Vierseitenhobelmaschine Weinig Unimat 17A

WEINIG Unimat 17A

Kondisi: baik (bekas), Tahun pembuatan: 1981, Untuk pertanyaan: Zoltán Utasi Plus 36 30 205 7380 Konfigurasi spindle: Bawah Kanan Kiri Atas Bawah Kecepatan spindle: 6000 rpm Lebar kerja: 170 mm Tinggi kerja: 120 mm Panjang meja jointer: 2 m Dilengkapi dengan pompa Waxilit Kecepatan feeding variabel tanpa tingkat: 7–18 m/menit Iedey Nmv Dopfx Akpoth Roller tekanan samping Penyesuaian balok tekanan bermotor Dilengkapi dengan 5 kepala pemotong (3 pcs L180 mm, 2 pcs L130 mm) Dokumentasi mesin tersedia

Kondisi: sangat baik (bekas), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roll feed unit Planer moulder equipped with reinforced KASCHWIG three-sided sound insulation cabin • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed speed control (frequency regulated): 8 – 80 m/min • Feed motor: 18.5 KW • 1st bottom spindle: 11.0 KW • 2nd right spindle: 11.0 KW • 3rd left spindle: 11.0 KW • 4th right spindle: 11.0 KW • 5th left spindle: 11.0 KW • 6th top spindle: 15.0 KW • 7th bottom spindle: 11.0 KW • 8th top spindle: 15.0 KW • 9th bottom spindle: 15.0 KW • 10th universal spindle: 11.0 KW (four-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindles equipped with NEW motor start/ brake combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven table rollers • Spindles 1 + 6 + 7 + 8 + 9 with counter bearing • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chrome plated table plates • Hard-chrome plated fences • Pneumatically assisted side pressure rollers • Automatic table lubrication • Centralised lubrication points • Freestanding control panel • Total connected load approx. 145 KW / approx. 400 A • Freestanding control cabinet • Operating manual, spare parts list and circuit diagram • Machine supplied without planing heads Machine dimensions approx.: • Length 6,000 mm • Width 2,250 mm • Height 1,800 mm • Weight approx. 8,500 KG Factory-new WEINIG components installed: NEW horizontal / vertical spindles NEW counter bearings All spindles with HL bearing arrangement All motors newly fitted with bearings NEW electronic motor soft-start / brake units NEW hard-chrome plated table plates NEW hard-chrome plated fences Numerous additional NEW PARTS installed in the machine Isdjwvqklspfx Akpsth Condition: Refer to attached photos. Technically in excellent condition. Infeed mechanisation unrefurbished – complete parts – functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by prior arrangement Subject to prior sale and errors excepted.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1981, FOUR-SIDED PLANER MOULDING MACHINE WEINIG UNIMAT 17 A Equipped with 5 spindles Technical specifications: - Working width: max. 180 mm - Working height: 120 mm - Spindle speed: 6000 rpm - Spindle diameter: 40 mm - Minimum tool diameter: 100 mm - Maximum tool diameter: 160 mm - Maximum diameter of the vertical spindles: 180 mm - Maximum tool diameter on the 2nd right spindle: 195 mm Ijdpfx Ajgqrunskpeth - Maximum tool diameter on the top spindle: 200 mm - Maximum tool diameter on the bottom spindle: 180 mm - Feed rate, variable: 7–18 m/min - Throughfeed with spring pressure - Chain transmission (non-cardanic) Spindle arrangement: 1st spindle: bottom horizontal (planer), 4 kW 2nd spindle: right vertical, 3 kW 3rd spindle: left vertical, 4 kW 4th spindle: top horizontal, 5.5 kW 5th spindle: bottom horizontal, 4 kW Includes 1 set of planing tools Voltage: 380 V / 50 Hz SECOND-HAND MACHINE IN GOOD CONDITION, TESTED IN OUR WORKSHOP PRIOR TO DELIVERY

Kondisi: bekas, 3176 Planer and Moulder WEINIG Hydromat 1000 Used, Year of manufacture: 2007 6 spindles: bottom - right - left - top - top - bottom Electronic feed: 6 - 60 m/min Working width: 80 - 150 mm Working height: 23 - 65 mm Lamella finished width: 4 - 15 mm Max. number of lamellae: 16 pieces Lamella lengths: 400 - 4,000 mm 1st spindle horizontal bottom Brake motor 11 kW, 6,000 rpm Spindle diameter: 45 mm Tool diameter: 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6,000 rpm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle vertical left 7.5 kW, 6,000 rpm Diameter: 45 mm Itedpju Agh Sefx Akpjh Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of spindle, swiveling, pneumatic roller pressure 4th spindle horizontal top 15 kW, 6,000 rpm, diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable and swiveling, pneumatic 5th spindle horizontal top as saw spindle Brake motor 37 kW, 5,000 rpm Diameter: 45 mm Axial adjustment reduced to 25 mm Tool diameter: 112 - 250 mm Max. saw depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable and swiveling, pneumatic 6th spindle horizontal bottom as saw spindle Brake motor 30 kW, 5,000 rpm Axial adjustment reduced to 25 mm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. saw depth: 35 mm Axial adjustment: 45 mm All moulding spindles with high-performance bearings Electronic feed 7.5 kW Feed roller adjustment relative to left spindle, axial 35 mm Shortened roller spacing relative to right spindles Linear meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 powered rollers over table 1 powered, serrated roller in the table, side pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 powered, serrated rollers in outfeed table 2 powered, serrated rollers in the machine table Pressure beam before and discharge after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electric height adjustment for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex site near South Tyrol, without transport and installation Description and price subject to change Transport and loading by us optionally possible To avoid possible misunderstandings, inspection on site by appointment is possible and recommended Sale is as-is Technical specifications, condition description, year of manufacture, and delivery scope as per manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty is provided for used machines; it is sold as seen Images and videos serve as examples and do not constitute the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipment Delivery terms: ex location

Kondisi: bekas, de-unimat-500-desc Itedpfx Ajya Hh Tekpoh

Kondisi: bekas, Tahun pembuatan: 1980, 3192 Four-Side Planer WEINIG U 17 A Used, year of manufacture: 1980. The machine will be available from February 2025. Machine is still in operation. Ijdpsvkhccsfx Akpsth - 6 spindles - Spindle arrangement: bottom – right – left – top – bottom – bottom - Working width: 170 mm (with a tooling diameter of 125 mm) - Working height: 120 mm (with a tooling diameter of 125 mm) - Joinery spindle: 4 HP - All other spindles: 5.5 HP each - Feed motor: 2 or 3 HP - Spindle speed: 6,000 rpm - Working spindle diameter: 40 mm - Smallest cutterhead diameter: 100 mm - Largest cutterhead diameter: 180 mm - Stepless, continuous feed adjustment: 6 – 18 m/min - Feed roller diameter (hardened): 140 mm - Feed roller width: 50 mm - Adjustment range for infeed table and right jointer fence: 10 mm - Adjustment range for vertical spindles below table: 40 mm - Axial adjustment range for horizontal spindles: 30 mm - Planer table length: 2 m Sale on behalf of a customer, ex location Upper Austria, without dismantling, transport, or installation. Errors in description and price excepted. Dismantling, transport, and loading by us optionally available. To avoid misunderstandings, inspection on site by prior arrangement is possible and recommended. Sale as-is. Technical data, condition description, year of manufacture, and scope of delivery as per manufacturer’s brochure and/or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded, applies: “sold as inspected.” Images and videos are examples and do not represent the actual delivery scope. Payment terms: Prices plus statutory VAT, payment before collection or shipment. Delivery terms: ex location.

Kondisi: bekas, nomor mesin/kendaraan: 209, Spindelpresse Tränklein SP Serien-Nr. 209 Pressfläche maximal 300 x 400 mm Online-Video-Inspektion via Skype-Video möglich. Wir freuen uns auf Ihren Besuch – weitere Maschinen auf Lager. Sofort verfügbar – Besichtigung möglich. Lagerort: Emskirchen/Nürnberg – Testlauf vor Ort möglich. Itsdpfxeupy Tgo Akpsh

Tahun pembuatan: 1990, Kondisi: diremaj di bengkel (bekas), 4-sided planer Weinig, 7-head, universal, head arrangement: bottom horizontal, right vertical, left vertical, right vertical, top horizontal, bottom horizontal, and the last one universal. Drive is provided via cardan shafts. The drive is protected with Rotax couplings. Workpiece feed is pneumatic. Feed speed is smoothly adjustable by frequency inverter. Machine feed speed: 0–42 m/min. Motors: 2.5 kW and 7.5 kW. Table newly ground and new. Additionally, new cabling and new electrics. Machine after complete overhaul. Warranty included. Isdpfjpqxnxjx Akpsth

Kondisi: baik (bekas), Tahun pembuatan: 1989, Fungsionalitas: belum diuji, lebar kerja: 220 mm, tinggi penyerutan: 120 mm, diameter spindel: 50 mm, lebar perataan: 220 mm, tinggi kerja: 120 mm, berat keseluruhan: 7.500 kg, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 6.000 rpm, jenis penyesuaian ketinggian: listrik, jenis arus masuk: tiga fasa, jumlah spindel: 10, daya: 105 kW (142,76 hp), frekuensi input: 50 Hz, Perlengkapan: kabin, rem mesin, Weinig Hydromat 22 B With grooved bed 10 spindles, Working width: 220 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 7.5 kW / 8–40 m/min, Spindle arrangement: 1 – Bottom (7.5 kW) – with hydraulic clamping 2 – Right (7.5 kW) 3 – Left (11 kW) 4 – Right (7.5 kW) – with jointer 5 – Left (7.5 kW) 6 – Top (15 kW) – with hydraulic clamping 7 – Bottom (7.5 kW) – with hydraulic clamping Isdpfx Akou Udd Sopsth 8 – Top (7.5 kW) – with hydraulic clamping and jointer 9 – Bottom (7.5 kW) – with hydraulic clamping and jointer 10 – Universal (7.5 kW) 6 powered feed rollers in the table

Tahun pembuatan: 1987, Kondisi: siap digunakan (bekas), A four-side planing machine from Weinig, including automation, double cross-cut saw, infeed, and extraction system, is available. 1) Weinig Hydromat 22 BL four-sided planer with automatic lubrication, year of manufacture: 1987, working width: 220 mm, working height: 140 mm, number of cutterheads: 7, arrangement: bottom/right/left/right/top/bottom/bottom, spindle diameter: 50 mm. 2) Automation unit by Kellfass consisting of double cross-cut saw, length: 5000 mm, buffer cross conveyor, and pneumatic roller infeed. On-site inspection is possible. Iedov T Apcjpfx Akpsth