Mesin penajam

WEINIG Rondamat 909

Kondisi: sangat baik (bekas), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roll feed unit Planer moulder equipped with reinforced KASCHWIG three-sided sound insulation cabin • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed speed control (frequency regulated): 8 – 80 m/min • Feed motor: 18.5 KW • 1st bottom spindle: 11.0 KW • 2nd right spindle: 11.0 KW • 3rd left spindle: 11.0 KW • 4th right spindle: 11.0 KW • 5th left spindle: 11.0 KW • 6th top spindle: 15.0 KW Iaodowvqklepfx Am Rou • 7th bottom spindle: 11.0 KW • 8th top spindle: 15.0 KW • 9th bottom spindle: 15.0 KW • 10th universal spindle: 11.0 KW (four-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindles equipped with NEW motor start/ brake combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven table rollers • Spindles 1 + 6 + 7 + 8 + 9 with counter bearing • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chrome plated table plates • Hard-chrome plated fences • Pneumatically assisted side pressure rollers • Automatic table lubrication • Centralised lubrication points • Freestanding control panel • Total connected load approx. 145 KW / approx. 400 A • Freestanding control cabinet • Operating manual, spare parts list and circuit diagram • Machine supplied without planing heads Machine dimensions approx.: • Length 6,000 mm • Width 2,250 mm • Height 1,800 mm • Weight approx. 8,500 KG Factory-new WEINIG components installed: NEW horizontal / vertical spindles NEW counter bearings All spindles with HL bearing arrangement All motors newly fitted with bearings NEW electronic motor soft-start / brake units NEW hard-chrome plated table plates NEW hard-chrome plated fences Numerous additional NEW PARTS installed in the machine Condition: Refer to attached photos. Technically in excellent condition. Infeed mechanisation unrefurbished – complete parts – functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by prior arrangement Subject to prior sale and errors excepted.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, jam operasional: 9.500 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3284, Versi standar RUF Lignum R2 dengan saluran keluar, motor listrik 22 kW, ukuran briket 150x60 mm, kapasitas hingga 500 kg/jam Iajdpfx Ajyyl Srjm Rsu

Kondisi: bekas, 3176 Planer and Moulder WEINIG Hydromat 1000 Used, Year of manufacture: 2007 6 spindles: bottom - right - left - top - top - bottom Electronic feed: 6 - 60 m/min Working width: 80 - 150 mm Working height: 23 - 65 mm Lamella finished width: 4 - 15 mm Max. number of lamellae: 16 pieces Lamella lengths: 400 - 4,000 mm 1st spindle horizontal bottom Brake motor 11 kW, 6,000 rpm Spindle diameter: 45 mm Tool diameter: 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6,000 rpm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle vertical left 7.5 kW, 6,000 rpm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of spindle, swiveling, pneumatic roller pressure 4th spindle horizontal top 15 kW, 6,000 rpm, diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable and swiveling, pneumatic 5th spindle horizontal top as saw spindle Brake motor 37 kW, 5,000 rpm Diameter: 45 mm Axial adjustment reduced to 25 mm Tool diameter: 112 - 250 mm Max. saw depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable and swiveling, pneumatic 6th spindle horizontal bottom as saw spindle Brake motor 30 kW, 5,000 rpm Axial adjustment reduced to 25 mm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. saw depth: 35 mm Axial adjustment: 45 mm Iedpfx Amju Agh Sj Rjau All moulding spindles with high-performance bearings Electronic feed 7.5 kW Feed roller adjustment relative to left spindle, axial 35 mm Shortened roller spacing relative to right spindles Linear meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 powered rollers over table 1 powered, serrated roller in the table, side pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 powered, serrated rollers in outfeed table 2 powered, serrated rollers in the machine table Pressure beam before and discharge after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electric height adjustment for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex site near South Tyrol, without transport and installation Description and price subject to change Transport and loading by us optionally possible To avoid possible misunderstandings, inspection on site by appointment is possible and recommended Sale is as-is Technical specifications, condition description, year of manufacture, and delivery scope as per manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty is provided for used machines; it is sold as seen Images and videos serve as examples and do not constitute the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipment Delivery terms: ex location

Kondisi: bekas, 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal treatment system / thermal chamber for wood modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler plant that uses thermal oil as a heat transfer medium. Technical Data: Capacity: 5,950 – 9,900 m³ of wood per year (at 330 operating days) Usable volume: 9 m³ (at 50 mm wood thickness) Stack dimensions: 10,500 x 1,300 x 1,100 mm (L x W x H) Minimum board thickness: 10 mm Electrical connection: 3 x 400 V, 50 Hz + Neutral + Earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating capacity: 2 MW (230°C – 250°C thermal oil) Heat consumption: 120 kWh/m³ of wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm Duplex stainless steel EN 4462 Hydraulically operated door with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Operating temperature: 0°C to 220°C 200 mm glass wool insulation, clad with 1 mm galvanized steel sheet Main Components: 1. Autoclave for the heat treatment process 2. Vacuum system for evacuating the autoclave before heat is applied 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 per side) Material: Stainless steel tubes (sea water resistant) Total area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Display: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature probes 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6,000 mm length) Functional Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of the customer, ex location near 5020 Salzburg (Austria), without dismantling, transport or assembly Dismantling, loading, and transport by us optionally available Ijdpfx Amsv Si Szj Rsau Subject to error in description and price To avoid misunderstandings, an on-site inspection is possible and recommended by appointment Sale as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; sold as inspected Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to pickup or shipment Delivery terms: ex location

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Viessmann Vitoplex 100 LS with Weishaupt WM-G10/4A Iaodpetrl Skefx Am Rou

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard Ijdpfx Amoh Ek Dae Rjau - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: bekas, Tahun pembuatan: 1996, Vollmer CHC 260 Iasdpfxsyuc Ifs Am Reu Tahun pembuatan: 1996

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, daya: 5 kW (6,80 hp), ketinggian potong (maks.): 200 mm, lebar pemotongan (maks.): 1.300 mm, diameter mata gergaji: 550 mm, panjang pemotongan (maks.): 3.200 mm, lebar potong di pagar rip: 1.300 mm, panjang meja geser: 3.200 mm, Exhibition machine F 45 Elmo Drive - Tilting +/- 45° - Cutting height 200 mm - Scoring unit preparation No. M24038 - Double roller carriage with 3200 mm - Mitre angle stop 3200 mm Digit L - CNC rip fence 1300 mm - Duplex mitre fence 1350 mm manual - Template holder Iodpfouh R R Ejx Am Roau - On/off switch on the double roller carriage - Front support roller

Kondisi: baik (bekas), Tahun pembuatan: 2000, Weinig High Mech E6 Zuführung + A5 Ausförderung + Stapelanlage 1. Weinig Paket-Zuführ-Rollenbahn. 2. Weinig Paket-Kipper. 3. Weinig Flachketten-Quereinzug mit Einzelbretteinzug. 4. Weinig Ausschleus-Sortiereinheit mit Rollenbahnen. 5. Weinig EM814 Hobelmaschinen-Zuführung mit Flachketteneinzug. 6. Weinig Ausführung 3m Förderband-Beschleuniger. 7. Rollenbahn mit Quereinzug-Kettenausschiebern. 8. Weinig Quereinzug-Pufferförderband. 9. Weinig Flachketten-Stapler mit Scherenhub-Rollenbahn. 10. Weinig Paket-Auslauf-Rollenbahnen. Iodpfx Aewgbw Rjm Roau Optional ist ein zusätzliches Weinig Bündelungssystem erhältlich.

Kondisi: bekas, nomor mesin/kendaraan: IDC000031, Trommel zur Spänetrocknung Ijdpfxorl Ra Hs Am Reau Länge – 14 m Breite – 3,6 m Trocknungsleistung – 10 t/h