Panel kontrol / keypad membran WEINIG Rondamat 912

WEINIG Rondamat 912

Kondisi: bekas, Hymmen CombiCoater ELX-S 1400 paint line with UV dryer. - Technical data will be provided shortly Fjdpelf H Tcjfx Adgjpb - For self-dismantling and self-collection.

Tahun pembuatan: 2011, Kondisi: sangat baik (bekas), This is a complete production line for house construction. Prices are listed for each individual item. Consisting of the following components (see the attached document as well): Images to follow; they are already included in the attached document. Table 1 (Laying in and clamping the frame construction) €34,500 - Height-adjustable longitudinal transport with 3 hinge conveyors and facing layer - Pneumatic cross clamping - Connections for compressed air and electricity Table 2 (Laying the first facing layer and fastening) €25,300 - Longitudinal transport with 3 hinge conveyors and facing layer - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate transport, 3 m long €4,600 (Parking station for multifunction bridge) - Longitudinal transport with 3 hinge conveyors Table 3 (Laying the second facing layer, fastening, and flipping the element onto the next table) €35,650 - Longitudinal transport with 3 hinge conveyors and facing layer - Pneumatic cross clamping - Connections for compressed air and electricity - Hydraulic turning device Table 4 (Installation of electrical components and insulation) €34,500 - Cross transport with rollers and facing layer - Table cross travel - Connections for compressed air and electricity - Hydraulic turning device Table 5 (Laying the first facing layer and fastening the second side) €32,775 - Longitudinal transport with 3 hinge conveyors - Cross transport with rollers - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate transport, 3 m long €4,600 (Parking station for multifunction bridge) - Longitudinal transport with 3 hinge conveyors Table 6 (Laying the second facing layer and fastening) €28,750 - Longitudinal transport with 3 hinge conveyors - Pneumatic cross clamping - Connections for compressed air and electricity Table 7 (Assembly and distribution table) €29,900 - Longitudinal transport with 3 hinge conveyors - Hydraulic swivel unit - Table cross travel unit - Upper guide for holding wall elements vertically Manual surface portal with vacuum lifter on Table 2 €13,800 (Laying the first facing layer) - Lifting capacity 85 kg with Schmalz vacuum system - Steel substructure with low-friction rails - Working range 12 x 5 m Manual surface portal with vacuum lifter on Table 3 €13,800 (Laying the second facing layer) - Lifting capacity 85 kg with Schmalz vacuum system - Steel substructure with low-friction rails - Working range 12 x 5 m Manual surface portal with vacuum lifter on Table 5 €13,800 Fpsdpfxeu D Amgs Adgjb (Laying the first facing layer on the second side) - Lifting capacity 85 kg with Schmalz vacuum system - Steel substructure with low-friction rails - Working range 12 x 5 m Manual surface portal with vacuum lifter on Table 6 €13,800 (Laying the second facing layer on the second side) - Lifting capacity 85 kg with Schmalz vacuum system - Steel substructure with low-friction rails - Working range 12 x 5 m Wall storage rack 1: 12 m long x 24 tracks €11,500 Wall storage rack 2: 12 m long x 20 tracks Vacuum lifter with column slewing crane €9,200 1 Abus spreader beam 2 t €20,125 1 spreader beam 2 t

Kondisi: siap digunakan (bekas), Tipping destacking for layer separation Fpodpeuzht Tofx Adgeb Stack lath separator with conveyor belt Layer transport to the layer buffer Layer buffer with separation before the feed unit Layer patterns for the two separated timbers including transfer belts, for example to the stacking machine

Kondisi: sangat baik (bekas), Stehle S820 (automatische Gerade-Messerschleifmaschine). Bitte prüfen Sie Ihren Spam-Ordner, falls Sie innerhalb von 24 Stunden nach Absenden Ihrer Anfrage keine Antwort erhalten! Technische Daten: • Max. Werkzeugbreite: 330 mm • Werkzeugdurchmesser für Hobelköpfe (Messerwellen, min.-max.): 120 - 230 mm • Schleifscheibendrehzahl: 2.850 / 5.750 U/min • Schleifen von 2 bis 12 Messern pro Kopf möglich (mit Indexplatte) • Indexplatten für 4, 6, 8, 10 und 12 Messer im Lieferumfang enthalten • Antriebsleistung Schleifscheibe: 1,3 kW • Freiwinkel: 10 - 35° Fsdpfx Asq Dzkuedgspb • Kühlmitteltank: 125 l • Motorleistung Kühlmittelpumpe: 0,28 kW • Anschlusswerte gesamt: 2 kW Bitte prüfen Sie Ihren Spam-Ordner, falls Sie innerhalb von 24 Stunden nach Absenden Ihrer Anfrage keine Antwort erhalten!

Kondisi: baru, Tahun pembuatan: 2025, CHIPPER MACHINE, brand KÄLIN Hobeltechnik, model MPC-P: • Approximate production of wet shavings: 3,800 kg/h • Log carriage dimensions: 2,800mm x 1,100mm x 1,300mm Fsdpfx Adjvk Saxegepb • Maximum log length: 2,650mm • 2 symmetrical, removable cutter heads of 1,140mm each, divided into 3 sections of: - Diameter: 200mm - Length: 380mm - Number of knives: 8 - Cutter heads can be sharpened as a complete unit, without needing to remove the knives - ULTRA-FAST CUTTER HEAD CHANGE, less than 15 minutes! • 2 spare sets of cutter heads for replacement during the sharpening process • Cutter head motor power: 90kW / 120 HP • Carriage speed controlled by ELECTRONIC INVERTER: 0.6 to 36 m/min • Automatic control of the feed-to-load ratio • 1 feed drive motor, heavy-duty double chain drive: 15kW / 20 HP • Material level control system within the carriage to prevent running empty • Electrical cabinet and control panel with touch screen for function management • Lower motorized discharge conveyor for shavings: 5,000 mm x 800 mm • Weight: 11,000 kg • CE-compliant

Kondisi: bekas, 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal treatment system / thermal chamber for wood modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler plant that uses thermal oil as a heat transfer medium. Technical Data: Capacity: 5,950 – 9,900 m³ of wood per year (at 330 operating days) Usable volume: 9 m³ (at 50 mm wood thickness) Stack dimensions: 10,500 x 1,300 x 1,100 mm (L x W x H) Minimum board thickness: 10 mm Electrical connection: 3 x 400 V, 50 Hz + Neutral + Earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating capacity: 2 MW (230°C – 250°C thermal oil) Heat consumption: 120 kWh/m³ of wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm Duplex stainless steel EN 4462 Hydraulically operated door with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Operating temperature: 0°C to 220°C 200 mm glass wool insulation, clad with 1 mm galvanized steel sheet Main Components: 1. Autoclave for the heat treatment process 2. Vacuum system for evacuating the autoclave before heat is applied 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 per side) Material: Stainless steel tubes (sea water resistant) Total area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Display: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature probes 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6,000 mm length) Functional Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification Fedpfx Adjv Si Szjgopb 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of the customer, ex location near 5020 Salzburg (Austria), without dismantling, transport or assembly Dismantling, loading, and transport by us optionally available Subject to error in description and price To avoid misunderstandings, an on-site inspection is possible and recommended by appointment Sale as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; sold as inspected Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to pickup or shipment Delivery terms: ex location

Kondisi: bekas, 3176 Planer and Moulder WEINIG Hydromat 1000 Used, Year of manufacture: 2007 6 spindles: bottom - right - left - top - top - bottom Electronic feed: 6 - 60 m/min Working width: 80 - 150 mm Working height: 23 - 65 mm Lamella finished width: 4 - 15 mm Fpsdpsu Agh Ssfx Adgob Max. number of lamellae: 16 pieces Lamella lengths: 400 - 4,000 mm 1st spindle horizontal bottom Brake motor 11 kW, 6,000 rpm Spindle diameter: 45 mm Tool diameter: 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6,000 rpm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle vertical left 7.5 kW, 6,000 rpm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of spindle, swiveling, pneumatic roller pressure 4th spindle horizontal top 15 kW, 6,000 rpm, diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable and swiveling, pneumatic 5th spindle horizontal top as saw spindle Brake motor 37 kW, 5,000 rpm Diameter: 45 mm Axial adjustment reduced to 25 mm Tool diameter: 112 - 250 mm Max. saw depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable and swiveling, pneumatic 6th spindle horizontal bottom as saw spindle Brake motor 30 kW, 5,000 rpm Axial adjustment reduced to 25 mm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. saw depth: 35 mm Axial adjustment: 45 mm All moulding spindles with high-performance bearings Electronic feed 7.5 kW Feed roller adjustment relative to left spindle, axial 35 mm Shortened roller spacing relative to right spindles Linear meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 powered rollers over table 1 powered, serrated roller in the table, side pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 powered, serrated rollers in outfeed table 2 powered, serrated rollers in the machine table Pressure beam before and discharge after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electric height adjustment for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex site near South Tyrol, without transport and installation Description and price subject to change Transport and loading by us optionally possible To avoid possible misunderstandings, inspection on site by appointment is possible and recommended Sale is as-is Technical specifications, condition description, year of manufacture, and delivery scope as per manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty is provided for used machines; it is sold as seen Images and videos serve as examples and do not constitute the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipment Delivery terms: ex location

Kondisi: bekas, Станок для закругления кромок WemaProbst RHM 200 Fedpov Ii Tkofx Adgspb

Kondisi: bekas, nomor mesin/kendaraan: IDC000031, Trommel zur Spänetrocknung Länge – 14 m Breite – 3,6 m Fpsdpfx Adsrl Ra Hjgeb Trocknungsleistung – 10 t/h

Tahun pembuatan: 2000, Kondisi: bekas, Brucks 100 HP chopper Infeed and discharge conveyor, hopper, sieve Fpedpelxqiljfx Adgeb The machine is sold as is.