Mesin pembentuk

Weinig Powermat 2400 (7 spindle 50mm)

Kondisi: bekas, de-to-hu-it-lt-001 Dodpfx Aajw H Iv Tsdjcf

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X-axis: 4,300 mm X-axis pendulum operation: 1,620 mm Y-axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X-axis: 3,300 mm X-axis pendulum operation: 600 mm Y-axis: 1,240 mm Work table: 8 ATS workpiece supports, each with 3 vacuum cups 8 rear workpiece stops, retractable via program, integrated in each support 8 workpiece stops, 670 mm from rear, integrated in each support 2 + 2 lateral workpiece stops 4 removable center stops 6 pneumatic lifting rails, retractable via program, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups EPS (Electronic Positioning System) Automatic central lubrication Division of the vacuum system into 2 separate working zones in X direction Auxiliary vacuum system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 m³/h Machining head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, each individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, 120 mm diameter fixed in X direction Grooving saw, 120 mm diameter fixed in Y direction Routing spindle 13.2 kW (11 kW S1-duty), HSK 63 F Mounted on Z1 axis Speed range 1,000–24,000 rpm Right and left rotation C-axis 360 degrees for aggregate adapters Cleaning nozzle for cleaning the milled edge prior to the edge banding operation Tool magazine for 16 tools Edge banding unit suitable for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360° infinite rotation Glue application for hot melt adhesive Double pressure roller, exchangeable and disconnectable Heating lamp for pre-heating edge material End trimming unit for cutting edge material at an 8-degree angle to the workpiece edge using a circular saw blade Technical Data: Plastic edge thickness 0.4–3 mm (*) Solid edge thickness 0.4–2 mm (*) (Best results are achieved using wood edges with primer, 0.4–1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. internal radius 18 mm, for edge thickness below 1 mm Min. internal radius 30 mm, with edge thickness 2 mm Minimum panel size for edging 300 x 300 mm Minimum internal cutout size for edging 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine, this solution restricts pendulum operation. Roll diameter of edge material: 800 mm Safety features: * Pressure-sensitive mats in front of the machine * Protective fence on the right with access door No tools included Control: PC control with BIESSE WORKS ADVANCED Dodpfx Aaexraimsdecf Restart after emergency stop BIESSE WORKS office version Aggregates: - Flush/Radius milling aggregate - Combination unit profile/flat scraper blade - Sawing aggregate

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Max. machining length: 180 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 2.2 [kW] - Minimum C-axis resolution: 0.001 [deg] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 1.5 [kW] - Minimum C-axis resolution: 0.001 [deg] BUSH HOLDER 1 - Number of positions: 9 - Number of driven positions: 4 - Driven tool speed: 6,000 [rpm] - Travel X/Y: 50/325 [mm] FRONT TOOL POST - Number of positions: 4 SUB OPERATIONS - Number of positions: 4 ELECTRICAL SUPPLY - Supply voltage: 400 [V] MACHINE HOURS - Power-on hours: 31,902 [h] - Spindle hours: 12,146 [h] EQUIPMENT - Control: Fanuc 32-iB - Interface: USB - Part catcher - Parts conveyor belt - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump * with paper filter - Bar feeder: IEMCA 338-HD Dedpjuha Slofx Aadecf - Coolant reservoir - Electrical transformer - Number of driven tool holders: 3

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, tahun perombakan terakhir: 2023, For sale: a complete and fully operational steel sheet roll forming line, suitable for processing coil materials such as Magnelis into any desired profiles, such as C-profiles commonly used in photovoltaic installations and farms, steel hall construction, shelters, as well as for furniture manufacturing, etc. The line, including an uncoiler, is installed in a heated hall under near-laboratory conditions. Prospective buyers can arrange for a test run prior to purchase. I have contacts to suppliers of profiling roll sets for specific profiles, as well as to companies specializing in machine upgrades and expansions. Further information strictly by phone only – I do not respond to written messages. A VAT invoice will be issued for the production line. Location: Poland, near the Ukrainian border (city: Krosno). Dcsdju A U Utepfx Aadof

Kondisi: bekas, Tahun pembuatan: 2007, Double spindle machining centre in 5-axis configuration (double-sided) Travel paths x/y/z = 600/600(975)/500 mm Number of spindles: 2 Spindle distance: 600 mm Rapid traverse: 45 m/min Spindle speed up to: 17,500 rpm Dodpotgu Ixsfx Aadocf Drive power: 38 kW Tool magazine: 2 x 72 tool positions Tool holder: HSK 63 CNC control: Siemens 840D 1 x Tool breakage monitoring 2 x Clamping bridge supports H75 mm 2 x Clamping bridges 5th axis Coolant unit: Knoll, 70 bar 1 x Chip conveyor KB1000 1 x Drilling head indexing 2 x Tool flatness monitoring systems 2 x Retrofit kits for torsion compensation A-/U-axis

Kondisi: baik (bekas), de-Weinig Hydromat H23 50 mm Spindeln, 6.000 U/min Unterspindel 15 kW, hobelfertig Rechte Spindel 11 kW, hobelfertig Linke Spindel 11 kW, hobelfertig Rechte Spindel 11 kW, hobelfertig Linke Spindel 11 kW, hobelfertig Obere Spindel 15 kW, hobelfertig Untere Spindel 11 kW, hobelfertig (Geradhobel) + Lagerbock Obere Spindel 11 kW, hobelfertig (Geradhobel) + Lagerbock Untere Spindel 15 kW, hobelfertig Zusätzliche Gerade- oder Profil-Hobelaggregate können nach Bedarf nachgerüstet werden!!! Vorschubmotor 15 kW Automatisches Schmiersystem Lieferung mit Ein- und Auslauf-Förderern optional möglich. Dodpfowmw Nvox Aadocf Werkzeugausstattung kann bei Bedarf angeboten werden.

Kondisi: baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 265864, diameter pembubutan: 350 mm, kecepatan spindel (maks.): 5.000 rpm, kecepatan spindel (min.): 35 rpm, jarak pergerakan sumbu X: 195 mm, jarak gerak sumbu Z: 560 mm, daya motor spindle: 15 W, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan sumbu Z: 33 m/menit, torsi: 233 Nm, jarak dari tengah meja ke hidung spindel: 687 mm, Perlengkapan: dokumentasi / manual, Mazatrol Smart-Steuerung. Spindeldrehzahl: 5.000 min⁻¹. Verfahrweg X/Z: 195 mm / 560 mm. Ausgestattet mit einem Spannfutter, Ø 215 mm. 3-Backen-Kraftspannfutter. 12-fach Revolver. Reitstock. Werkzeugvermessung. Dcedpfx Aajvfm H Aodjf Teilefänger.

Kondisi: baik (bekas), BRANDT Highflex 1440 Edgebander Well-equipped, available for inspection before purchase. Pre-milling cutters Glue application Pneumatic pre-cut guillotine Dsdet Hxxpepfx Aadocf Pressure rollers Finishing saws Top and bottom pre-milling unit 2 x multi-function milling units Profile scraper Flat scraper Polishing unit The machine features NC control for the milling units and a pneumatic package. Max workpiece height: 60mm Max edge tape thickness (coil): 3mm Feed speed max: 14m/min Well-maintained machine, in very good condition.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 10006565, Weinig Powermat 1500 Working width: 30 - 310 mm (with tool flying circle 93-125 mm) Working height: 100 - 200 mm (with tool flying circle 93-125 mm) Number of spindles: 6 Bottom spindles: 2 Right spindles: 1 Left spindles: 1 Top spindles: 2 Spindle arrangement: bottom-right-left-top-top-bottom Maximum spindle speed: 8,000 rpm Spindle diameter: 40 mm Powerlock tool holder Including beveling unit Separate motor for each spindle Electronic feed including brake, steplessly adjustable 5-40 m/min Durofer pointed-tooth feed rollers Short infeed table, 1.2 m long, with 2 powered rollers above the table Machine table surface with hard coating Manual lubricant pump WEINIG Comfort Set Control system: WEINIG MEMORY PLUS-SYSTEM Dedpfxorq Ebfe Aadocf CE marking Declaration of conformity

Kondisi: bekas, Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, tinggi kerja: 720 mm, Perlengkapan: dokumentasi / manual, Insulating glass production line without sealing robot Djdpfxewikn Rj Aadecf Max. glass size: 2500 x 1600 mm Min. glass size: 250 x 180 mm Gas filling press: models and triple glazing possible