Mesin gergaji bundar dan penggilingan gabungan

WINTER KSF-315-2600

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, For wood chips and wood dust. Designed for commercial applications. All clean air extraction units in this series are H3 dust-tested, with a residual dust content of less than 0.1 mg/m³. High extraction performance with minimal space requirements Maximum performance in this class Very quiet operation Application area: Clean air extraction units for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with the corresponding extraction port diameter Can also be used for multiple dust sources High-quality, well-designed construction Robust and compact housing made of galvanized sheet steel Extraction port can be easily converted from left to right, offering flexible use Large maintenance openings Large-capacity, mobile chip containers with clamping bracket and chip collection bag System is delivered completely assembled – ready for immediate use Mobile unit Filter description: Ultra-compact design with maximum filter surface area Filter material made from polyester fleece, aluminized, washable, providing a long service life Filter supplied as standard in antistatic design, BIA category M-tested and approved Filter resistance monitoring via differential pressure gauge, adjustable with warning light on the control panel The fan is installed downstream of the filter Standard features: Innovative locking device for secure container positioning All units of this series H3 dust-tested, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal impeller Maintenance opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed and 2 swivel castors with locking brake Preconfigured for machine monitoring connection (up to 8 machines) and slide valve controls Manual filter cleaning Optional sound pressure silencer available Model: RLA 125 M Nedpecnw U Dofx Ahwowc Item No.: 5131256 Technical Data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal air flow rate: 1095 m³/h Max. air flow rate: [not specified] Negative pressure at nominal flow: [not specified] Filter surface area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from bottom edge of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Kondisi: bekas, 04493 Combined Machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminum heating plates 2280 x 1000 mm (L x W) Lower plate extendable Opening width approx. 145 mm Total pressing force 40 tons, maximum specific pressing pressure 2 kg/cm² Heating: 2 x 1.8 kW - Wide-belt sanding machine 3 kW Table 2600 x 750 mm (L x W), extendable Sanding height 200 mm Nwjdpjxl Ha Sjfx Ahwsc Belt length 6800 mm Belt width 120 - 150 mm Left/right run, speed 19 m/s - Panel saw / veneer saw / trimming saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, cutting height adjustable 0 - 60 mm Max. saw blade diameter 250 mm With chain feed - Dust extraction for sander and saw 0.55 kW Extraction capacity approx. 11 m³/min Push-button control panel with main switch and emergency stop switches Machine mounted on chassis Footprint according to manufacturer: 7.5 m² Transport dimensions approx. 3900 x 2100 x 1400 mm (L x W x H) Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment. Sale in as-is condition Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee. Subject to prior sale No warranty is given on used machines; the following applies: "sold as seen" Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex stock

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, * New machine * Kubota engine, 18.2 kW * Operating weight: 2,100 kg * Lifting capacity: 2,260 kg * Tires: 27x10.50-15 SKID (machine width 116 cm) * 1st auxiliary hydraulic circuit (double-acting) proportional on joystick incl. continuous operation * ROPS cab incl. heating, 2 mirrors, 2x halogen work lights front & rear, radio – mechanically suspended, adjustable comfort seat with seatbelt & armrest * StVZO road package up to 20 km/h * Road lighting (halogen) * Extended fenders * Rear counterweight plate (90 kg) incl. towing coupling * Standard bucket 1,200mm wide and pallet forks 1,000mm Nwodew Hxtispfx Ahwec

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, For sale is a used Hammer circular saw and spindle moulder B3Winner Comfort with a cutting length of 2000 mm. The machine is in excellent condition and has been serviced and checked by our specialist staff. (Fully functional) Technical specifications: - Tilting circular saw and moulder 90-45° - Sliding table 2000 mm - Outrigger table with angle index raster - Mitre fence 1300 mm - 4 spindle speeds: 3000/6000/8000/10000 rpm - Cutting width 800 mm - Dual-motor, each 5.5 HP (4 kW) 400 Volt - Year of manufacture: 2019 The machine is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: circular saw, spindle moulder, milling machine, combination machine Reference: R-L0AHG Nwodjv Sbpxspfx Ahwjc

Kondisi: baru, Tahun pembuatan: 2022, jam operasional: 1 h, nomor mesin/kendaraan: 268955558, GREMAC e1 Trommel screening plant Tandem chassis / axles - 2x kg (permissible total weight) - kg unladen weight without unit - Overrun brake - Vehicle lighting according to StVZO Nwjdpfxjl Hbcfo Ahwec - TÜV certification Drum - Length: mm - Diameter: mm - 4.0 kW electric drive - Speed adjustable with frequency inverter - Lifter flights - Adjustable cleaning brush Hopper with feed conveyor - Rubber belt with chevron profile - 0.75 kW electric drive - Speed adjustable with frequency inverter Fine material collection belt - Movable suspension - Smooth rubber belt - 1.5 kW electric drive - Speed adjustable with frequency inverter Fine material conveyor - Movable suspension - Rubber belt with chevron profile - 2.2 kW electric drive - Speed adjustable with frequency inverter - 25° incline - Manual cable winch for angle adjustment Oversize discharge conveyor - Movable suspension - Rubber belt with chevron profile - 1.5 kW electric drive - Speed adjustable with frequency inverter - 25° incline - Manual cable winch for angle adjustment Control system - Siemens LOGO PLC - Control panel with buttons and potentiometers - 400V power circuit - 24V control circuit - Main switch - Ceekon 16A socket - Emergency stop relay - Without generator Cladding - Hot-dip galvanized frame parts - Painted drum - Powder-coated covers in RAL 7005 and 5018 Additional Information Intended use: Construction Overall condition: very good Technical condition: very good Visual appearance: very good Delivery terms: EXW,

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1974, nomor mesin/kendaraan: 74-4-10, Fungsionalitas: berfungsi sepenuhnya, ALTENDORF F90 panel saw, year of manufacture 1974 Machine no.: 74-4-10 Manufacturer: Altendorf, Germany Saw length: 2600 mm Cutting width: 1,300 mm Nwsdpjipvrbofx Ahwec Max. cutting height: 130 mm Max. saw blade diameter: 400 mm Main motor: 5.5 kW With scoring unit 4 speed settings Saw blade height adjustment: manual Approximate weight: 780 kg Technical data subject to change

Kondisi: baru, Tahun pembuatan: 2026, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder and anodized aluminium sliding table Rigid steel/cast iron construction Large support surface and precision cast iron table High-precision sliding table made of anodized aluminium (travel distance 2250 mm) Large crosscut frame (900 x 600 mm) with up to 2660 mm extendable aluminium telescopic fence with professional flip stops Max. saw blade diameter 315 mm with scoring unit, tiltable from 90° to 45° Nwsdpfjhp Rdlsx Ahwjc Rip fence with fine adjustment Robust saw unit and large, double trunnion spindle moulder unit ensure maximum stability, precision, smooth operation, and long service life Solid and precise machine table made from stress-relieved cast iron Three spindle speeds, manually adjustable from 3500 to 10000 rpm Spindle moulder with reversible rotation Standard arching cutter guard Safety reversing fence jaws made of aluminium Two motors with high performance reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx.: 470 kg Extraction connection Extraction port diameter: 2 x 120 mm Extraction port diameter saw blade guard: 60 mm Electrical data Drive motor power: 2 x 5.0 kW Connection voltage: 400 V Mains frequency: 50 Hz Spindle moulder Spindle tilt: 0 – -45 ° Useful spindle length: 100 mm Spindle speeds: 3500/7000/10000 rpm Max. cutter diameter not retractable: 210 mm retractable: 180 mm Tenoning: 275 mm Circular saw unit Crosscut length: 1600 mm Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 2660 mm Saw blade tilt: 90 45 ° Max. cutting height at 90°: 90 mm Max. cutting height at 45°: 63 mm Max. saw blade projection at 90°: 100 mm Max. saw blade projection at 45°: 78 mm (Main) saw blade diameter: 315 mm Remark (main) saw blade diameter: independent of scoring blade (Main) saw blade speed: 4000 rpm Sliding table and table Table length: 1112 mm Table width: 430 mm Scope of delivery: Arching cutter guard Anodized aluminium format sliding table Aluminium fence jaws Flip stops Location: Ex stock 54634 Bitburg - Available immediately -

Kondisi: baik (bekas), Tahun pembuatan: 1990, daya: 5,5 kW (7,48 hp), ketinggian potong (maks.): 140 mm, lebar pemotongan (maks.): 1.000 mm, panjang meja: 1.400 mm, Types: F 45, Machine no.: 90-8-86 Njdpotxh Nisfx Ahwswc

Kondisi: sangat baik (bekas), Bandschleifmaschine LANGZAUNER Model LZG Approx. sanding table dimensions: 2500 x 800 mm Approx. sanding belt dimensions: 6800 x 150 mm Motor power approx.: 3.0 kW, 400 V, 50 Hz Motor protection switch Manual table height adjustment Nedpfxjuxnyuo Ahwswc Right/left rotation of sanding belt Sanding belt cover on top Light bar for work area CE compliant Includes special sanding shoe Includes extraction fan NEW GRAPHITE CLOTH Note for used machines: • Technical details and prior sale subject to errors. • Prices quoted are ex-location, loaded free of charge. • The machines have been cleaned and function tested. • All machines are purchased as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (Inquiries will only be answered with your address and telephone number!)

Kondisi: baru, en Nwjdpfx Askyt Ulohwec