Mesin pembentuk

Weinig Unimat 23E

Kondisi: bekas, Tahun pembuatan: 2000, Four-side Planer and Moulder Weinig Unimat 23E for planing and profiling timber on all four sides, featuring a movable spindle for automatic adjustment and a grooved bed (optionally available without a grooved bed) for short and curved workpieces, as well as a long straightening table. Included: Set of grooved bed cutters Optional: Conversion to a conventional smooth table available on request. Spindles: 5 Gsdpfx Adswztw Setett Spindle 1: Bottom / 40 mm / 5.5 kW Spindle 2: Right / 40 mm / 7.5 kW Spindle 3: Left / 40 mm / Shared motor with spindle 2 Spindle 4: Top / 40 mm / 7.5 kW Spindle 5: Bottom / 40 mm / 5.5 kW Working width: 230 mm Working height: 160 mm

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 255 mm, tinggi penyerutan: 160 mm, diameter spindel: 40 mm, lebar perataan: 255 mm, tinggi kerja: 160 mm, daya motor pengumpan: 3.000 W, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 6.000 rpm, jenis penyesuaian ketinggian: listrik, diameter poros mesin serut: 40 mm, jenis arus masuk: tiga fasa, jumlah spindel: 5, frekuensi input: 50 Hz, Perlengkapan: kabin, rem mesin, Weinig Unimat 23 E with 5 spindles, working width: 255 mm, working height: 160 mm, spindle diameter: 40 mm, feed: 3 kW / 6 – 36 m/min, spindle arrangement: 1-bottom (5.5 kW), 2-right (5.5 kW), 3-left (7.5 kW), 4-top (5.5 kW), 5-bottom (4.0 kW). One powered roller in the table at the outfeed. Gtedpfx Aoxg Sa Hsdtet

Kondisi: bekas, Tahun pembuatan: 1999, Vierseitenhobel Gtodpfxjwnh Sqs Adtot

Kondisi: bekas, Number of spindles: 6 units Working width: 230 mm Planing height: 120 mm Jointing table length: 2000 mm Feed motor: 4 kW Feed speed: 5–24 m/min 1 WEINIG Planer and Moulder Unimat 23 E ----- 6 spindles (2 x right), reinforced motors, 8,000 rpm, ATS control system The machine will be cleaned and function-tested before delivery. Working width: 20–230 mm Working height: 8–120 mm 1st spindle bottom 5.5 kW (motor renewed) ----- Diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 125–180 mm Rabbetting device incl. tool Hardened table insert in front of the first bottom spindle 2nd spindle right 12.1 kW (motor renewed) ----- Shared motor with left vertical spindle Diameter: 40 mm Speed: 8,000 rpm Tool circle diameter: 112–250 mm Max. tool diameter behind fence: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle left ----- Gjdpfexz Hh Usx Adtett Shared motor with 2nd spindle Diameter: 40 mm Speed: 8,000 rpm Tool circle diameter: 112–200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of the left spindle, incl. lateral spring-loaded roller pressure 4th spindle right 8.3 kW (motor renewed) ----- Diameter: 40 mm Speed: 8,000 rpm Tool circle diameter: 112–250 mm Max. tool diameter behind fence: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 5th spindle top 7.5 kW ----- Diameter: 40 mm Speed: 8,000 rpm Tool circle diameter: 112–200 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Divided pressure shoe in front of top spindle, adjustable to the tool circle and can be swung away from the tool, spring-loaded. 6th spindle bottom 4.0 kW ----- Diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 112–250 mm Max. profiling depth: 15 mm Axial adjustment: 45 mm Spindles general ----- All moulder spindles with high concentricity. Lubrication points for axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5–24 m/min Infeed roller in front of first lower tool, pneumatically controlled high/low, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Axial adjustment of feed rollers relative to left spindle: 35 mm Machine electrics ----- Operating voltage: 440 V (voltage range 380–420 V), 50 Hz. Machine frame, tables and fences ----- Jointing table 2.0 m long (incl. straightening fence) Manual Waxilit pump for table resin removal One driven rubber roller (spring-mounted in outfeed table) Two driven rollers in machine table, hardened Machine operation ----- Pressure shoe in front of top spindle with mechanical digital display Outfeed behind the top spindle with mechanical digital display ATS/system, automatic 2-axis positioning for spindles no. 3 and 5 Min. working height 12 mm Electric height adjustment of top spindles and feed Centralized lubrication points on front of machine Electronic digital displays: Spindle 3 and 5 axial, spindle 6 radial, spindle 4 axial and radial Safety and Noise Protection ----- Full safety enclosure Easy high...

Kondisi: baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, diameter spindel: 40 mm, lebar kerja: 230 mm, kecepatan pemakanan sumbu X: 5 m/menit, laju pemakanan gandar Y: 36 m/menit, lebar perataan: 20 mm, jenis penyesuaian ketinggian: listrik, tinggi penyerutan: 160 mm, tinggi kerja: 8 mm, Perlengkapan: kabin, rem mesin, de Gjdpfx Adjv A Rpcetott

Kondisi: sangat baik (bekas), Mesin serut empat sisi WEINIG Unimat 23 E Lebar maksimal penyerutan 230 mm, Tinggi maksimal penyerutan 130 mm, 5 spindle, Pengaturan manual dimensi penyerutan, Konfigurasi spindle: bawah 7,5 kW; kiri dan kanan 11 kW; atas 11 kW; bawah 7,5 kW, Motor dengan rem, Diameter spindle 40 mm, Semua spindle dapat diatur penuh, Mesin dilengkapi 4 rol penarik di meja, cocok untuk kayu basah, Gtjdpfxsxvc Uae Adtjt Feed melalui poros kardus dengan pengaturan kecepatan variabel Mesin ditawarkan beserta kepala potong yang terlihat pada spindle, Poros kardus tidak aus, meja tidak baret, operasi halus tanpa getaran, Serut sangat kokoh, kondisi asli, berat sekitar 5 ton. Kondisi sangat bagus, semua berfungsi dengan baik.

Kondisi: bekas, Hobel dan kehlautomat Weinig Unimat 23E untuk penyerutan dan pemprofilan empat sisi kayu dengan meja alur untuk benda kerja pendek dan melengkung, serta spindle bergerak dan meja jointer panjang. Lebar kerja: 230 mm; Tinggi kerja: 160 mm; Spindle: 6; Spindle 1: Bawah / 5,5 kW / 50 mm; Spindle 2: Kanan / 11 kW / 50 mm; Spindle 3: Kiri / 11 kW / 50 mm; Spindle 4: Atas / 5,5 kW / 50 mm; Spindle 5: Atas / 5,5 kW / 50 mm; Spindle 6: Bawah / 5,5 kW / 50 mm; Panjang meja jointer: 2.500 mm; Pengumpan: 5,5 kW; Gerak aksial spindle vertikal: 80 mm; Gerak aksial spindle horizontal: 45 mm; Paket untuk potongan pendek: Ya; Meja alur: Ya; Pisau meja alur: Termasuk; Kontrol: Spindle bergerak. Gjdpfxov Ec Nts Adtstt

Tahun pembuatan: 1997, Kondisi: sangat baik (bekas), Maximum workpiece width: 23 cm Maximum workpiece height: 18 cm 1 lower horizontal spindle 2 right vertical spindle Gtsdpjk Dxraofx Adtjt 3 left vertical spindle 4 upper horizontal spindle Heads adjustable up/down, right/left Spindle diameter: 40 mm Hydraulic lateral feed on the infeed table

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), de2hu-it-lt-lv-nb-nl-pl-001 Gtjdpfx Adju Damdstet

Kondisi: bekas, Tahun pembuatan: 2000, Number of spindles: 6 units Working width: 230 mm Planing height: 120 mm Infeed table length: 2500 + 500 mm Feed motor: 3 kW Feed speed: 6–36 m/min 1 WEINIG Planing and Profiling Machine Unimat 23 E 6 spindles (including 2 on the right), powerful motors, EM 11 infeed magazine optional Working width: 20–230 mm Working height: 8–120 mm 1st spindle bottom 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Gjdpfewqr Rvjx Adtett Tool diameter: 125–180 mm Rabbet facility incl. tool Hardened table insert in front of 1st bottom spindle 2nd spindle right 11.0 kW ----- Shared motor with left vertical spindle Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112–250 mm Max. tool diameter behind fence plane: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle left ----- Shared motor with 2nd spindle Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112–200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe before left spindle, incl. side pressure roller, spring-loaded 4th spindle right 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112–250 mm Max. tool diameter behind fence plane: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 5th spindle top 11.0 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112–200 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Segmented pressure shoe before top spindle, adjustable to tool diameter and can be swung clear of tool, spring-loaded. 6th spindle bottom 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112–250 mm Max. profiling depth: 15 mm Axial adjustment: 45 mm Spindles general ----- All profiling spindles feature high concentricity. Lubrication points for axial spindle adjustment. Vertical spindle length: 170 mm Feed system ----- Motor with mechanical brake, 3 kW Steplessly adjustable mechanical feed 6–36 m/min. Infeed roller before 1st bottom tool pneumatically controlled (high/low) Durofer pointed tooth rollers (Weinig patented) with depth limiter and self-cleaning Axial adjustment of feed rollers in relation to the left spindle: 35 mm Extension of the floating axis in relation to left spindles to 150 mm Machine electrics ----- Operating voltage: 380–400–415 volts, 50 Hz. Machine frame, tables and fences ----- Infeed table 2.5 m long (incl. jointer bar) Aluminum table extension 0.5 m for infeed table, incl. jointer bar extension Manual Waxilit pump for table resin removal One driven rubber roller (spring-mounted in outfeed table) Pressure elements and guides ----- Top pressure rollers, pneumatically actuated Top pressure rollers can be swung away opposite right spindles for easy tool change Machine operation ----- Pressure shoe before top spindle with mechanical digital readout Discharge after top spindle with mechanical digital readout ATS/E system, automatic 2-axis positioning for spindle No. 3 and 4 Min. working height: 12 mm Electric height adjustment for top spindles and feed Centralized lubrication points at machine front Safety and sound...