WEINIG UNIPLAN planer dua sisi

WEINIG uniplan

Kondisi: diremaj di bengkel (bekas), Working width: 230 mm Working height: 15–120 mm Number of spindles: 2 units Weinig Hydro Planing Machine Type Uniplan 23 ----- Machine fully factory-reconditioned by Weinig in 2024. Description: For double-sided horizontal wood processing with 2 working spindles. Spindle arrangement: horizontal, bottom and top. Both horizontal spindles are equipped with hydraulically tensioned counter-bearings, without axial adjustment. Built-in straight jointer on both spindles with automatic stone advance, remote-controlled with guard closed. Machine with continuous, chainless feed equipped with rubber rollers. Electrical height adjustment of the spindles, displayed via mechanical digital indicator (SIKO). Limit switch to restrict height adjustment. Pneumatic feed roller pressure. Stops and table plates non-adjustable. Machine equipped with steel table plates. Machine with full enclosure and integrated noise and dust protection incl. internal lighting. Electrical configuration in accordance with DIN VDE 0113, electrical equipment for industrial machines EN 60204, IEC 204-1. Other electrical regulations not considered. Machine delivered with operator tools, but without machining tools. The spindles of the Weinig Uniplan run at a speed of 7,200 revolutions per minute. Before use, please check if your tools are suitable for this spindle speed. Please also observe this when ordering new tools. Fpjdpexpn Tzjfx Am Seh Technical Data: Max. working width: 230 mm Min. working height: 15 mm, max.: 120 mm Feed motor: 3 kW (4 hp) Horizontal spindles: each 7.5 kW (7.5 hp) Feed speed, stepless: 6–36 m/min Spindle speed: 7,200 rpm Spindle diameter: 50 mm Tool clamping length: 240 mm Max. tool cutting circle: 163 mm Fixed clamping removal below: 0.5 mm (Technical data according to manufacturer – subject to change!)

Kondisi: baik (bekas), Tahun pembuatan: 1994, 2-sided planer, top and bottom Constant table height (always consistent feed height) Max. planing width: 600 mm Fpedpfxjhuthys Am Soh Max. planing height: 280 mm Cutterheads with strip knives Immediately ready for operation

Kondisi: diremaj di bengkel (bekas), 001 Fjdpexpn Tuofx Am Seph

Kondisi: sangat baik (bekas), WEINIG Uniplan double-sided milling machine Fjdpet Uh Dqjfx Am Ssph

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Dijual mesin pellet bekas OGM 1,5 dengan motor utama 75 kW. Kapasitas untuk kayu sekitar 1 ton/jam. Termasuk banyak suku cadang: - Die cincin baru 6 mm untuk kayu, merek Salmatec (harga dari pabrik €2.700 per unit). - Bearing baru untuk roller, 10 pcs. Fodsx R Suzepfx Am Sjph - Cangkang roller baru, 10 pcs. - Suku cadang lainnya, poros utama, pelat untuk roller.

Kondisi: sangat baik (bekas), Weinig Uniplan Double-Sided Planer Planing width: 220 mm Planing height: 15–120 mm Horizontal spindle motor power: 2 x 5.5 kW Spindle speed: 6,000 rpm Spindle diameter: 50 mm Fpsdpfx Aerxuvqem Sjh Spindles supported on both sides Feed speed: 6–32 m/min Feed motor power: 3 kW

Kondisi: bekas, 01 Fpjdpfxjx An R Ts Am Soh

Kondisi: sangat baik (bekas), Self-loading press for glued wood Orma LS/ECO/CA 30/13 Working length: 3000 mm Working width: 1300 mm Automatic material loading Glue application system Shelves heated by oil up to 130°C Fpodpjv Nhx Uefx Am Seh Top pressing force: 57 t Side pressing force: 9 t Year of manufacture: 2001 CE certificate

Kondisi: bekas, Available: No. 1 and No. 2 Used electrical control cabinet from a Weinig Uniplan, suitable as a source of spare parts or for constructing a new control cabinet with operating panel. Fjdst Snzwspfx Am Sjph

Kondisi: bekas, arbeitsbreite-weinig-uniplan23-de Fpjdot Rmbmopfx Am Sjh

Kondisi: bekas, 3176 Planer and Moulder WEINIG Hydromat 1000 Used, Year of manufacture: 2007 6 spindles: bottom - right - left - top - top - bottom Electronic feed: 6 - 60 m/min Working width: 80 - 150 mm Working height: 23 - 65 mm Lamella finished width: 4 - 15 mm Max. number of lamellae: 16 pieces Lamella lengths: 400 - 4,000 mm 1st spindle horizontal bottom Brake motor 11 kW, 6,000 rpm Spindle diameter: 45 mm Tool diameter: 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6,000 rpm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle vertical left 7.5 kW, 6,000 rpm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of spindle, swiveling, pneumatic roller pressure 4th spindle horizontal top 15 kW, 6,000 rpm, diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable and swiveling, pneumatic 5th spindle horizontal top as saw spindle Brake motor 37 kW, 5,000 rpm Diameter: 45 mm Axial adjustment reduced to 25 mm Tool diameter: 112 - 250 mm Max. saw depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable and swiveling, pneumatic 6th spindle horizontal bottom as saw spindle Brake motor 30 kW, 5,000 rpm Axial adjustment reduced to 25 mm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. saw depth: 35 mm Axial adjustment: 45 mm All moulding spindles with high-performance bearings Electronic feed 7.5 kW Feed roller adjustment relative to left spindle, axial 35 mm Shortened roller spacing relative to right spindles Linear meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 powered rollers over table 1 powered, serrated roller in the table, side pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 powered, serrated rollers in outfeed table 2 powered, serrated rollers in the machine table Fedpfxeu Agh So Am Sjph Pressure beam before and discharge after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electric height adjustment for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex site near South Tyrol, without transport and installation Description and price subject to change Transport and loading by us optionally possible To avoid possible misunderstandings, inspection on site by appointment is possible and recommended Sale is as-is Technical specifications, condition description, year of manufacture, and delivery scope as per manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty is provided for used machines; it is sold as seen Images and videos serve as examples and do not constitute the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipment Delivery terms: ex location