ZSK 133 – ekstruder sekrup ganda

Werner &Pfleiderer ZSK 133

Kondisi: sangat baik (bekas), DOUBLE-SIDED FEEDING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 horizontal upper support beam (with carriage gliding on it) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for feeding stacks of panels to the feeding station Hfodpfjfi Tg Hsx Ahneh External motorized roller conveyor (receiving panels from the feeding station) Separate electrical control panel Perimeter safety fencing with safety mats Operating capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Minimum panel dimensions mm 250 x 320 (approx.) Maximum panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Tahun pembuatan: 1980, Kondisi: bekas, Pressure 80 t Reach - mm Stroke 50 mm Table area 875 x 695 mm Ram area 350 x 355 mm Ram adjustment 71 mm Strokes per minute 30 - 90 spm Frame opening 450 mm Machine weight approx. 6.2 t Space requirements approx. 2.0 x 2.1 x 3.2 m Installation height (stroke bottom, ram adjustment top) 480 mm Hfedpfx Asdlcy Hehnsh Additional information: - The machine is currently undergoing partial overhaul - The machine has been newly equipped with the following components: * Separate free-standing control cabinet with touchscreen incl. wiring * New paintwork of individual components in disassembled state After the partial overhaul, the machine will be safe for manual loading operations with open tools. Before delivery, a current accident prevention inspection (UVV) and brake time measurement will be carried out.

Kondisi: seperti baru (mesin pameran), 1 Hfsdpsdbny Eofx Ahneh

Tahun pembuatan: 2002, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Ekstruder Dwi Sekrup Ref.-No.: DE27695 Produsen: Leistritz Hfsdpex Dip Tofx Ahnjh Tipe: ZSE 40 HP Tahun Pembuatan: 2002 Diameter Sekrup: 2 x Ø 40,0 mm L/D: 40D Daya Penggerak: 70 kW Detail: co-rotating, sekrup dan silinder tersegmentasi, 1 x segmen untuk penyuplai samping Opsi: granulasi, dosing, sidefeeder Penawaran ini tidak sesuai dengan kebutuhan Anda? Silakan kunjungi situs web kami Plama Engineering atau kirimkan permintaan detail Anda; kami memiliki solusi yang sesuai untuk hampir setiap anggaran.

Kondisi: bekas, Taper of milling spindle / Collet diameter / Speed range / rpm Hodpfehprk Hsx Ahnsfh For data, see images!

Kondisi: baik (bekas), Tahun pembuatan: 2006, nomor mesin/kendaraan: Serien Nr. 64019447, Used Coperion Werner & Pfleiderer ZSK 34 MvC twin-screw extruder available for sale. The extruder was previously used for powder coatings. Hfsdpfx Ahsvcyk Njnjh

Kondisi: bekas, Radial drilling machine with platen table WEBO Type HRH 100 / 3000 Machine No. 10009555/7 -- 1110185 -- 6046 Year of manufacture: 1979 Drilling capacity Ø 100 mm in ST 60 with 0.5 mm/rev feed Nominal arm reach: 3000 mm Maximum arm reach: max. 3100 mm Spindle taper: Morse Taper 6 Spindle speed: 22.4 - 1600 rpm, 36 steps Feed: 0.05 - 2.5 mm/rev, 18 steps Distance spindle to base plate: 970 - 2335 mm Quill stroke: 325 mm Boom swivel range: 360° Traversable on bed, bed length: 7500 mm Clamping area (platen table): 8000 x 2100 mm - Electric central clamping - Drilling unit on the machine bed can be moved longitudinally by electric motor - Platen table consists of 2 clamping plates with 7x T-slot, (length 4000 x width 2100 x plate thickness 360 mm) Space requirement L x W x H: 8000 x 4550 x 4300 mm Maximum height: 4300 mm Transport height (bed with drilling machine): approx. 3150 mm Transport weight (bed with drilling machine): approx. 20 tons Transport dimensions platen table L x W x H: 4000 x 2100 x 900 mm (2 plates stacked) Transport weight platen table: approx. 14 tons Hjdpfx Aefbt Hujhnofh Good condition

Kondisi: sangat baik (bekas), Double-sided stand-alone machine (or 1st and/or 2nd machine in a processing line) Edge thickness for rolls (min/max) mm: 0.4 / 3 Edge thickness for strip veneer (max) mm: 1.3 Panel thickness (min/max) mm: 10 / 45 Working width (min/max) mm: approx. 244 / 2300 Control/Software: ICOS Open Feed speed (m/min): 8 - 40 No transfer bar (Master & Slave systems) Safety and noise protection enclosure Retractable stops, spacing (mm): 270 FORMAT PROCESSING (for each side): Jointing unit 75.30 (6.6 kW x 2) EDGE BANDING SECTION (for each side): Gluing station (P.U.R. adhesive + pre-melter) 04.1570 + 283.205 Edge magazine for rolls (compartment no. 6) End trimming unit 08.42 (0.2 kW x 2) 40 m/min Hodpfx Ahjfi Tkvsnofh Milling unit 08.055 (0.66 kW x 2) 0°–30° Multifunction unit (radius milling and contour trimming) MFA 08.342 (0.66 kW x 2) max. 25 m/min Contour milling unit (copier) 08.465 (0.18 kW x 4) max. 20 m/min Buffing unit 08.617-2 (0.18 kW x 2) Free position

Tahun pembuatan: 2007, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, 5 x 148 m³ Aluminium silo (plastic granulate silo) Technical data / Dimensions Available quantity: 5 Year of manufacture: 2007 Volume: approx. 148,000 litres Type: Silo Condition: used Suitable for food: no Design: vertical Internal diameter: approx. 3,500 mm Cylindrical height: approx. 14,900 mm Total height: approx. 17,500 mm Weight: approx. 3,500 kg Specific gravity of medium: 0.6 t/m³ Hedpfexqr Ekex Ahnefh Operating pressure: non-pressurised Ground clearance: approx. 770 mm Material / Specifications Inner shell material: Aluminium Notes: Material grade: AlMg3 / AlMgSi3 Support type: Base ring/support ring Top bottom type: Conical top Slope: approx. 15 % Bottom type: Cone Cone angle: 90 degrees Top: 1 x roof edge railing, height: 1,200 mm 1 x transition walkway with railing 2 x crane lugs 1 x manhole DN 600 with mounted vent nozzle 1 x connection flange for level measurement 1 x nozzle for full indicator 1 x flange DN 100 (filling) Shell: 1 x operating room door (approx. 1,800 x 850 mm) 1 x cable protection conduit 1 x filling line DN 100, terminating in TW connection 1 x weld-in adapter for empty indicator Bottom: The silos terminate at the bottom in a 90° cone with DN 200 flange and emergency shut-off slide, as well as a mounted suction box.

Tahun pembuatan: 2023, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, 3 UNIT JWELL - 65 EXTRUDER SEKRUP KONIK GANDA Hodey Sxizepfx Ahnofh