Perekatan

WINTER VP-3000

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Maximum pressing length approx. 2,750 mm Maximum gluing width approx. 1,750 mm 10 freely movable support arms, each equipped with a hydraulic pressing cylinder and one counterpressure unit adjustable in increments Pressing cylinders can be freely positioned on the support arms Support arms are suspended from above, allowing for quick transfer from one side to the other Kjdpfx Asww Awgeahjfa Dimensions of pressing unit cylinder: 115 x 50 mm Dimensions of counterpressure unit: 115 x 50 mm Maximum cylinder stroke approx. 30 mm Gluing rack can be moved on rollers Installation dimensions (L x W x H): 3.1 x 1.0 x 2.25 m Pressing cylinders have been pressure-tested in stock.

Kondisi: bekas, Slot spindle 1 pc. Number of milling units: 5 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely inspected prior to delivery ----- Technical Data Summary (additional accessories possibly included upon request) Pos. 1: Crosscut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment pneumatically controlled in 8 positions, e.g., for edge rounding from above > Laser alignment light for recognizing the saw section Pos. 2: Rounding Unit Horizontal Bottom ----- Kfjdovu Hghjpfx Aahja > Position: horizontal bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9000 rpm > Max. tool diameter: 130 mm > Axial adjustment mechanically coupled to crosscut saw > Radial adjustment pneumatically controlled on/off NC-controlled length stop ----- > Length: 3500 mm > Electronic length stop Pos. 3: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless, NC-controlled > Spindle speed: 3,500 rpm > Max. tool diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 4: 1st Profiling Spindle (climb and conventional milling) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 7.5 kW Pos. 5: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless, NC-controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash bar guide consisting of: Guide fence on the stop (area of climb-cut spindle), Sash bar support rail from above in the area of vertical right profiling unit and profiling spindle. Pos. 6: Profiling/Milling Unit, Horizontal Top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial adjustment: 30 mm, 8 positions > Radial adjustment: 125 mm, 8 positions Pos. 7: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions > Radial adjustment: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool diameter: 210 mm > Motor power: 3.0 kW Pos. 8: Profiling/Grooving Unit from Below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > ...

Kondisi: baik (bekas), Tahun pembuatan: 1990, RANDEK SP700 Crosscut Saw Manufacturer: Randek, Sweden Year of Manufacture: 1990 In good condition The SP700 series from Randek is a reliable saw designed for roof truss and house manufacturers worldwide. The SP700 saw is efficient, easy to operate, and precise. It has long been established on the market and is continuously improved in close collaboration with numerous customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all the cuts you require. The large saw blade diameter (700 mm) also allows you to cut multiple sections of stacked timber simultaneously. - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cycle - PLC-programmable saw - Wood fixation close to the cutting area for precise results Kodpfx Ash Ayyqoahsfa Roller conveyor system with 5 adjustable pneumatic stops. Length 6.25 m Discharge roller conveyor 4.10 m Complete line: 11.5 m Technical information subject to change.

Kondisi: bekas, Working width 4000 mm Working height 2600 mm Number of pressing cylinders 6 pcs. Dimensions (length/width/height) 5300 x 1250 x 3330 mm S&S Frame Press Type RP 2000, ----- CE version Robust frame-welded construction made of thick-walled special hollow profiles, sliding carriages and pressure beams with 50 mm hole grid. Continuous left-side abutment for width pressing, lower abutment on two levels. Vertical pressing cylinders on special pressure beams with single-handed quick adjustment with weight balance, height-adjustable in 50 mm hole grid, long sliding carriages ensure the permanent absorption of high pressing forces. Fast and smooth width adjustment via ball-bearing mounted carriage with central locking, fixation in 50 mm hole grid. Upper horizontal pressing cylinder infinitely height adjustable and fitted with weight compensation. Lower horizontal pressing cylinder with centering bores for the two abutment levels, with weight compensation. Abutment and pressure plate depth: 100 mm Pressure plate and support width: 130 mm Machine is electro-hydraulically controlled, equipped with 2 vertical pressing cylinders d = 50 mm, stroke 120 mm, double-acting, with weight compensation and single-handed quick adjustment, 2 horizontal pressing cylinders d = 40 mm, stroke 120 mm (double acting), with weight compensation; 2 manual control valves, pressure gauge, 1 pressure control valve from 20 to 125 bar corresponding to 400 to 2400 kg pressing pressure vertical, Kodeu Uvaljpfx Aahjfa with 3 kW three-phase motor for 400 Volt, 50 Hz mains voltage. Complete with electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey Working size: 4000 mm x 2600 mm (length x height) Space requirement: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: ----- Article ,00 pcs Central pressure beam with pressing cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article ,00 pcs Individual pressure regulation for central pressure beam, pressure regulation range up to max. 100 bar (for pressing of cross-bar windows) Article ,00 pcs Cross pressure device complete with pressing cylinder double-acting, weight compensation, pressure hose and shut-off valve Weight compensation on lower horizontal cylinder omitted Article ,00 pcs Individual pressure regulation for cross pressure device, pressure regulation range up to max. 100 bar (for pressing of cross-bar windows) Article ,00 pcs Shut-off valve for 3rd vertical cylinder Article ,00 pcs Shut-off valve for upper horizontal cylinder Article ,00 pcs Width compensation pad for pressing small frames to bridge the 1st pressure beam, including shut-off valve on 1st vertical cylinder Article ,00 pcs Basic equipment for counter profiles The required height increases by 100 mm Article All pressure plates and abutments covered with plastic Article ,00 pcs Triangle studio window pressing device consisting of: locking device for vertical pressure beams and 3 attachable, side-guided swing pressure plates Article ,00 pcs Double swing pressure plate for pointed (triangle) windows ----- Total price as specified above ex works: On request! -----

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, jam operasional: 1 h, Fungsionalitas: berfungsi sepenuhnya, panjang total: 9.100 mm, lebar total: 3.600 mm, Perusahaan kami memproduksi mesin dan peralatan untuk pabrik prefabrikasi rumah. Kami memproduksi meja perakitan tetap, meja rotasi, meja tipe kupu-kupu, serta lini produksi lengkap. Penawaran baru: meja perakitan berukuran 3,6 m x 9,0 m Ksdsvv Rv Ajpfx Aahjfa - Konstruksi dilapisi cat powder coating - Permukaan meja dilapisi multipleks berlapis tahan benturan - Lubang untuk pemasangan aktuator penekan SD-01 - Pin pembatas dapat dilepas dan diatur - Konstruksi modular untuk perakitan sendiri (satu palet) - Biaya transportasi rendah ke seluruh Eropa

Kondisi: baik (bekas), Slotting discs, window milling tool, indexable inserts, window manufacturing tool Kjdpfsb A Np Njx Aahefa - Slotting discs, milling tool for: wooden windows - Dufix: No./Var 46616 - Mounting: Ø 50 mm - Weight: 6.8 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Perforated Plate Press Schafberger + Sprödhuber (S+S Maschinenbau) Model LPP – SPECIAL FORMAT Universal Gluing Stand / Frame Press Pressing Surface approx. L x W 3800 x 3000 mm Setup Depth approx. 1300 mm 6 units hand-hydraulic cylinders with integrated pressure relief valve, 60 mm stroke, max. pressing force 2,000 kg, pressing force finely adjustable via hand lever, cylinders can be swiveled 360° as desired Incl. access ladder – on castors, retractable NEW MAGNETIC CLAMPS Ideal press for joineries producing frames, solid wood panels, or custom-shaped windows Equipped with various pressing elements, see photos. Used Machinery Notice: Kjdpfjtgq Ibjx Aahofa - Specifications subject to error and prior sale. - Listed prices are ex-works prices – free loaded! - The machine has been cleaned and function-tested. - All machines are sold as inspected on site, without any warranty. Buyers are welcome to inspect the machines on site. - Special agreements are only valid in written form. (We only respond to inquiries including your address and telephone number!)

Kondisi: bekas, Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, tinggi kerja: 2.400 mm, lebar kerja: 3.500 mm, daya: 1,5 kW (2,04 hp), 3 vertical, 2 lateral pressure cylinders Condition: function-tested, very good, used Kedpfx Aew Hlt Nsahjfa

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, jenis bahan bakar: diesel, konsumsi bahan bakar per jam: 2,5 l/j, kapasitas tangki bahan bakar: 20 l, berat keseluruhan: 2.800 kg, kondisi penggerak: 100 persen, kondisi rantai: 100 persen, Tersertifikasi DGUV hingga: 05/2026, inspeksi berikutnya (TÜV): 05/2026, kelas emisi: Euro 5, tipe tiang: telescopik, Tahun pembuatan: 2024, jam operasional: 35 h, Perlengkapan: Pemeriksaan keselamatan UVV, derek, hidrolik, track karet, Meticulously maintained mini crawler crane (demonstration unit, approx. 35 operating hours) with powerful performance in the smallest space! For sale: 3-ton spider crane – almost new, only 35 operating hours We are offering a high-quality 3-ton spider crane for sale. Technical specifications Lifting height: 16 m Type of drive: hydraulic motor, two-speed Motor voltage: AC 380 V Starting method: electric starter Dimensions: 3450 × 950 × 1700 mm Weight: 3,200 kg Engine: Changchai Euro V With remote control Optional accessories (included in the sale) Fly jib (3 metres) – for additional reach Man basket (200 kg load capacity) – ideal for installation work at heights Vacuum glass lifter – for safe and efficient handling of glass panes Safe load moment indicator – for maximum operational safety Remote control with display – for precise and convenient operation Kfsdpsw Ugkqofx Aahea Key advantages Only 35 operating hours, virtually as good as new Rugged construction, compact dimensions – ideal for confined job sites and indoor work Versatile use thanks to extensive range of accessories Ready for immediate use Excellent value for money Documentation and certification Comes with complete documentation for the German market, including: CE marking in accordance with the Machinery Directive (2006/42/EC) – required for commissioning within the EU Annual inspections in accordance with DGUV Regulation V52 (accident prevention regulation "Cranes") and four-yearly expert inspections by a DGUV- or BG-accredited body Inspection logbook (or electronic format) pursuant to BetrSichV for documentation of inspections

Kondisi: baru, Gesamthöhe 1500 mm Gesamtlänge 3000 mm 5 pneumatische Zylinder Druckluftdruck 8 bar Hub der pneumatischen Zylinder 100 mm Durchmesser der pneumatischen Zylinder 100 mm Kedpfxodpbn Aj Aahjfa