Pusat penggilingan balik CNC

WFL M120 MILLTURN 5000mm

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, Area kerja Pjdpfxjydi Hyo Al Iogk Kontrol: Fanuc 31i-B5 Perpindahan sumbu X: 700 mm Perpindahan sumbu Y: 400 mm Perpindahan sumbu Z: 400 mm Luas penjepitan: 850 x 410 mm Beban meja (maks.): 400 kg Gerak cepat sumbu X/Y/Z: 54 m/menit Akurasi posisi: 0,006 mm Akurasi pengulangan: 0,004 mm Spindel Teknologi: drive langsung Putaran maksimum: 24.000 rpm Daya maksimum: 26 kW Torsi maksimum: 35 Nm Jenis holder alat: BBT 30 Penukar alat Magazin alat: 21 posisi Waktu pergantian alat: 1,3 s Perlengkapan Pasokan pendingin: IKZ 20 Bar Pembuangan serbuk (chip): konveyor serbuk

Kondisi: baik (bekas), Tahun pembuatan: 2000, lebar meja: 1.000 mm, panjang meja: 1.800 mm, lebar pelat tuas: 600 mm, panjang total: 25.000 mm, lebar total: 27.000 mm, tinggi total: 47.000 mm, berat keseluruhan: 43.000 kg, langkah bantalan cetakan: 200 mm, Siemens Simatic OP 27 control system Sick photoelectric sensor Pgsdpfx Aetiwgiel Isk Separate Rittal control cabinet Side walkways Floor-level installation

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, jam operasional: 2.000 h, Fungsionalitas: berfungsi sepenuhnya, tinggi pembubutan: 3.000 mm, berat benda kerja (maks.): 30.000 kg, diameter pembubutan: 3.500 mm, daya: 100 kW (135,96 hp),

Kondisi: bekas, Tahun pembuatan: 1999, x-travel 12,000 mm y-travel 3,600 mm z-travel 1,500 mm Spindle speeds 3,000 rpm Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3,600 mm Cross (Z-axis): 1,500 mm Longitudinal (X-axis): 12,000 mm Guideway length: 14,700 mm Guideway width: 1,400 mm Lowest milling position of spindle nose measured from floor (head horizontal): 855 mm Low column version 870x900x2,625 mm: 3,000 kg High column version 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Spindle taper: ISO 50 / DIN 69871-A Speeds: 11.7 : 231 : 3,000 rpm Pgedpfjxwdygsx Al Iek Feed range: 2–2,500 mm/min Rapid traverse X-axis: 12,000 mm/min Z/Y-axis: 15,000 mm/min Feed motor output X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Precision Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Compressed air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyor are not included in the scope of delivery. However, we can offer both used and new clamping plates and chip conveyors upon request.

Kondisi: baik (bekas), Tahun pembuatan: 2014, Spindle speeds: 170 - 18,000 rpm Machine weight: approx. 7.5 t Required space: approx. 5.00 x 4.00 x 2.20 m --> Control retrofit (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical specifications Grinding diameter: 20 - 300 mm Pgjdpfsw Intaox Al Iok Swing diameter: 350 (500) mm Workpiece length: 300 (1300) mm Recommended maximum grinding depth: up to 300 mm --> Grinding table travel Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min --> Grinding stroke speed: 0 - 9.99 m/min --> Infeed speed: 0 - 99.99 m/min --> Incremental infeed value (reversal): 0 - 0.999 mm --> Grinding table travel X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min / revolution --> Grinding stroke speed: 0 - 5 m/min / revolution --> Infeed speed: 0 - 99.99 m/min / revolution --> Incremental infeed value (reversal): 0 - 0.999 mm / Ø --> Workpiece spindle head swiveling range: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36”) --> U-axis travel (total): 300 mm --> Resolution: 0.001 mm / Ø --> Traverse speed: 5 m/min --> Center height above work table: 200 (300) mm --> Center height above grinding table: 330 (430) mm --> Workpiece spindle bore: 50 (70) mm --> Original year of manufacture: 1988

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Amada HFE M2 220t 4m, 8-Achsen Abkantpresse Baujahr: 2012 Presskraft: 220 Tonnen Max. Biegelänge: 4.280 mm Hub: 200 mm Pjdpfev S U Izex Al Isgk Anfahrgeschwindigkeit: 1 - 100 mm/s Biegeschwindigkeit: 1 - 10 mm/s Rücklaufgeschwindigkeit: 1 - 100 mm/s Ölvolumen: 195 l Motorleistung: Gewicht: 17.450 kg Abmessungen: Maschinenlänge: 5.070 mm Maschinentiefe: 2.075 mm Maschinenhöhe: 3.085 mm Ständerabstand: 3.760 mm Oberwangenbreite: 180 mm Tischhöhe: 960 mm Gesamthöhe offen: 470 mm Ausladung: 420 mm

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), Steel saddle stitcher ST 100.1, year of manufacture 1998 1,223 operating hours. Manual feed unit (expandable to 2) 4 twin feeders Stitching station with lateral trimmer monitoring 2 Hohner 52/8 standard stitching heads 2 Hohner 52/8 loop stitching heads Lateral trimmer monitoring Three-knife trimmer with center cut device Transfer-marking table Psdsq Rw Exopfx Al Isgk Shingle delivery 2 pumps Documentation

Kondisi: bekas, Tahun pembuatan: 1994, en-GB-001 Podpfx Aol Su Rxsl Iogk

Kondisi: bekas, Tahun pembuatan: 2008, translation Pgsdpfx Alew Rgcfo Ijk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, CNC Turning and Milling Center – DMG GILDEMEISTER – CTX gamma 1250 TC Year of manufacture: 2009, used as a demonstration machine until 2011, in production since 2012 The machine can be inspected under power by appointment. Condition: Very good (high precision), immediately ready for operation. Spindle hours (as of August 1, 2025): 9,580 h The core of the machine is the integrated travelling column with turning-milling spindle and interpolating B-axis. Basic machine data: * Partial hollow clamping device (hydraulic) * C-axis * Upper compound slide with turning/milling spindle as motor spindle, with hydraulic clamping for turning operations, taper: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Disc-type tool magazine * Absolute, direct linear measuring systems on X, Y, and Z1 axes * USB interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3D path control TURN PLUS Pgsdpfx Aljw Hg Nlo Iok Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Distance between centers: 1,510 mm * Max. bar capacity: 65 mm Main drive I: * Drive power (100% / 40% duty cycle): 24 / 34 kW * Speed range: up to 5,000 rpm * C-axis speed: up to 5,000 rpm Turning-milling spindle: * Tool taper: Capto C6 * Spindle speed: up to 12,000 rpm * Drive power (100% / 40% duty cycle): 13.2 / 22 kW Tool magazine: * Number of tools: 36 * Machine footprint approx. (W/D/H): 6,860 x 4,220 x 2,530 mm * Total weight approx.: 18.5 t EQUIPMENT: Well equipped … * No steady rest * Complete documentation available No guarantee as to the completeness or accuracy of the technical data or equipment. Detailed technical specification sheet and equipment information available on request.