Press membran

Wemhöner KT-MB-28/15-240

Kondisi: sangat baik (bekas), MEMBRANE PRESS For coating MDF-shaped panels with PVC, PP, and PET with VARIOPIN fully automatic substructure system Ndodpfx Asrwxz Rjb Eod Automatic front loading/unloading and preparation table (double tray carriage 1500 x 2800 mm) Max. total pressing force: 2,400 kN Operating pressure: 320 BAR Panel dimensions mm: 1500 x 2800 mm Usable working dimensions mm: 1250 (or 2 x 600) x 2550 Front loading side from 1500 mm (usable width 1250 mm) Separate control cabinet and controls (with electronic programmer) SIEMENS SIMATIC Panel Touch Installed total power approx. 50 KW OPTION "Paternoster" roller magazine Unwinder (roll holder) with coating film cutting system

Kondisi: bekas, nomor mesin/kendaraan: 008018, Tipe tepi yang dipasang: tepi tipis, tepi tebal, kayu solid Sistem lem: EVA, PUR Penghalusan sambungan: ya Ndodpfxewv Dfco Ab Eed Agregat multifungsi: ya Kecepatan maju maksimum: 20 m/menit Ketebalan papan maksimum: 60 mm Unit kerja: 7 unit

Kondisi: bekas, Tahun pembuatan: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on configuration) Edge height: 51/66 mm (depending on configuration) Panel thickness: 6–45/60 mm (depending on configuration) Edge types: roll and strip material Feed speeds: infinitely variable feed from 12–30 m/min (depending on configuration) with adjustable infeed level in the magazine area (max. adjustment range 30 mm) with height-adjustable magazine plate for varying the lower edge overhang with large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm with transport chain including automatic central lubrication with motorized, position-controlled bridge height adjustment with pneumatic locking roller for minimal workpiece spacing with extendable workpiece support (extension 1600 mm) with space-saving, pneumatically controlled sliding covers along the entire machine (variations possible for individual units) with motorized infeed fence with spray oilers for lubrication of all joints and bolts (incl. operating hours counter) with central extraction connection (2x Ø 200 mm) with integrated chip collection box at the end of the machine (with radius scraper unit installed) Controller PPC 231 - Power PC for efficient setup and changeover - 15" SVGA display with touchscreen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard port on board - Windows-like user interface - all information in plain text and/or graphics - swivel and pivoting control panel at eye level - dustproof membrane keyboard with softkeys (pushbuttons) - LED indicator for unit preselection - program list with program names and numbers - extensive program storage - individual selection of units with functions for basic settings of setpoint values, reference points, and tool corrections as well as fixed reference points - setup operations for units and their axis settings centrally and clearly organized via fine adjustment (depending on configuration) Ndjdovvkfdopfx Ab Eod - interval display for minimum workpiece distance - integrated reference control - reference points are controlled in general or program-specific mode - clear and comprehensive acquisition of all operating data - service messages in plain text - diagnostics system - includes integrated synchronous bus system for high accuracy in unit control - individual management for up to ten users, including password protection - online maintenance (optional), data exchange with HOLZ-HER Service - barcode interface (optional) BASE MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the base machine Spray unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled release agent spray unit with release agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12,000 rpm) With two plunge-controlled milling units • 1 unit in counter-rotation • 1 unit in co-rotation Plunge depth 5 mm with static frequency converter 200 Hz, without milling tool with ProLock quick-release tool holder for rapid tool change Tool for 1803 (workpiece height up to 60 mm) Diamond cutter PRO UT 2 pcs (front and rear) incl. safety hoods Ø 100-63 – Ø 30 mm, Z = 3 + 3 + 3, 1x left rotation, 1x right rotation Low-noise cutter with integrated chip guidance DFC technology (Leitz system) Chip removal max.

Kondisi: baru, Tahun pembuatan: 2025, jam operasional: 1 h, Fungsionalitas: berfungsi sepenuhnya, 🔧 Original ISELI Grinding Machine for Chisels and Hand Tools – For Sale We are offering an original ISELI grinding machine, specially designed for the precise sharpening of: • 🔹 Chisels • 🔹 All types of hand tools • 🔹 Ideal for joineries, workshops, and hobbyists This machine represents the highest quality "Made in Switzerland" and is renowned for its durability, user-friendly operation, and precise grinding results. ✅ Technical Condition: Very good / Demonstration model ✅ Manufacturer: ISELI Maschinenfabrik, Switzerland ✅ Key Features: Robust construction, compact design, ideal for daily use over decades 📍 Pickup in 6247 Schötz (Switzerland) or shipping by arrangement possible. 💬 Price on request. Ndodpfxjrm Sy Es Ab Ejd

Kondisi: bekas, Tahun pembuatan: 2008, Used machine Year of manufacture: 2008 Condition: Machine was used in Germany and regularly maintained (last maintenance performed by Homag in 11/2024) Nedpfswx Aaqex Ab Eedd Features and Technical Data: Minimum workpiece thickness: 12 mm Maximum workpiece thickness: 60 mm Minimum workpiece size (L×W): 240 × 55 mm (at 22 mm thickness) / 100 mm (at 60 mm thickness) Minimum edge thickness: 0.3 mm (coil material) / 0.4 mm (strip material) Maximum edge thickness: 3 mm (coil material) / 20 mm (strip material) Feed speed: steplessly adjustable 18–25 m/min (frequency controlled) Type of glue: EVA hot-melt adhesive Glue application (pot / cartridge / nozzle): melting unit with granulate tank Glue volume / cartridge capacity: granulate tank, melting capacity 18–35 kg/h, level-controlled Heating-up time: approx. 8–10 min Edge magazine (slots): 2 coils (automatic coil change) Automatic edge change: yes (automatic via PC22, manual switching possible) Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment End trimming: Kapp unit HL84, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) Flush trimming: via pre-milling unit, pneumatically adjustable Radius trimming: profile milling unit FK13, automatic 8-position tool changer (R = 2 mm) Chamfer / profile trimming: yes, via FK13 pneumatically adjustable Scraper: integrated in multi-finish unit MN21 Buffing: buffing unit in finishing aggregate FA11 Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW Workpiece preheating: available Separating agent spraying device: top / bottom, type 2929 (F.01) Extraction ports: multiple Ø 100 mm (individual extraction per unit) Control system: powerControl PC22 (industrial PC, woodCommander on Win XP embedded) Operating voltage: 400 V, 50 / 60 Hz CE / Standards: CE-compliant according to EC Directive 98/37/EC Dimensions / footprint: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor unit visible in the photos is not included in the scope of delivery! Availability: short notice Location: Lithuania

Kondisi: bekas, Tahun pembuatan: 2019, Edge control, numerical control. Panel height min-max: 6 - 60 mm. PVC/ABS up to 3 mm. Minimum panel length/width: 140/60 mm. Feed speed up to 10 / 25 m/min, continuous. Working height electronically adjustable by CNC. Side roller track with return rollers for panel support. Rectifying unit with 2 motors. Coil holder plate. Glue unit for EVA/PUR glue, suitable for cartridge or granulate system. Edge pressure group for straight profiles with electronically adjustable pressure rollers (CNC). End cutting unit with 2 motors. Trimming unit with 2 tilt motors, electronically adjustable by CNC. Corner rounding unit with 4 multifunction motors (corner trimming + rounding), numerically controlled, automatic. Scraper unit with electronic control, CNC. Glue scraper group. Brushing unit. Machine length approx. 6500 mm. Weight approx. 2750 kg. Ndedpfxowwhn Do Ab Eod

Tahun pembuatan: 2005, Kondisi: baik (bekas), nomor mesin/kendaraan: C9 15840, Profilbürstmaschine Tagliabue LB 2 Modell: LB 2 TECHNISCHE DATEN: Baujahr: 2005 Tagliabue Kanten-Schleifmaschine mit 4 oszillierenden Schleifaggregaten. Zwei vertikale Walzen und zwei innenliegende Querwalzen für das Querbürsten. Ndedpfxsg Rn Iae Ab Eed

Kondisi: bekas, Tahun pembuatan: 2016, Gerak dorong 2800 mm, lebar potong 1250 mm, pagar paralel terkontrol, kappa 400 X, agregat gergaji dapat dimiringkan 45°, diameter mata gergaji: 250 - 400 mm, tinggi potong maksimal 133 mm, penyesuaian ketinggian elektrik, motor 5,5 kW, 3 kecepatan putar 3500/4500/7500 rpm. Kontrol layar X Motion (fungsi sentuh) setinggi mata. Fitur tambahan: Schifter Schnitt, sistem quick change easy-lock untuk mata gergaji utama. Lokasi penimbunan: Pemasok. Ndsdsxta Dmepfx Ab Eed

Tahun pembuatan: 2018, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, WEMHÖNER VARIOPRESS Basic 1000 S Vacuum Membrane Press Technical Data: - Heating plate dimensions (mm): 2850 x 1550 - Electric heating plate configuration: Aluminum heating plate on top - Total pressing force (kN): 2400 - Maximum chamber pressure (bar): 6 - Maximum operating temperature: 180°C - Maximum batch or workpiece size (mm): approx. 2460 x 1180 - Thermoplastic film as roll material: film width approx. 1430 mm - Film thickness (mm): approx. 0.25 - 1 Ndedpfev Np H Hex Ab Esd - Pressure chamber height (mm): up to max. 180 Connections: - Installed power (kW): approx. 46 - Required air pressure (bar): approx. 8

Kondisi: baik (bekas), Tahun pembuatan: 2011, Internal flange dimensions: 2340 x 1340 mm Maximum panel dimensions (20 mm thickness): 2340 x 1240 mm Working chamber height: 60 mm Total thrust: 300 t Maximum working specific pressure: 5 kg/cm² Pressing cylinders: No. 6, diameter 140 mm, stroke 250 mm Lower movable platen (closing movement from bottom to top) Opening between press platens: 230 mm Loading side: 1400 mm PVC roll unwinder Nodpfxstwba Ss Ab Ejdd Double loading table