Lini penyerutan Weinig Unimat + Uniplan

Weinig Unimat + Uniplan

Kondisi: bekas, Tahun pembuatan: 2005, Unimat 23 E: Working width (with cutting circle 140 mm): 20 – 230 mm Working height (with cutting circle 163 mm): 8 - 120 mm 1st spindle lower horizontal spindle: 7.5 kW 2nd spindle right vertical spindle: 11 kW (shared with left vertical spindle) 3rd spindle left vertical spindle 4th spindle upper horizontal spindle: 7.5 kW Spindle diameter each: 50 mm Spindle speed each: 8,000 rpm Feed system: 4 kW Mechanical feed, infinitely variable: 5–24 m/min Working table length: 2.5 m (including jointing fence) Uniplan 23: Max. working width: 230 mm Min. working height: 15 mm / Max. working height: 120 mm Feed: 3 kW Horizontal spindles each: 5.5 kW Feed speed, infinitely variable: 6–36 m/min Spindle speed: 6,000 rpm Iajdpovvkciofx Aa Nsl Spindle diameter: 50 mm Tool clamping length: 240 mm Max. tool cutting circle: 163 mm Fixed chip removal below: 0.5 mm Short-piece package for min. wood length: 280 mm Mechanical spindle brakes up to 7.5 kW Brake system for feed up to 5.5 kW 1st feed roller cycled with photocell -Spindle speed 7,200 rpm, incl. motor power 7.5 kW -Improved sound insulation on the complete safety enclosure. Location: Customer

Kondisi: baru, Tahun pembuatan: 2024, Crosscut saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Working table inclined by 8° Technical features of the cutting unit: Pneumatic upstroke saw TR500 Motor power 10 HP (7.5 kW), 400V/50Hz TCT blade diameter 500 mm, bore 30 mm, Z=144, S=4.6 Cutting cycle speed: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE FOR LEFT AND RIGHT SIDE Feed via rack-and-pinion system and brushless motor Positioning accuracy +/- 0.4 mm Powerful feed motor for bundle weight of up to 80 kg Maximum feed system speed 90 m/min Pneumatic pusher lift-up at end of cutting cycle and overhead return Data input management: 12” TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port LINUX operating system Loading and saving of machine parameters via USB port Editing and direct input of cutting cycles (patterns) at controller Transferring cutting lists created on PC via USB or Ethernet port Operating software: Manual entry of load board length Partial optimization without board length reading Cutting cycle with 3 optimization options (maximum length, sequence, and board order) Up to 1,000 cutting lists with 11 dimensions or one list with 10,000 consecutive dimensions "OPTI" package: automatic board length detection and full optimization. Piece length reading via photocell Cutting cycle with 6 optimization criteria (longest length, sequence, board order, volume, minimum waste, and priority length) "OPTI PLUS" package: total optimization with knot and defect removal (OPTION NOT INSTALLED ON THE MACHINE) Technical description: “OPTI PLUS” package: for removal of knots and defects Photocell for reading knots and defects during wood mapping Marking with fluorescent chalks/crayons (Note: can only be ordered in combination with ZA250) Ijdpshw Ng Isfx Aa Nsal Pneumatic side clamping device

Kondisi: baik (bekas), Tahun pembuatan: 2004, en-Weinig Unimat 23 EL Year of manufacture: 2004 Working width: 230 mm, working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake 2. Right spindle with independent 7.5 kW motor and spindle brake Speed 8,000 rpm with high-performance ball bearings, NC axis with frequency inverter, axial stops milled to 35 mm height 3. Left spindle with independent 7.5 kW motor, speed 8,000 rpm with high-performance ball bearings, NC axis with frequency inverter, radial pneumatic pressure guide for different workpiece widths up to 200 mm 4. Top spindle with 7.5 kW motor and spindle brake, speed 8,000 rpm with high-performance ball bearings, radial NC axis Pneumatic axial control, traverse path 40 mm, glass bead discharge, pneumatically sequenced. - Feed system with 4 kW motor and feed brake - Short piece processing package - UC-Matic package consisting of: PLC control, central motor starting, workpiece monitoring, control terminal, free-standing control cabinet, free-standing operator panel, magnetic interlock of safety hood - Enhanced sound insulation - Automatic dressing and feeding system for different workpiece lengths and widths Workpiece dimensions: Length: 400 – 3,500 mm (4,000 mm) Width: 40 – 200 mm Thickness: 20 – 100 mm Driven conveyor belt Belt width: 250 mm, transport length: 4,500 mm, additional light barrier for signal transmitter Weinig Hydro Fine Planer Uniplan 23 Year of manufacture: 2004 Working width: 230 mm, working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm 2. Top spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm, radial NC axis - First feed roller sequenced with photo sensors - NC axis for separate feed height adjustment - Improved sound insulation Iodowyuluepfx Aa Njal - UC-Matic package - 2 Hydro straight cutter heads 501 with HSS planing knives 30 mm x 3 mm, max. 9,000 rpm, dimensions 163 mm x 230 mm x 50 mm, Z=4

Kondisi: bekas, Tahun pembuatan: 2007, RA1784 Galler OMEGA pallet racking system, used, 16,600 x 5,400 x 1,350 mm Set up inside a hall Rack height: 5,400 mm Rack depth: 1,350 mm Clear bay width: 3,200 mm Stored goods: Pallets with stored goods Depth storage: 1,350 mm Storage configuration: 1. Stored goods on the floor 2nd to 5th stored goods on beam pairs, Beam pair shelf load at a clear bay width of 3,200 mm and shelf height of 1,500 mm: 2,100 kg Bay load: 8.4 t at 1,500 mm buckling length (min. 4 bays) →All load ratings apply for evenly distributed load. Finish: Upright frames: Sendzimir galvanized Load beams: RAL 7035 light grey WITH RUST SPOTS (SUPERFICIAL) Installation: 1 pc. single-sided racking bay, placed against a hall wall 5 x 3,300 + 100 = Total length 16,600 mm Consisting of: 6 pc. Galler Omega upright frames, bolted 5,400 x 1,350 mm 40 pc. Galler Sigma beams 3,200 mm 80 pc. safety pins Price net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Würzburg Optionally available if required: 2 pc. used corner rack protectors At the beginning/end and at entrances Isdpfxek Abbbs Aa Njal for rack upright protection For individual and professional advice, simply contact us. You can reach us by phone or email. We are happy to assist with the planning and implementation of your projects. We look forward to hearing from you. Best regards Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007,

Kondisi: bekas, Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, lebar total: 400 mm, daya: 26 kW (35,35 hp), DATA TEKNIS Lebar kerja maks.: 400 mm Tinggi kerja: 2 - 150 mm Panjang benda kerja min.: 150 mm Tinggi meja kerja: 900 mm Motor listrik: Daya motor planer plat tipis: 22,0 kW Motor penggerak: 3,0 kW Motor pengangkat: 0,50 kW Alat: Kecepatan rotor: Dengan kecepatan penggerak yang dapat diatur: 2.100–3.000 rpm Jumlah pisau: 48 buah. Iajdpfjw Thpfsx Aa Nel

Kondisi: hampir baru (bekas), DE_Beschreibung Maximale Werkstückbreite, mm: 1150 Maximale Werkstückdicke, mm: 120 Iaodpfx Aohm E Ixja Njl Vorschubgeschwindigkeit, m/min: 5-20 Gesamtmaße, mm: 5000x3000x2800 Leistung, kW: 139 Gewicht, kg: 11000 Maschine für die Unterseite-Bearbeitung (Unterflurschleifen): Bearbeitungseinheit 1: Kontaktwalze Durchmesser 250 mm Bearbeitungseinheit 2: Kontaktwalze Durchmesser 250 mm Bearbeitungseinheit 3: Schleifschuh Maschine für die Oberseite-Bearbeitung (Oberschleifen): Bearbeitungseinheit 1: Kontaktwalze Durchmesser 250 mm Bearbeitungseinheit 2: Kontaktwalze Durchmesser 250 mm Bearbeitungseinheit 3: Schleifschuh

Tahun pembuatan: 2014, Kondisi: bekas, ProLogic window construction software FenOffice 14 Conturex Ijdpjrci S Sefx Aa Noal

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), Weinig High-Mech A4 Bündelungsanlage Bündelbildungs- und Verpackungseinheit, kombinierbar mit anderen Weinig-Abnahme- und Handlingsystemen aus Lagerbestand, wie Pufferstrecken und Staplern. Iajdpfx Aajq Rvrbs Nel Bestehend aus: 1. Weinig 815-300 Hochgeschwindigkeits-Bündelungsaggregat 2. Weinig 812-200 Auslauf-Rollenbahn mit Querverschub 3. Schaltschrank mit Siemens S7-300 CPU

Kondisi: baik (bekas), Kecepatan makan: 10–40 m/menit Jarak: pagar rol ke garis gergaji 230 mm Jarak: rol makan ke garis gergaji 159 mm Jarak antar gergaji: 5 mm hingga 180 mm Ukuran pisau gergaji: 6050 x 100 x 1,06 mm hingga maks 1,24 mm Isdpsxhfx Sofx Aa Njal Kecepatan pisau gergaji: 35 m/detik Diameter roda gergaji: 915 mm Daya motor gergaji: 2 x 15 kW Daya motor makan: 1,1 kW dengan inverter Tangki pelumasan pisau gergaji: 2 x 6 l Tegangan: 400 volt, 50 Hz Berat sekitar 6000 kg