 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 210 mm > Motor power: 3.0 kW Other features ----- > Online-capable > Sash rebate device for tear-free rebating > Double part package > Return feed unit for single-operator use: Lamella conveyor > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC, PC control/NEXUS > Without machining tools ----- Price of the above-mentioned machine on request! ----- Iijdpfjzdk Hysx Akpjc Option at extra charge: EUR 6,500.00 Note on used tools: We currently have used Gold tools, stock no. #2790 Window tools Gold IV78 wood and IV78 wood/aluminum Previously used on Weinig Unicontrol 10; for use on Unicontrol 6, an additional jointing cutter is required. Tool set for FIXED-STROKE or CNC spindle machines 80 and 95 mm stroke (tool set, where technically possible, prepared for IV 92) Wood-aluminum tool set for FIXED-STROKE machines 80 and 95 mm stroke - supplementary tools 1 set Stehle IV68 wood also included Without bla...

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, I am selling a complete window manufacturing set: - 1 unit tenoning and slotting machine Weinig Unitec 10 - 1 unit profiling and overlay centre Weinig Univar 10 Iisdpfx Asfzzhyjkpoc - Year of manufacture: 1998 - Cutter heads by OERTLI - Available immediately - Total price: 17,000 EUR - Condition: very good

Kondisi: siap digunakan (bekas), 4 telescopic drawers, dimensions: 450 x 600 mm Height-adjustable drawers, currently set for fill heights of 100, 120, 250, and 320 mm Required space: 720 x 550/750 x 1170 mm Isdpfx Aoixzzrskpjic

Kondisi: bekas, Lubang bor 50 mm Panjang 150 mm Sistem pisau RVZ Diameter lintasan 150 mm Isdpjzc Rx Usfx Akpoic Jumlah pisau 4 buah Material baja Stok gudang belum pernah digunakan. Set = 2 buah.