Mesin pengukur koordinat

Wenzel LH 65

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: LH-M064774, rentang pengukuran sumbu X: 650 mm, rentang pengukuran sumbu Y: 750 mm, rentang pengukuran sumbu Z: 500 mm, berat benda kerja (maks.): 270 kg, Offered for sale due to new acquisition (we require a larger model). Wenzel LH65 3D Coordinate Measuring Machine (CMM) with accessories Latest measuring software system Quartis R2022-2 Used but in very good condition Fixed price: €22,500 net, ex works 95369 Untersteinach, collection only Payment in advance or upon collection. The measuring machine will remain in use until early April 2026; demonstration is possible until then. Technical Data Gujdpsyxv Eaefx Aabsa - Model: LH 65/CNC - Year of manufacture: 2005 - Commissioned: 04/2006 - Serial number: LH-M064774 - Weight: 1270 kg - Maximum workpiece weight: 500 kg - Regularly serviced and calibrated - Has always been operated in a climate-controlled metrology room - Monthly operating time: approx. 1 week Measuring Range and Accuracy - Measuring range (X/Y/Z): 650 x 750 x 500 mm - Usable table size: 1450 x 850 mm - Measurement uncertainty according to DIN EN ISO 10360-2 for TP200 probe - Measuring accuracy (MPE E): 2.6/1000+(L/300) - Temperature range: 20°C +/- 2K, 1.0K/h, 1.0K/m - Operating temperature: 15°C – 30°C - Relative humidity: 10% - 70% - Supply air pressure: 6-10 bar, pre-filtered, quality per ISO 8573-1, class 4 or better Equipment - CNC control - Renishaw probe system - Granite base plate with minor repairs (see photo) - Horizontal air bearings (LH system) on measuring table - Active pneumatic damping (not elastomer vibration damping) - PC system & software - Upgrade to WM Quartis R2022-2 (new price €23,740.50) - 4-port PCle interface card - USB keyboard, German layout, black - 24" LED full HD monitor (1080p) – 61 cm - PC front panel: Si-Esprimo P757 Accessories - Ceramic reference sphere, 25 mm diameter, M10 mounting - Small stylus kit M2 - PH10T motorized indexing head - PHC 10-3 Plus control unit for indexing head - 1x TP200 - 1x SF module - 1x SCR 200 - Various M2 styli (one each: 0.5mm, 1.0mm, 2.0mm, 4.0mm) - M2 rotary-swivel joint - M2 stylus holder, length 19 mm - 1 hex key and 2 pin wrenches - Stylus holder in case - PC and controller cart with desk combination - HAT-400 hand control unit - Documentation All information has been compiled to the best of our knowledge and belief. Subject to change, error and prior sale. No warranty is provided.

Kondisi: bekas, Tahun pembuatan: 2019, de-hu-1 Gsdpfx Aasyw Titobjua

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, jumlah sumbu: 3, This 3-axis Wenzel LH 65 was manufactured in 2020. It features CNC control with active damping, a PH6M/TP200 probing head, and a base plate measuring 600 x 500 x 25 mm. The scope of delivery includes an 18-piece M2 stylus insert set, quick-change magazines, and a microfilter for solid particle filtration. If you are looking for high-precision measurement capabilities, consider the Wenzel LH 65 CMM machine we are offering for sale. Contact us for further details. Guedpfx Aaoylm Hgobea • 3D coordinate measuring machine • Generation: New Generation 2 • Accuracy class: PREMIUM accuracy • Active damping system • CNC control: 3-axis Basic CW • Included software: WM | QUARTIS GEO-L, WM | QUARTIS EMD, WM | QUARTIS IPH, WM | QUARTIS PRC • Probe head: PH6M / TP200 probe head Additional equipment • 18-piece M2 stylus set with case • Reference sphere • 2x SCR200 quick-change magazines • Base/mounting plate 600 x 500 x 25 mm • 5x TP200 SF modules • Microfilter for solid particle filtration

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Travel path X/Y/Z: 600mm/750mm/500mm, max. length measurement error: 3 + L/350, max. single point error: 3, control: Pantec Eagle Pro/3. Includes PH10M Plus probe head, PHC-2, TP200 sensor, 20-piece stylus set, calibration sphere, industrial PC, Inca 3D Premium measurement software with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. On-site inspection possible. Guodpfx Asw H Auwjabja

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 1.200 mm, rentang pengukuran sumbu Y: 2.000 mm, rentang pengukuran sumbu Z: 1.000 mm, Measurement ranges X-axis: 1200 mm Y-axis: 2000 mm Z-axis: 1000 mm Length measurement uncertainty ISO 10360 E = [2.6 + 4L/1000]µm CNC control: Renishaw UCC S5 Handbox: Renishaw MCU-5, optionally wireless MCU-5W Temperature sensors: Renishaw Probe system: Renishaw REVO-2 5-axis scanning system Probe changer: Renishaw (Price for REVO approx. €80,000 new) Gjdpfx Aasdv I Aboboua Software: Inspect3D Inca V6, new license (all languages) Original year of manufacture: 2014, modernized in 2017 and 2025 Trade-in against other CMMs possible

Tahun pembuatan: 2000, Kondisi: bekas, en-WENZEL LH 108 CNC – Controlled Vertical 3D Measuring Machine x-axis travel: 1000 mm y-axis travel: 1600 mm z-axis travel: 800 mm Control: WENZEL WPC 2040/FW31.351 Total power requirement: kW (not specified) Machine weight: approx. 5,500 kg Space requirement: (dimensions not specified) Model: LH 108 CNC Year of manufacture: 2000, continuously serviced and calibrated by the manufacturer _____ Y-axis as a longitudinally movable measuring gantry: 1,600 mm X-axis as crosswise measuring head carriage: 1,000 mm Z-axis as vertical measuring quill: approx. 800 mm Max. workpiece/table load: approx. 2,250 kg Clearance under measuring gantry: approx. 900/1000 mm Table size (overall): approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Table top thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special features / Accessories: • Measuring table, traverse, and quill made of dark natural hard stone; table features 6 x 9 threaded holes for securing workpieces/fixtures Guedpfst Hw Nyox Aaboa • All axes are air-bearing, providing smooth, virtually wear-free operation, fitted with incremental linear scales with 0.0005 mm resolution • WENZEL CNC control type WPC 2040 / FW 31.351 installed in the work table (control unit replaced approx. 3 years ago) • WENZEL measuring software type METROSOFT QUARTIS R 12 SP1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° increments) with measuring probe model PH 10 M plus and probe TP 20 with various accessories • RENISHAW Probe Head Controller unit type PHC 10 C-3 plus, also integrated in the work table • Automatic probe changer possible, 6-position probe magazine model MCR 20 mounted on the table • Mobile hand control panel with progressive joystick for manual control of all three axes with continuously adjustable travel speeds • Calibration sphere for mounting on table, work table, various clamping devices, etc. Condition: Very good – generally available for inspection under power in stock, demonstration-ready; disassembled by a CMM specialist at previous owner's site and reassembled here. Delivery: Ex-stock – as seen and inspected Payment: Net – payment upon receipt of invoice.

Tahun pembuatan: 1992, Kondisi: bekas, Grinding height: 50 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Total power requirement: 85 kW Machine weight approx.: 9,500 kg D I S K U S CNC-controlled vertical double-sided surface grinding machine with rotary workpiece feed and IONIC measuring control system. Model: DDS 600 III PRM - CNC Year of manufacture: 1992 # 7924 _____ Grinding wheel diameter: each 600 x 150 x 75 mm (height) Workpiece data: Grinding height approx.: 1.5 – 50 mm Grinding width approx.: 20 – 120 mm Vertical quill adjustment, each approx.: 150 mm Grinding wheel infeed via CNC: 0.0001 mm Workpiece transport device feed, continuously variable: 40 – 235 mm/sec Grinding wheel speed each (30 m/s): 191 – 955 rpm Grinding spindle drive, infinitely variable: each 37 kW Total drive approx.: 85 kW / 380 V / 50 Hz Weight approx.: 9,500 kg Accessories / Special equipment • SIEMENS CNC control SINUMERIK 810 G with monitor, for 4 axes (infeed top and bottom, dresser, and workpiece rotary table), direct input of all grinding data, and in combination with: Gsdpst Hw Nasfx Aabjua • IONIC measuring system no. 17A with 2 probes for scanning the workpieces after the grinding process, triggers appropriate infeed of the grinding wheels, ongoing measurement results displayed on monitor for statistics, workpiece counting, etc. • Digital display of power (amperes) for drive motors and grinding wheel speed • Portal design for higher stability and precise grinding results • Rotary workpiece transport with continuously variable speed as fourth axis • Position monitoring device for supervising the position height of the lower grinding wheel • 2 adjustable workpiece hold-down devices at infeed and outfeed, height monitoring, simple raw part stacking device, and finished parts removal by conveyor belt • Angled, side-mounted dressing device with programmable dressing cycle, CNC axis integrated into the control unit, with safety cut-off • Large separate control cabinet, automatic central lubrication, sophisticated pneumatic system • Large PROMATEC (F) coolant system with filtration and magnetic separator • Various grinding wheels, flanges, table segments, transport discs, large fume extraction unit, etc. This machine is particularly suitable for simultaneous, perfectly parallel grinding of workpieces in large batches such as stamped parts, piston rings, hydraulic components, etc. Condition: good to very good – ready for demonstration shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice This is a very rare opportunity in terms of both condition and price. Should you require another grinding machine – particularly from DISKUS – please send us your inquiry.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, 1 Gsdpjyzar Nofx Aabeua

Tahun pembuatan: 2023, Kondisi: baru, Tank & Environmental Protection Wozniack – Certified Specialist Company under the German Water Resources Act (WHG) Dear Sir or Madam, We are offering a 10,000-liter double-walled storage tank for the storage of heating oil, manufactured to EN 12285-2 standard. Nominal capacity: 10 m³ (new), EN 12285-2 compliant Paint finish: RAL 7035 Material: Steel-in-steel, material grade S235JRG2 Documentation: Manufacturer’s certificate / nameplate Included accessories: - 1 dipstick - 1 vent nozzle - 1 fill nozzle - 1 new overfill prevention device Gedpjk Dpv Asfx Aabeua - 1 new leak detection unit - 1 ladder - 1 suction line Tank dimensions: approx. 5,300 mm (length) Diameter: approx. 1,600 mm Weight: approx. 2,000 kg Storage: Above-ground Delivery time: September Best regards from Warstein Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Kondisi: baru, The chip separator has a diameter of 900 mm and can be supplied with sound insulation upon request. Drive: Electric motor, 0.75 kW. Guedpsvuku Nefx Aabsa