Creel berpenampang tipis

Wintersteiger DSG Eko Plus

Kondisi: bekas, Tahun pembuatan: 2001, Timber dimensions to be processed: Input lengths min/max: 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max: 40 - 300 mm Input thicknesses min/max: 15 - 120 mm Maximum timber cross-section: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw, min./max.: 510 – 2800 mm Special application: Cutting blocks, length min/max: 100 – 200 mm (Note: Multiple block lengths in new sorting; blocks are transported to the end of the sorting line and fall into customer-supplied mesh boxes) Cut-off/trimming tolerance: +/- 0.8 – 1.5 mm (for timber with minimal resin content and even surface. Tolerance up to 1m fixed length max.; tolerance for longer parts up to 2.5m). Thickness tolerance: +/- 3 mm Curvature of timbers in any direction: max. 10 mm per meter length Timber species: Softwood or hardwood System performance: Feed speed: steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 sec To attain the practical daily capacity, effectiveness factors dependent on the customer’s production conditions must be considered. Bedpfx Aew Sy T Hsa Told Infeed height and saw: 900 mm (To be mounted on customer-side platform, saw requires concrete base) Sorting height: 2000 mm Connection data: Total electrical connected load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Maximum voltage fluctuation: 5 % Compressed air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint color: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Non-driven support roller, front end in front of sheet metal table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera for detection of defect markings Pos. 4: Automatic contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version, with built-in waste chute, includes equipment package for large timber cross-sections Graphic input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control Processing capability: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on the outfeed conveyor Location: Nattheim

Kondisi: sangat baik (bekas), Independent machine – universal machine (first & second position in a production line) Electronic control – EasyLing programmer Safe and soundproof enclosure No. 3+3 vertical columns for supporting the processing units Min. usable working width (mm): 240 Max. usable working width (mm): 3,100 Min. usable working thickness (mm): 3 Max. usable working thickness (mm): 150 Retractable positioning cams, spacing (mm): 800 Feed rate (min/max), infinitely variable (m/min): 4 – 24 Total power No. 4 processing units (for each side of the machine): Blsdpfewhmdfex Aa Tsd Scoring unit Automatic scoring unit 1 x 3 kW (6,000 RPM) Planing unit 1 x 6 kW (6,000 RPM) 0–10° Universal milling unit (electropneumatically controlled) 1 x 6 kW (6,000 RPM) 0–90° Universal milling unit 1 x 6 kW (6,000 RPM) 0–90°

Kondisi: sangat baik (bekas), Line for door frames (casings), for cutting, milling of strike plates and insertion of hinges (ANUBA) composed of: X10030A) Discharge conveyor X10030B) Transfer unit X10030C) Double cutting and drilling machine "AMS" - Left side cut 45° - Drilling - Cut 90° - Right side cut 45° - Drilling Bsdoqwycljpfx Aa Told X10030D) Angle conveyor (90°) X10030E) Anuba hinge insertion machine "MASTERWOOD" Model MULTITEC X10030F) Strike plate milling machine "MASTERWOOD" Model Teknomat 3000

Kondisi: bekas, Tahun pembuatan: 2014, Drive power: 3 kW Operating pressure: 7 bar Air delivery / l Weight: 286 kg Chicago Pneumatic CPVR15 CE Screw Compressor – Year of manufacture: 2014 The CPVR15 CE impresses with its robust construction, long service life, and low operating costs. Whether in workshops, craft businesses, or industrial applications – this compressor provides reliable compressed air supply. Drive power: 3 kW Operating pressure: 7 bar Air flow: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50–58 dB(A) Voltage/Frequency: 415 V / 50 Hz Blsdpfx Aaeh A Sfds Tod Application: Workshops, craft businesses, industrial applications with medium compressed air demand Scope of delivery: 1x Compressor – Chicago Pneumatic CPVR15 CE 1x Refrigeration dryer – OMI ESD 108 – 0.70 kW 1x Beko Öwamat 2 – oil-water separator Technical data taken from publicly available sources.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, We offer for sale a complete multi-point automatic steel wire welding line by SCHLATTER. Bsdpfx Astvpilja Tsld We have three fully operational production lines available. Automatic machines for the production of cross wires (so-called straightening and cutting machines) are also available. Additionally, we stock a range of single spot welders for steel wires.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, Oil-hydraulic Double-Column Press 400 T with Sliding Table Press Type: Double-Column Press Thermally Neutral Range: 80 – 120 °C Number of Operator Sides: 1 side Forces: - Pressing Force max.: 4,000 kN - Free Tearing Force max.: 400 kN - Pressure Build-Up Time (Closed Tool, Steel on Steel): Max. 4 sec. Dimensions: - Length: 3,800 mm - Width: 4,475 mm - Max. Opening: 800 mm - Stroke: 800 mm - Table Height above floor: 1,100 mm - Total height above floor (overall height): approx. 4,300 mm - Minimum hall height: 5,500 mm - Parallelism deviation at 20°C: +/- 0.1 mm Deflection: - Determined at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight: - Total weight of the press (without operating fluids and table plate): approx. 28 t Press Table: - Table size: 1,500 x 1,500 mm Speeds: - Fast closing speed: 100 mm/s - Pressing speed: 8 – 3 mm/s Noise Level: - Sound pressure level measured at 1.5m height at control panel according to DIN 45635-T16-KL3: max. 78 dB(A) Hydraulics: - Number of main cylinders/ram cylinders: 1 pc. - Operating pressure: max. 300 bar - Pressure build-up time (press): 4 sec. - Pressure accuracy during ram stroke: +/- 3 bar - Main pump: BOSCH REXROTH axial piston pump approx. 145 L/min - Oil volume: approx. HLP 46 MW, 1,000 liters - Ambient temperature: max. 40 °C - Oil temperature: max. 55 °C - Auxiliary pump: BOSCH REXROTH gear pump 10 L/min for pressure maintenance up to 300 sec. Electrical System: - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Hydraulic main motor connection: 40 kW Features: - Sliding table press with 400 T capacity - Closing speed up to 100 mm/s (adjustable via touchscreen) - Opening speed up to 100 mm/s (adjustable via touchscreen) - Pressing speed start at 10 mm/s (adjustable via touchscreen) - Table plate size: 1,500 x 1,500 mm - Ram size approx. 1,600 x 1,500 mm - Oil temperature monitoring: 55°C warning, 60°C shutdown - Automatic lubrication (adjustable via touchscreen) - Free positioning of ram (adjustable via touchscreen) - SICK/PILZ light curtains 14 mm, front, up to 1,800 mm height - Hydraulic and mechanical ram locking - Circulation oil cooling (adjustable via touchscreen) - Ejector in table, 20 T press force, 350 mm stroke - Ejector travels outward with table - Table plate precision milled, with DIN 22 T-slots - Pressure setting from 60 T to 400 T (adjustable via touchscreen) - Travel limit optionally by pressure or position - Setup, single stroke, and automatic cycle operation (adjustable via touchscreen) Blodjph Uk Njpfx Aa Tod - Swivelling control panel on cabinet - Two-hand safety operation, with open button, selector switch for manual/single stroke/automatic cycle - Assembly, commissioning, and training available at extra charge - Control system supplied by SIEMENS (S7 1200), with 9-inch touchscreen monitor. Scope of delivery includes SECOMEA Ethernet-based remote maintenance unit. - The press features two side windows, each 1,000 mm high and 800 mm wide, with double doors. (Sliding Table Press, Hydraulic Press, Double-Column Press)

Kondisi: bekas, Block Bandsaw Cutting Thickness Calculator Bodpfx Aasiwaxno Tjld Cutting Thickness Computer Alternative to Mudata Control System with option for individual customization Industrial Touch PC Siemens Simatic S7 with rotary encoder or other measurement systems Cutting programs can be easily modified Cutting programs can also be organized into groups Software customized according to customer requirements Operation possible via touch display or keyboard Next step in cutting program can be triggered via button on joystick All relevant values can be individually displayed on the screen (e.g. total distance, next cut, complete cutting program, previous cut dimension, feed rate, and more) All parameters can be displayed and modified either on their dedicated parameter page or on the main screen A sensor for blade deviation monitoring can be evaluated (potentially linked with the feed rate) Feed positioning via proportional valve and hydraulic motor or via stepper motor Inspection in operation possible by arrangement Currently in operation on Primultini SGA 1300 CEB Suitable for any carriage size and make For an appointment or further details, please contact us by phone.

Kondisi: baru, Tahun pembuatan: 2025, Concept Easy adalah alat bantu pemasangan ideal untuk sambungan dowel saat pengepresan korpus serta saat pembuatan laci. Ringkasan produk: • Membutuhkan ruang kecil, kurang dari 1,8 m2 • Potensiometer untuk pengaturan gaya tekan yang tak bertingkat • Gaya tekan minimum 300 daN (kg) • Gaya tekan maksimum 2200 daN (kg) • 3 kecepatan penekanan dan penyesuaian: 5 / 10 / 25 mm/detik (dengan posisi presisi / gerakan lambat) Blodpfxedx Daas Aa Tjd • Waktu tekan dapat diatur bebas dengan fungsi buka otomatis

Kondisi: sangat baik (bekas), Single-Sided Destacking Station - Upper traverse horizontally movable by 180° Bjdjcggy Sspfx Aa Tsld - Console table with vacuum clamps - Internal lifting platform with motorized sheet metal roller conveyor - Sliding front safety guard - Separate control cabinet and operator panel - External roller conveyor for stack of sheets from the destacking unit - External powered roller conveyor from destacking unit, also with belt for transferring sheets at 90° - Operating capacity (cycles/min): 12–15 - Sheet thickness (min/max) mm: 10–40 - Min. sheet dimensions mm: 250 x 320 - Max. sheet dimensions mm: 1200 x 3000 - Total connected load kW: 10

Kondisi: baru, Tahun pembuatan: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60°-90°-30° Swivel adjustment with crank: yes Roller conveyor / support table: yes Saw blade diameter: 420 mm Bodjizkhvspfx Aa Teld Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Extraction connection: 100 mm Roller conveyor length: 2 x 1500 mm Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Weight: