Planer dan moulder

Weinig Unimat 23 EL, Uniplan 23

Kondisi: bekas, Slot spindle 1 pc. Number of milling units: 5 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely inspected prior to delivery ----- Technical Data Summary (additional accessories possibly included upon request) Pos. 1: Crosscut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment pneumatically controlled in 8 positions, e.g., for edge rounding from above > Laser alignment light for recognizing the saw section Pos. 2: Rounding Unit Horizontal Bottom ----- > Position: horizontal bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9000 rpm > Max. tool diameter: 130 mm > Axial adjustment mechanically coupled to crosscut saw > Radial adjustment pneumatically controlled on/off NC-controlled length stop Dkodpfx Adjvu Hghogsg ----- > Length: 3500 mm > Electronic length stop Pos. 3: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless, NC-controlled > Spindle speed: 3,500 rpm > Max. tool diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 4: 1st Profiling Spindle (climb and conventional milling) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 7.5 kW Pos. 5: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless, NC-controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash bar guide consisting of: Guide fence on the stop (area of climb-cut spindle), Sash bar support rail from above in the area of vertical right profiling unit and profiling spindle. Pos. 6: Profiling/Milling Unit, Horizontal Top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial adjustment: 30 mm, 8 positions > Radial adjustment: 125 mm, 8 positions Pos. 7: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions > Radial adjustment: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool diameter: 210 mm > Motor power: 3.0 kW Pos. 8: Profiling/Grooving Unit from Below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > ...

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Set for finger jointing in medium and high-volume production. The machine is technically sound and in good condition. The set includes several sets of tools. Features: – Industrial set with a single tenoner. Operator-supervised bundle loading allows processing of lower-grade raw materials as well, – All functions controlled by microprocessors (automatic control), – Bundle rotation after each operation on a rotary table (butt joint) or flipping the bundle over (furniture joint—unique GOMA solution), – The set includes an automatic press loading station, – Possibility of intermediate cutting on the press, TENONER WITH FEED TABLE Specifications: Milling spindle: Ø 50x210 mm Spindle speed: 6,000 rpm Motor: 18.5 kW Tool dimensions: Ø 250x160 mm Saw spindle trues the end grain Special chipper: Ø 300x8 mm Dksdpfjlu D Tfex Adgjg Motor: 6 kW / 3,000 rpm Stepless feed table Working width x height: 600 x 30–160 mm Glue nozzle profile according to tool FC-10 PZ6/2 PRESS Specifications: Board width: 30–160 mm Board thickness: 20–70 mm Finished board length: 6,000 mm Pressing force: 3 / 7.5 / 10 T Hydraulic power unit: 3 kW / 140 bar

Kondisi: sangat baik (bekas), Calibrating and Fine Grinding Machine with 1 Grinding Unit, 1 Motor, Processing from Above Working width: 1000 mm Abrasive belt dimensions: 2200 x 1030 mm Workpiece dimensions: 3 - 170 mm Table height adjustment motor: 0.18 kW, 400 V, 50 Hz Main motor: 7.5 kW, 400 V, 50 Hz 2 feed speeds: 5.5 & 11 m/min 1st Unit: Combination unit, grinding roller, rubber-coated, 90 Shore / pneumatically operated sanding pad Sanding pad NEW 2nd Unit: Cleaning brush Compressed air requirement: approx. 6 bar Extraction port diameter: 200 mm Approximate dimensions L x W x H: 1385 x 1980 x 1900 mm Weight: approx. 1800 kg Automatic workpiece thickness adjustment with digital display Abrasive belt oscillation Emergency stop for sanding belt with disc brakes Table extension with 3 exit rollers Dksdpfx Adsudxchsgeg Emergency stop button Main switch CONVEYOR BELT AS NEW – replaced by us approx. 3 years ago MORE THAN 30 PCS WIDE BELT SANDING BELTS INCLUDED Note on used machines: • Technical specifications subject to error and prior sale. • Prices quoted are ex-works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We will only respond to inquiries including your address and telephone number!)

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 260 mm, tinggi penyerutan: 170 mm, diameter spindel: 40 mm, lebar perataan: 260 mm, tinggi kerja: 170 mm, daya motor pengumpan: 4.000 W, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 6.000 rpm, jenis penyesuaian ketinggian: listrik, jumlah spindel: 5, frekuensi input: 50 Hz, Perlengkapan: kabin, rem mesin, Weinig Profimat 23 E Working width: 260 mm Working height: 170 mm 5 spindles Spindle diameter: 40 mm Dsdpfovgnb Rsx Adgjkg Spindle arrangement: 1- Bottom - 5.5 kW 2- Right + 3- Left - 11 kW 4- Top - 5.5 kW 5- Bottom - 11 kW Feed speed: 6 – 24 m/min - 4 kW Air cushion table Driven roller at outfeed table Supplied with tooling.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, Four-sided beam planer working dimensions: 450x300 mm complete with automatic corner rounding units motorized height and width adjustment Tersa planing cutterheads no. 04 motors, 15 kW each Dsdpfxethmifs Adgekg no. 02 roller conveyors, L=6000 mm CE-certified machine with new soundproof cabin

Kondisi: sangat baik (bekas), Tahun pembuatan: 1994,

Kondisi: bekas, Tahun pembuatan: 2004, Instalasi finger joint setengah otomatis yang ringkas terdiri dari: - Mesin frais PJ 150/500 Dedpfx Aow Nbacjdgjkg - Meja transfer untuk penyerahan manual - Press satu kanal PJ 7/6100 li Mesin frais: 2 paket/menit Press: 2 siklus/menit Panjang masuk: 150 – 700 mm Panjang akhir: maks. 6.100 mm

Kondisi: bekas, Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, lebar pemotongan (maks.): 625 mm, Hundegger joinery machine with mechanization Dodpfxsv Ubtco Adgskg 5 axes Working width: 625 mm with tools

Kondisi: bekas, WEINIG Profimat 26 Super Planer/Moulder Dkodpfewqda Njx Adgog Working width: 20 - 230 mm (260 mm) Working height: 8 - 120 mm (140 mm) 5 working spindles, spindle diameter 40 mm Long infeed table (approx. 2000 mm) Bottom spindle: 4 kW / Left and right spindles: 7.5 kW each / Top spindle: 5.5 kW / Bottom finishing spindle: 5.5 kW Pneumatic pressure for feed rollers Cardan shaft feed, infinitely variable: 5 - 24 m/min Infeed roller before jointer Push-button control panel Automatic lubricant pump Mechanical digital readouts Machine in CE-compliant design Year of manufacture: 2001 Sold without processing tools Machine is WORKSHOP OVERHAULED and in GOOD CONDITION The machine is connected and ready for demonstration in the exhibition center Available from stock Lieboch

Kondisi: baru, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Nagelneue Friulmac EQ 004 2.5 mit Zufuhrband und Aufgabe-Trichter Touchscreen-Bedienung und automatische Verstellung Bearbeitungslänge: min. 190 mm – max. 2.500 mm Bearbeitungsbreite: min. 30 mm – max. 250 mm Materialstärke: min. 12 mm – max. 35 mm Vorschubgeschwindigkeit: 6 – 25 m/min 2 x 2 Hobelaggregat: 3 kW – 720 U/min Hauptprofilieraggregat: 4 kW – 7.200 U/min Für weitere Informationen kann ich Ihnen die Originaldokumentation zusenden. Dkedpfx Aovupm Dedgsg