Pemotongan irisan moulder

WEINIG UNIMAT 23E

Kondisi: bekas, Tahun pembuatan: 2000, Four-side Planer and Moulder Weinig Unimat 23E for planing and profiling timber on all four sides, featuring a movable spindle for automatic adjustment and a grooved bed (optionally available without a grooved bed) for short and curved workpieces, as well as a long straightening table. Included: Set of grooved bed cutters Optional: Conversion to a conventional smooth table available on request. Spindles: 5 Spindle 1: Bottom / 40 mm / 5.5 kW Spindle 2: Right / 40 mm / 7.5 kW Spindle 3: Left / 40 mm / Shared motor with spindle 2 Spindle 4: Top / 40 mm / 7.5 kW Spindle 5: Bottom / 40 mm / 5.5 kW Working width: 230 mm Itedpfxjwztw So Aahsr Working height: 160 mm

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 260 mm, tinggi penyerutan: 170 mm, diameter spindel: 40 mm, lebar perataan: 260 mm, tinggi kerja: 170 mm, daya motor pengumpan: 4.000 W, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 6.000 rpm, jenis penyesuaian ketinggian: listrik, jumlah spindel: 5, frekuensi input: 50 Hz, Perlengkapan: kabin, rem mesin, Weinig Profimat 23 E Working width: 260 mm Working height: 170 mm 5 spindles Spindle diameter: 40 mm Spindle arrangement: 1- Bottom - 5.5 kW 2- Right + 3- Left - 11 kW 4- Top - 5.5 kW 5- Bottom - 11 kW Feed speed: 6 – 24 m/min - 4 kW Itjdsvgnb Repfx Aahsr Air cushion table Driven roller at outfeed table Supplied with tooling.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 255 mm, tinggi penyerutan: 160 mm, diameter spindel: 40 mm, lebar perataan: 255 mm, tinggi kerja: 160 mm, daya motor pengumpan: 3.000 W, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 6.000 rpm, jenis penyesuaian ketinggian: listrik, diameter poros mesin serut: 40 mm, jenis arus masuk: tiga fasa, jumlah spindel: 5, frekuensi input: 50 Hz, Perlengkapan: kabin, rem mesin, Weinig Unimat 23 E with 5 spindles, working width: 255 mm, working height: 160 mm, spindle diameter: 40 mm, feed: 3 kW / 6 – 36 m/min, spindle arrangement: 1-bottom (5.5 kW), 2-right (5.5 kW), 3-left (7.5 kW), 4-top (5.5 kW), 5-bottom (4.0 kW). One powered roller in the table at the outfeed. Ijdpfx Asxg Sa Heahjtr

Kondisi: bekas, Tahun pembuatan: 1999, Vierseitenhobel Ijdswnh Sqspfx Aahetr

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, en-GB Ijdpfx Aedqzcxsahotr

Kondisi: bekas, Number of spindles: 6 units Working width: 230 mm Planing height: 120 mm Jointing table length: 2000 mm Feed motor: 4 kW Feed speed: 5–24 m/min 1 WEINIG Planer and Moulder Unimat 23 E ----- 6 spindles (2 x right), reinforced motors, 8,000 rpm, ATS control system The machine will be cleaned and function-tested before delivery. Working width: 20–230 mm Working height: 8–120 mm 1st spindle bottom 5.5 kW (motor renewed) ----- Diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 125–180 mm Rabbetting device incl. tool Hardened table insert in front of the first bottom spindle 2nd spindle right 12.1 kW (motor renewed) ----- Shared motor with left vertical spindle Diameter: 40 mm Speed: 8,000 rpm Tool circle diameter: 112–250 mm Max. tool diameter behind fence: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle left ----- Shared motor with 2nd spindle Diameter: 40 mm Speed: 8,000 rpm Tool circle diameter: 112–200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of the left spindle, incl. lateral spring-loaded roller pressure 4th spindle right 8.3 kW (motor renewed) ----- Diameter: 40 mm Speed: 8,000 rpm Tool circle diameter: 112–250 mm Max. tool diameter behind fence: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 5th spindle top 7.5 kW ----- Diameter: 40 mm Speed: 8,000 rpm Tool circle diameter: 112–200 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Divided pressure shoe in front of top spindle, adjustable to the tool circle and can be swung away from the tool, spring-loaded. 6th spindle bottom 4.0 kW ----- Diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 112–250 mm Max. profiling depth: 15 mm Axial adjustment: 45 mm Spindles general ----- All moulder spindles with high concentricity. Lubrication points for axial spindle movement. Ijdpfjxz Hh Uex Aahstr Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5–24 m/min Infeed roller in front of first lower tool, pneumatically controlled high/low, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Axial adjustment of feed rollers relative to left spindle: 35 mm Machine electrics ----- Operating voltage: 440 V (voltage range 380–420 V), 50 Hz. Machine frame, tables and fences ----- Jointing table 2.0 m long (incl. straightening fence) Manual Waxilit pump for table resin removal One driven rubber roller (spring-mounted in outfeed table) Two driven rollers in machine table, hardened Machine operation ----- Pressure shoe in front of top spindle with mechanical digital display Outfeed behind the top spindle with mechanical digital display ATS/system, automatic 2-axis positioning for spindles no. 3 and 5 Min. working height 12 mm Electric height adjustment of top spindles and feed Centralized lubrication points on front of machine Electronic digital displays: Spindle 3 and 5 axial, spindle 6 radial, spindle 4 axial and radial Safety and Noise Protection ----- Full safety enclosure Easy high...

Kondisi: baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, diameter spindel: 40 mm, lebar kerja: 230 mm, kecepatan pemakanan sumbu X: 5 m/menit, laju pemakanan gandar Y: 36 m/menit, lebar perataan: 20 mm, jenis penyesuaian ketinggian: listrik, tinggi penyerutan: 160 mm, tinggi kerja: 8 mm, Perlengkapan: kabin, rem mesin, de Isdpev A Rpcofx Aahotr

Kondisi: sangat baik (bekas), Four-sided planer SCM Compact XL Isdpfolat Hdjx Aahjtr - Planing width: 23 cm - Planing height: 13 cm - Electric adjustment of top head and feed rollers - All spindles adjustable vertically and horizontally - Bottom spindle 4 kW, right and left each with 7.5 kW motor, top 5.5 kW, universal spindle 5.5 kW Machine in very good condition

Kondisi: sangat baik (bekas), Mesin serut empat sisi WEINIG Unimat 23 E Lebar maksimal penyerutan 230 mm, Tinggi maksimal penyerutan 130 mm, 5 spindle, Pengaturan manual dimensi penyerutan, Konfigurasi spindle: bawah 7,5 kW; kiri dan kanan 11 kW; atas 11 kW; bawah 7,5 kW, Motor dengan rem, Diameter spindle 40 mm, Semua spindle dapat diatur penuh, Mesin dilengkapi 4 rol penarik di meja, cocok untuk kayu basah, Feed melalui poros kardus dengan pengaturan kecepatan variabel Mesin ditawarkan beserta kepala potong yang terlihat pada spindle, Itjdpfx Aajxvc Uaeher Poros kardus tidak aus, meja tidak baret, operasi halus tanpa getaran, Serut sangat kokoh, kondisi asli, berat sekitar 5 ton. Kondisi sangat bagus, semua berfungsi dengan baik.

Kondisi: bekas, Hobel dan kehlautomat Weinig Unimat 23E untuk penyerutan dan pemprofilan empat sisi kayu dengan meja alur untuk benda kerja pendek dan melengkung, serta spindle bergerak dan meja jointer panjang. Lebar kerja: 230 mm; Tinggi kerja: 160 mm; Spindle: 6; Spindle 1: Bawah / 5,5 kW / 50 mm; Spindle 2: Kanan / 11 kW / 50 mm; Spindle 3: Kiri / 11 kW / 50 mm; Spindle 4: Atas / 5,5 kW / 50 mm; Spindle 5: Atas / 5,5 kW / 50 mm; Spindle 6: Bawah / 5,5 kW / 50 mm; Panjang meja jointer: 2.500 mm; Pengumpan: 5,5 kW; Gerak aksial spindle vertikal: 80 mm; Gerak aksial spindle horizontal: 45 mm; Paket untuk potongan pendek: Ya; Meja alur: Ya; Pisau meja alur: Termasuk; Kontrol: Spindle bergerak. Iedjv Ec Ntepfx Aahjtr

Kondisi: siap digunakan (bekas), de-technical-characteristics-quadra-es205-v04 Itsdpfxeundhfs Aahsr

Tahun pembuatan: 1997, Kondisi: sangat baik (bekas), Maximum workpiece width: 23 cm Maximum workpiece height: 18 cm 1 lower horizontal spindle 2 right vertical spindle 3 left vertical spindle 4 upper horizontal spindle Itjdpsk Dxraefx Aaher Heads adjustable up/down, right/left Spindle diameter: 40 mm Hydraulic lateral feed on the infeed table

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), de2hu-it-lt-lv-nb-nl-pl-001 Ijdpfsu Damdsx Aahjtr

Kondisi: sangat baik (bekas), 7382 TECHNICAL DATA Tenoning carriage: - Electrically driven carriage feed with stepless speed adjustment - Carriage adjustable at an angle - Feed motor: 0.46 kW - Table size (L/W): 700x450 mm, extendable to 1150 mm - Cross fence on carriage – cutting length on extendable telescope: 1860 mm - Rotating block in the cross fence - 2 pneumatic clamps Cross-cut saw: - Max blade diameter: 380 mm - Max cutting height: 110 mm - Blade adjustable up/down, forward/backward, and at an angle - Blade guard - Saw motor: 2.2 kW Tenoning spindle: - Pneumatic spindle stroke - Spindle height/stroke regulation via handwheels - Max tool diameter: 320 mm - Spindle diameter: 40 mm - Working spindle height: 220 mm - Spindle lock - Motor: 7.5 kW Profiling spindle: - Pneumatic spindle stroke - Spindle height/stroke regulation via handwheels - Max tool diameter: 200 mm - Working spindle height: 220 mm Iodpfx Aaetx T Dxohstr - Spindle diameter: 54 mm - Spindle lock - Extendable support from table - Motor: 7.5 kW Glazing bead saw: - Max blade diameter: 200 mm - Blade bore diameter: 30 mm - Blade adjustable forward/backward, up/down - Blade guard - Motor: 2.2 kW Feed: - Number of rollers: 8 pcs - Motor approx. 0.55 kW - Roller size: 110x50 mm - 8 feed speeds: 4, 6, 8, 10, 12, 15, 20, 30 m/min - Extraction port diameter: 60 mm, 2x130 mm, 110 mm, 100 mm - Operating pressure: 6-8 bar - Dimensions (L/W/H): 3600x2100x1600 mm, weight approx. 2500 kg ADVANTAGES – For window production – Pneumatic spindle stroke – Carriage with electric feed – Cross-cut saw – Tenoning spindle – Not repainted, used machine, in very good condition Net price: 27,900 PLN Net price: 6,640 EUR (depending on exchange rate of 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Kondisi: bekas, Tahun pembuatan: 2000, Number of spindles: 6 units Working width: 230 mm Planing height: 120 mm Infeed table length: 2500 + 500 mm Feed motor: 3 kW Feed speed: 6–36 m/min 1 WEINIG Planing and Profiling Machine Unimat 23 E 6 spindles (including 2 on the right), powerful motors, EM 11 infeed magazine optional Working width: 20–230 mm Working height: 8–120 mm 1st spindle bottom 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool diameter: 125–180 mm Rabbet facility incl. tool Hardened table insert in front of 1st bottom spindle 2nd spindle right 11.0 kW ----- Shared motor with left vertical spindle Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112–250 mm Max. tool diameter behind fence plane: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle left ----- Shared motor with 2nd spindle Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112–200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe before left spindle, incl. side pressure roller, spring-loaded 4th spindle right 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112–250 mm Max. tool diameter behind fence plane: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 5th spindle top 11.0 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112–200 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Segmented pressure shoe before top spindle, adjustable to tool diameter and can be swung clear of tool, spring-loaded. 6th spindle bottom 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112–250 mm Max. profiling depth: 15 mm Axial adjustment: 45 mm Spindles general ----- All profiling spindles feature high concentricity. Lubrication points for axial spindle adjustment. Vertical spindle length: 170 mm Feed system ----- Motor with mechanical brake, 3 kW Steplessly adjustable mechanical feed 6–36 m/min. Infeed roller before 1st bottom tool pneumatically controlled (high/low) Durofer pointed tooth rollers (Weinig patented) with depth limiter and self-cleaning Axial adjustment of feed rollers in relation to the left spindle: 35 mm Extension of the floating axis in relation to left spindles to 150 mm Machine electrics ----- Operating voltage: 380–400–415 volts, 50 Hz. Machine frame, tables and fences ----- Infeed table 2.5 m long (incl. jointer bar) Aluminum table extension 0.5 m for infeed table, incl. jointer bar extension Manual Waxilit pump for table resin removal One driven rubber roller (spring-mounted in outfeed table) Pressure elements and guides ----- Top pressure rollers, pneumatically actuated Top pressure rollers can be swung away opposite right spindles for easy tool change Machine operation ----- Pressure shoe before top spindle with mechanical digital readout Discharge after top spindle with mechanical digital readout Itsdpewqr Rvefx Aahor ATS/E system, automatic 2-axis positioning for spindle No. 3 and 4 Min. working height: 12 mm Electric height adjustment for top spindles and feed Centralized lubrication points at machine front Safety and sound...