Mesin gergaji bundar dan penggilingan gabungan

WINTER KSF-315-2000

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, For wood chips and wood dust. Designed for commercial applications. All clean air extraction units in this series are H3 dust-tested, with a residual dust content of less than 0.1 mg/m³. High extraction performance with minimal space requirements Maximum performance in this class Very quiet operation Application area: Clean air extraction units for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with the corresponding extraction port diameter Can also be used for multiple dust sources High-quality, well-designed construction Robust and compact housing made of galvanized sheet steel Extraction port can be easily converted from left to right, offering flexible use Large maintenance openings Large-capacity, mobile chip containers with clamping bracket and chip collection bag System is delivered completely assembled – ready for immediate use Mobile unit Filter description: Ultra-compact design with maximum filter surface area Filter material made from polyester fleece, aluminized, washable, providing a long service life Filter supplied as standard in antistatic design, BIA category M-tested and approved Filter resistance monitoring via differential pressure gauge, adjustable with warning light on the control panel The fan is installed downstream of the filter Standard features: Cgsdpfxocnw U De Abhon Innovative locking device for secure container positioning All units of this series H3 dust-tested, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal impeller Maintenance opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed and 2 swivel castors with locking brake Preconfigured for machine monitoring connection (up to 8 machines) and slide valve controls Manual filter cleaning Optional sound pressure silencer available Model: RLA 125 M Item No.: 5131256 Technical Data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal air flow rate: 1095 m³/h Max. air flow rate: [not specified] Negative pressure at nominal flow: [not specified] Filter surface area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from bottom edge of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Kondisi: bekas, 04493 Combined Machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Cjdsxl Ha Sspfx Abhjgn Aluminum heating plates 2280 x 1000 mm (L x W) Lower plate extendable Opening width approx. 145 mm Total pressing force 40 tons, maximum specific pressing pressure 2 kg/cm² Heating: 2 x 1.8 kW - Wide-belt sanding machine 3 kW Table 2600 x 750 mm (L x W), extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right run, speed 19 m/s - Panel saw / veneer saw / trimming saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, cutting height adjustable 0 - 60 mm Max. saw blade diameter 250 mm With chain feed - Dust extraction for sander and saw 0.55 kW Extraction capacity approx. 11 m³/min Push-button control panel with main switch and emergency stop switches Machine mounted on chassis Footprint according to manufacturer: 7.5 m² Transport dimensions approx. 3900 x 2100 x 1400 mm (L x W x H) Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment. Sale in as-is condition Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee. Subject to prior sale No warranty is given on used machines; the following applies: "sold as seen" Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex stock

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1974, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 74-4-10, ALTENDORF F90 panel saw, year of manufacture 1974 Machine no.: 74-4-10 Manufacturer: Altendorf, Germany Saw length: 2600 mm Cutting width: 1,300 mm Max. cutting height: 130 mm Max. saw blade diameter: 400 mm Main motor: 5.5 kW With scoring unit Cgjdpsipvrbsfx Abhon 4 speed settings Saw blade height adjustment: manual Approximate weight: 780 kg Technical data subject to change

Kondisi: baru, Tahun pembuatan: 2026, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder and anodized aluminium sliding table Rigid steel/cast iron construction Large support surface and precision cast iron table High-precision sliding table made of anodized aluminium (travel distance 2250 mm) Large crosscut frame (900 x 600 mm) with up to 2660 mm extendable aluminium telescopic fence with professional flip stops Max. saw blade diameter 315 mm with scoring unit, tiltable from 90° to 45° Rip fence with fine adjustment Robust saw unit and large, double trunnion spindle moulder unit ensure maximum stability, precision, smooth operation, and long service life Solid and precise machine table made from stress-relieved cast iron Three spindle speeds, manually adjustable from 3500 to 10000 rpm Spindle moulder with reversible rotation Standard arching cutter guard Safety reversing fence jaws made of aluminium Two motors with high performance reserves Cgedpfxjhp Rdls Abhjn Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx.: 470 kg Extraction connection Extraction port diameter: 2 x 120 mm Extraction port diameter saw blade guard: 60 mm Electrical data Drive motor power: 2 x 5.0 kW Connection voltage: 400 V Mains frequency: 50 Hz Spindle moulder Spindle tilt: 0 – -45 ° Useful spindle length: 100 mm Spindle speeds: 3500/7000/10000 rpm Max. cutter diameter not retractable: 210 mm retractable: 180 mm Tenoning: 275 mm Circular saw unit Crosscut length: 1600 mm Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 2660 mm Saw blade tilt: 90 45 ° Max. cutting height at 90°: 90 mm Max. cutting height at 45°: 63 mm Max. saw blade projection at 90°: 100 mm Max. saw blade projection at 45°: 78 mm (Main) saw blade diameter: 315 mm Remark (main) saw blade diameter: independent of scoring blade (Main) saw blade speed: 4000 rpm Sliding table and table Table length: 1112 mm Table width: 430 mm Scope of delivery: Arching cutter guard Anodized aluminium format sliding table Aluminium fence jaws Flip stops Location: Ex stock 54634 Bitburg - Available immediately -

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 690924, Connection rating 380V 1.84kW Cgjdpfx Abeh U Damjhon Speed 2840 rpm Number of spindles: 21 units, 32 mm pitch Spindle spacing 640 mm Spindle rotation: 11 right-handed, 10 left-handed, M10 thread 2x safety clamps Pneumatic foot valve Table size 880 x 400 mm 1x side stop with 2 flip stops 1x base stop 1x mitre stop Please note: We are unable to respond to inquiries without complete contact details.

Kondisi: sangat baik (bekas), Four-sided planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor: 4 kW Csdpferigxyjx Abhsgn Fully adjustable heads Electrically adjustable planing height and width Spindle diameter: 40 mm Feed via cardan shaft rollers, stepless adjustment Robust planer by WEINIG Machine length: 415 cm The machine has been inspected and is in original condition

Kondisi: bekas, Thicknesser: Lebar penyerutan maksimal: 400 mm Tinggi penyerutan maksimal: 240 mm Panjang minimum benda kerja: 200 mm Diameter poros pisau: 700 mm Jumlah pisau: 3 Putaran poros pisau: 5000 rpm Penyesuaian tinggi kerja manual Joiner: Panjang total meja: 1810 mm Meja dapat diatur Peredam suara pada poros pisau Pelindung poros pisau Lubang ekstraksi: 2x120 mm Fencing miring Daya listrik: 400 V Daya motor: 5 kW Codpfx Aoxwvqdobhogn Dimensi keseluruhan: Panjang: 2030 mm Lebar: 800 mm Tinggi: 1160 mm

Kondisi: sangat baik (bekas), Bandschleifmaschine LANGZAUNER Model LZG Approx. sanding table dimensions: 2500 x 800 mm Approx. sanding belt dimensions: 6800 x 150 mm Motor power approx.: 3.0 kW, 400 V, 50 Hz Motor protection switch Manual table height adjustment Right/left rotation of sanding belt Csdpfeuxnyujx Abhjgn Sanding belt cover on top Light bar for work area CE compliant Includes special sanding shoe Includes extraction fan NEW GRAPHITE CLOTH Note for used machines: • Technical details and prior sale subject to errors. • Prices quoted are ex-location, loaded free of charge. • The machines have been cleaned and function tested. • All machines are purchased as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (Inquiries will only be answered with your address and telephone number!)

Kondisi: sangat baik (bekas), Robland SD-B 510 Mesin Planer Tebal, Mesin Serut, dan Mesin Bor - Pengangkatan elektrik - Tinggi serut: 25 cm Cgsdpfxex Ha Eas Abhon - Panjang meja planer: 2250 mm - 4 pisau standar - 4 kecepatan pengumpan, dapat diatur melalui sakelar - Ruang peredam suara - Meja planer tebal tanpa rol, dengan 4 tiang penyangga - Mesin bor horizontal dengan perangkat penjepit eksentrik - Berat: 1300 kg Mesin dalam kondisi sangat baik, tampak seperti baru, belum dicat.

Kondisi: bekas, Connect Four – The Success Building Blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions OUR OFFER Chipboard approx. 4,000 m² Panel size: 3,200 mm x 1,000 mm x 38 mm P6 coating Net square meter price: €8.00 This is a used item. PROJECT PLANNING Our sales team will be happy to provide you with a non-binding, customised offer to meet your requirements. TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the goods. TERMS OF PAYMENT Codpfx Abovdqhbehsgn Payment terms are to be agreed in the event of an order. The price indicated is per piece/net price or as specified in the item description (plus VAT). You will, of course, receive an invoice with VAT stated separately. ABOUT US DLK, based in Nordhorn, deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us.