Mesin press vulkanisir Wickert WKP 2560/5/2.5

Wickert Maschinenbau GmbH Landau WKP 2560 / 5 / 2,5

Tahun pembuatan: 1993, Kondisi: baik (bekas), Wickert Maschinenbau GmbH Landau vulcanizing press Rcedpfx Ajn Sm A Ssdcoh Year of manufacture: 1993 Machine No.: 2758 Pressing force: 2800 kN Heating plates: 500 x 500 mm Heating: electric Plate gap: 200 mm Control: Siemens S5 OP17 (conversion to S7 possible) Including sliding table, vacuum pump, vacuum chamber, storage tank Good used condition. With CE marking.

Kondisi: baru, Tahun pembuatan: 2019, nomor mesin/kendaraan: DF0303, gaya penekanan: 160 t, panjang meja: 550 mm, lebar meja: 500 mm, tinggi kerja: 700 mm, Hydraulic Vulcanizing Press – Manufacturer: Hidrobrasil – 160 t Heated Press For sale is a hydraulic vulcanizing press from Hidrobrasil with a maximum pressing force of 160 t. The machine features heated platens sized 550 × 500 mm, an open height of 700 mm, a stroke of 400 mm, and is particularly well-suited for vulcanization, laminating, and thermal pressing processes in rubber and plastics processing. ==== Technical Data & Information: Hidrobrasil Vulcanizing Press – Heated Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Heated press / vulcanizing press - Press force: 160 t - Machine weight: approx. 4.2 t - Dimensions (L × W × H): 950 × 2,440 × 2,400 mm ==== Working Area - Open height: 700 mm - Stroke / travel: 400 mm - Table height above floor: 850 mm ==== Table and Ram - Table plate: 700 × 600 mm - Ram plate: 700 × 600 mm ==== Forces - Return force: 16 t ==== Speeds - Approach speed: 10 mm/s - Pressing speed: 10 mm/s - Rapid traverse speed: 10 mm/s - Return speed: 25 mm/s ==== Hydraulic System - Motor power: 15 kW - Oil tank: 300 l - Electric oil cooling: 1.5 kW ==== Heating System - Heating plates: 550 × 500 mm - Electrically heated up to 200 °C - Heating power: approx. 12 kW - Temperature sensors: 2 per heating plate - Temperature accuracy: ± 3 °C within 500 × 450 mm - Heating plate manufacturer: ELKOM - Upper and lower platens separately controllable - Adjustable heating time - Automatic opening after heating time (optional) ==== Ejector System - Ejector size: 30 × 30 mm - Ejector stroke: 150 mm - Ejector force: 15 t - Ejector speed: 25 mm/s - Number of ejectors: 1 ==== Equipment - Swing-mounted two-hand control - Interior lighting - Pressure adjustment via rotary control (10 steps) - Heating plates with T-slots per DIN 650 (customized) - Insulation of heating plates from machine frame ==== Options - Light barriers front and rear: €6,800 - Double door with rear-side monitoring: €2,400 - Door with right-side monitoring: €1,200 - Door with left-side monitoring: €1,200 ===== Rcsdpfxofxyh Ro Adcjh Vulcanization, rubber processing, plastics processing, laminating processes, compression molding, thermal pressing methods, hot pressing Vulcanizing press, heated press, hydraulic press, rubber press, laminating press, compression mold press, thermoforming press, tryout press, tool tryout press Looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they also fully comply with Brazilian national safety directive NR 12, which builds on these standards. Our main strengths are special purpose machine construction and press automation. We supply customized hydraulic presses at surprisingly competitive prices. For the hydraulic systems, we primarily use components from leading European manufacturers.

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 2003, REP rubber injection moulding press 25 tonnes Year: 2003 Redpeizi H Hjfx Adcoch The four columns need to be replaced (repair cost: €9,000)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, jam operasional: 7.500 h, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, jumlah injeksi: 1, Excellent, like-new condition rubber injection moulding machine from 2020. Very low operating hours, well maintained. Clamping force: 600 tons Injection volume: 2500 cm³ Heated platen dimensions: 1200 x 1300 mm FIFO injection system: 2500 bar Core lifter on moving platen Core lifter on fixed platen Data backup via CF card Energy savings with servo pump control Rcedpstu H Stsfx Adcsh

Kondisi: bekas, de Rcodpfxjxrc Eqo Adcsh

Kondisi: bekas, de Redexrdgvepfx Adcoch

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, gaya penekanan: 120 t, panjang meja: 600 mm, lebar meja: 600 mm, Vulcanizing Press – Manufacturer: Hidrobrasil – 120 t Heated Press For sale is a hydraulic vulcanizing press from Hidrobrasil with a maximum pressing force of 120 t. The machine is equipped with heating plates measuring 600 × 600 mm, flexible pressure adjustment, as well as comprehensive control and safety features. It is ideally suited for vulcanization, laminating, and thermal pressing processes in rubber and plastics processing. ===== Technical Data & Information: Vulcanizing Press Hidrobrasil – Heated Press ==== General Information - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Heated Press / Vulcanizing Press - Pressing Force: 120 t (max. 1,600 kN) - Pressure Range: 30 – 120 t - Machine Weight: approx. 9 t - Dimensions (L × W × H): approx. 2,000 × 1,000 × 2,800 mm - Table Height above Floor: 850 mm - Minimum Hall Height: 3,500 mm ==== Working Area - Stroke: 400 mm - Opening per Level: 200 mm - Min. Opening: 200 mm ==== Table and Ram - Table Size: 600 × 600 mm - Ram Size: 600 × 600 mm - Heating Plates: 600 × 600 mm (optional) ==== Forces - Maximum Free Stripping Force: 200 kN Rjdpfok S Dt Tjx Adcoch ==== Speeds - Idle Speed: up to 40 mm/s - Opening Speed: up to 40 mm/s - Pressing Speed: 5 – 15 mm/s ==== Hydraulics - Operating Pressure: max. 240 bar - Pressure Build-up Time: approx. 4 sec - Pressure Build-up Time (steel on steel): max. 8 sec - Pressure Accuracy: ± 5 bar - Pressure Holding Valve: up to 1,800 sec - Automatic Pressure Readjustment - Oil Volume: approx. 300 l (HLP 46) - Main Pump: Bosch Rexroth gear pump approx. 48 l/min - Max. Oil Temperature: 55 °C - Max. Ambient Temperature: 40 °C ==== Cooling and Lubrication - Circulation Oil Cooling - Oil Temperature Monitoring - Automatic Lubrication ==== Heating System - Electrically heated plates up to 250 °C (optional) - Thermally neutral: 80 – 120 °C ==== Control and Operation - Control panel integrated in switch cabinet - Two-hand operation - Programmable setup mode - Single stroke adjustable - Free positioning of the ram - Travel limitation by pressure or position - Signal lamp (red/yellow/green) ==== Safety - Light curtains (SICK / Leuze, 14.1 mm, front side) - Monitored rear door - Machine body double-coated ==== Electrical - Main Supply: 400 V AC - Control Voltage: 24 V DC - Frequency: 50 Hz - Hydraulic Motor: 15 kW - Total Connected Load: approx. 19 kW (without heating plates) ===== Vulcanization, rubber processing, plastics processing, laminating processes, compression molding, thermal pressing processes, hot pressing vulcanizing press, heating press, hydraulic press, rubber press, laminating press, compression press, thermo press, tryout press, tool tryout press

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, jam operasional: 730 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 2.700 kN, daya nominal: 22 kW (29,91 hp), tekanan kerja: 265 batang, Kami menawarkan mesin pengolah karet DESMA D 969.250 Z (S3) kondisi hampir baru, tahun pembuatan 2021. Tekanan penutupan: 2700 kN Volume injeksi: 500 cm³ Tekanan injeksi: 3500 bar Ukuran EUROMAP: 2700-1750 Tegangan: 400 V Frekuensi: 50 Hz Arus hubung singkat maks.: 10 kA Arus total: 138 A Sekering utama: 160 A Tekanan pompa: 265 bar Kapasitas alir penggerak pompa: 72/39 l/menit Konsumsi arus penggerak pompa: 32,0 A Daya penggerak pompa: 22 kW Tekanan unit nozzle: 58 kN Berat: 10,7 t Debit udara tekan: 0,5 m³/jam Tekanan udara tekan: 6 bar Debit air pendingin: 1,6 m³/jam Suhu maksimum air pendingin: 20°C Jam operasi motor hidrolik: 730 jam, pompa hidrolik (gaya penutupan): 65 jam, Operating System: aktif 3.360 jam Rcjdpfx Adszgvxyjcsh Ideal untuk produksi: - Komponen karet teknis - Segel dan O-ring - Komponen otomotif dan industri Kondisi & Ketersediaan: - Mesin tersedia dalam waktu singkat - Kondisi: sangat terawat / perawatan rutin - Inspeksi dapat dilakukan dengan perjanjian Lain-lain: - Dokumentasi dan aksesori tambahan jika diperlukan atas permintaan - Dukungan untuk pembongkaran / pemuatan / transportasi dapat diatur Jika Anda memiliki pertanyaan lebih lanjut atau membutuhkan informasi tambahan, silakan kirimkan pesan atau hubungi kami langsung.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, Lini produksi untuk pelat insulasi NBR dan PVC untuk ekstrusi karet / tersedia segera Rjdsy Exrpjpfx Adcoch Lini produksi ini dalam kondisi seperti baru dan dapat segera dikirim dengan jumlah jam operasional yang sedikit. Komponen lini produksi: 1. Zhejiang Baina 150 20D 1000 kg/jam ekstruder vakum dingin (standar) 2. Zhejiang Baina EJ-PPF-150-04-00 kepala ekstrusi kerucut (pneumatik) 3. Zhejiang Baina oven pengering inframerah 6 m (lebar 1000 mm) 4. Zhejiang Baina oven pengering udara panas 6 m (lebar 1140 mm) 5. Zhejiang Baina oven pengering udara panas 6 m (lebar 1440 mm) 6. Zhejiang Baina oven pengering udara panas 6 m (lebar 1600 mm) 7. Zhejiang Baina oven pengering udara panas 6 m (lebar 1800 mm) 8. Zhejiang Baina oven pengering udara panas 6 m (lebar 2000 mm) 9. Zhejiang Baina oven pengering udara panas 6 m (lebar 1800 mm) 2300 mm) 10. Zhejiang Baina oven pengering udara panas 6 m (lebar 2500 mm) 11. Zhejiang Baina oven pengering udara panas 6 m (lebar 2800 mm) 12. Zhejiang Baina 36M FF-SLX-02-00 (3 lapis @ 12 m) sistem pendingin 13. Mesin pemotong otomatis PCM untuk pemotongan memanjang dan melintang (2000 mm) 14. Pendingin cairan AC-15AD dengan tangki air 285 liter Jika Anda tertarik, kami dengan senang hati akan mengirimkan deskripsi rinci dan data terkait.

Tahun pembuatan: 1977, Kondisi: bekas, Pressing force 200 t Column gap 500 mm Stroke 150 mm Ram surface 320 mm Table surface 470x400 mm Machine weight approx. 12 t Space requirement approx. 2000x2000x2700 mm Sick BWS for safety and cycle operation Rsdpfx Aslp Uz Uedcjch Two-hand control Mechanical fixed stop Pressure switch Pressure holding time Rapid working stroke Approved for manual loading operations