Mixer

WITTMANN GRAVIMAX G14 (3400)

Kondisi: bekas, Tahun pembuatan: 2008, Closure GL 18 Kdjdpfxedqbzqe Al Ajt Closure for medicine bottle, GL18 size Injection mold with 10 cavities

Kondisi: baik (bekas), Tahun pembuatan: 1998, Battenfeld 600/200 CDC Unlocking force: 4000 kN Clamping force: 60 tons Kdedeg Emvhopfx Al Ajt Year of manufacture: 1997 Screw diameter: 30 mm Shot weight approx. 90 g

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), Max. throughput: 370 kg/h, connected load: 0.25 kW, length: 950 mm, width: 950 mm, height: 1115 mm, weight: 75 kg, including automatic filling, frame stand, level valve, inspection shaft, and documentation. Kdedpfx Aljh Akm Te Aot

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, kapasitas pendinginan: 680 kW (924,54 hp), Perlengkapan: unit pendingin, Condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture: 2004 Nominal capacity: 680.4 / 579.2 kW Refrigerant: R404 Kdedpfx Alevllxds Aot Refrigerant content: 218.9 + 25 liters Flow rate: Temperature range: -50°C to +100°C Maximum pressure: Operating pressure: 28 bar / -1 bar (Capacity depends on operating parameters) Number of fans: 5, diameter 900 mm Airflow rate: 162,500 / 131,000 m³/h Motor power consumption: 17.60 / 11.50 kW Heat exchanger surface area: Operating noise: 52 dB Length: mm Height: mm Width: mm Weight: approx. kg The cooler has been technically tested and is fully functional.

Kondisi: baik (bekas), Tahun pembuatan: 2004, Peripheral devices Brand: Tool - Temp Kdsdpfx Alsh Hbpwe Aot Type: TT - 157E Available: 14 units

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jam operasional: 23.905 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 600 kN, diameter sekrup: 35 mm, volume langkah: 135 cm³, tekanan injeksi: 2.221 batang, langkah pembukaan: 335 mm, panjang total: 2.420 mm, lebar total: 1.700 mm, tinggi total: 3.100 mm, berat keseluruhan: 6.700 kg, Perlengkapan: dokumentasi / manual, Dijual mesin injection molding ENGEL INSERT 200V/60 yang terawat dengan hanya 23.905 jam operasi. Mesin ini hanya digunakan untuk pengujian sampel. Kodey Iwlaspfx Al Aodt Inspeksi dengan arus listrik dapat dilakukan kapan saja! Data teknis sesuai gambar! Mesin tersedia segera!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, kapasitas pendinginan: 800 kW (1.087,70 hp), berat keseluruhan: 4.500 kg, Perlengkapan: kompresor, pendingin beku, Chiller unit Trane RTUB224 Cooling capacity: 800 kW Number of cooling circuits: 1 Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 Including dry coolers 1x Güntner GWH 090.1D/5-M Kdsdpfxorzq Ars Al Ast PT: 30.8 bar PS: 28 bar The specified cooling capacity is based on a water outlet temperature of +7°C with a condensing temperature of +40°C.

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2198535, berat keseluruhan: 2.409 kg, jenis bahan bakar: diesel, kapasitas tangki: 600 l, warna: merah, daya: 160 kW (217,54 hp), tegangan keluaran: 400 V, frekuensi keluaran: 50 Hz, jenis arus keluaran: tiga fasa, daya nominal: 160 kW (217,54 hp), daya nominal (semu): 220 kVA, daya kontinu: 160 kW (217,54 hp), daya semu kontinu: 220 kVA, panjang total: 3.300 mm, lebar total: 1.200 mm, tinggi total: 1.970 mm, kecepatan rotasi (maks.): 1.500 rpm, produsen motor: FPT/Iveco, jenis pendinginan: air, konsumsi bahan bakar (gabungan): 42,1 l/100 km, konsumsi bahan bakar (perkotaan): 24 l/100 km, konsumsi bahan bakar (luar kota): 32,87 l/100 km, bahan bakar: diesel, kapasitas tangki bahan bakar: 600 l, kapasitas baterai: 100 Ah, tegangan baterai: 12 V, tegangan masuk: 12 V, frekuensi input: 50 Hz, arus masuk: 32 A, suhu operasional: 25 °C, suhu lingkungan (min.): -25 °C, suhu lingkungan (maks.): 45 °C, tinggi kabinet kontrol: 1.970 mm, panjang kabinet kontrol: 3.300 mm, lebar kabinet kontrol: 1.200 mm, jenis perlindungan (kode IP): IP65, kecepatan rotasi (min.): 1.500 rpm, suhu: 25 °C, jenis arus masuk: tiga fasa, masa garansi: 12 bulan, Perlengkapan: dokumentasi / manual, tangki solar portabel, The Bredenoord 200 KVA generator is a reliable and versatile solution for both temporary and long-term power requirements across a variety of environments. This genset is ideal for mobile use and complies with Stage V emission regulations. Its efficient FPT/Iveco engine, paired with a Stamford alternator, delivers outstanding performance and low operating costs. The generator is housed in a sound-insulated enclosure that ensures minimal noise emission, making it ideal for use in noise-sensitive environments (super silent). The canopy features thick, oil-resistant acoustic insulation and external sockets with circuit breakers for enhanced safety. With a 600-liter fuel tank, the generator provides up to 14 hours of autonomy at continuous use. The system operates on diesel, HVO, or GTL fuels, offering flexible fueling options. Technical Specifications: - Model: Bredenoord 200 KVA - Nominal output: 220 KVA - Maximum output: 220 KVA - Engine: FPT/Iveco NEF67TM7 - Alternator: Stamford brushless alternator (AVR) - Power: 220 KVA - Voltage: 230/400 V, 50 Hz - Speed: 1500 rpm - Sound level: 68 dB(A) at 7 meters - Fuel tank: 600 liters - Autonomy: - 100% PRP: 14 hours - 70% PRP: 18 hours - Engine power: 160 kW - Battery charger and engine pre-heater: Standard - Control panel: Comap MRS16 (auto start/stop) - Dimensions (L x W x H): 3.30 m x 1.20 m x 1.97 m - Weight: 2409 kg - Emission standard: Stage V Fuel Consumption: - 100% PRP: 42.1 L/h - 70% PRP: 32.87 L/h - 50% PRP: 24 L/h Options: - Engine pre-heating - Battery charger - 3-way fuel valve - XXL fuel tank Sound Attenuation: The generator is engineered with optimized air intakes and specialized insulation materials that minimize noise. The acoustic insulation is reinforced with wool of varying thicknesses to dampen sound across a wide frequency spectrum, making it ideal for deployment in noise-sensitive areas. Durability: The enclosure is corrosion-resistant, featuring a coating tested for over 2,000 hours (C5I-H), ensuring long service life even under the most demanding conditions. Safety: Equipped with reinforced locks and stainless steel hinges, the generator features doors angled at 20 degrees to prevent water accumulation and minimize oxidation. Transport and Handling: The generator is easy to maneuver thanks to reinforced lifting lugs and steel beams, facilitating straightforward transport on construction sites. The design ensures stable and secure relocation without risk of damage. Custom Configuration: The Bredenoord 200 KVA generator is available in various configurations, from 20 KVA up to 600 KVA. Customer-specific adaptations are possible, allowing the generator to be tailored to particular requirements and applications. Certification: - CE-certified - Made in Europe Kdsdpfxowf Nkcj Al Aet Applications: Ideal for use in sectors such as construction, industry, and any field where reliable and efficient power supply is essential.

Kondisi: bekas, Tahun pembuatan: 2005, 3256 CNC Automatic Pallet Production Line Sysmathick RPA9 + Stacker Used, year of manufacture 2005, system already dismantled System for joining wooden components with upper and lower nailing The RPA9 is a machine with circulating chains for producing pallets in standard sizes according to four templates (maximum 1600 x 1400 mm LxW) Operation via touchscreen Format changeover within a few minutes Two programming methods: - Digital programming via PC (input of coordinates) - Manual programming via touchscreen Kedpjx Dddxofx Al Aedt Storage capacity for tens of thousands of products Automatic adjustment of head spacing (minimum 290 mm) Positioning accuracy +/- 1 mm High adjustment speed (1 m/s) Bridge with nine nailers (top: 3x N58 & 3x N400, bottom: 3x N80) High nailing frequency (one row of three nails per second) Nailing of multi-layer pallets possible thanks to heads equipped with pneumatic cylinders Pneumatic clamping of the boards during assembly Minimum pallet size: 600 x 300 mm LxW Maximum pallet size: 1600 x 1400 mm LxW Maximum template size: 1700 x 1600 mm LxW Maximum nailing capacity: 1600 x 1400 mm LxW Maximum pallet height: 190 mm Minimum pallet height: 110 mm Machine output: 60–200 pallets/hour Sale on behalf of client, ex works near 51371 Leverkusen, without dismantling, transport, and installation Dismantling, loading, and transport by us available as an option Subject to errors in description and pricing To avoid misunderstandings, a viewing on site is possible and recommended by prior appointment Sale as-is Technical data, description of condition, year of manufacture, and scope of delivery in accordance with the manufacturer’s brochure or previous owner; subject to confirmation Prior sale reserved For used machines, any warranty is excluded; sold “as inspected” Pictures and videos are examples and may not reflect the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Delivery terms: ex location

Kondisi: baik (bekas), For sale: - Injection molding machine, aggregate, and automatic system for the production of EPS styrofoam mouldings – thermo boxes, fish boxes – used, in very good condition. The machine is currently still connected to the system, facilitating disassembly and clear marking of all connections for the buyer. - Complete machine, ready to be connected to steam installation, EPS granulate transport, electricity, compressed air, and cooling system. - Year of manufacture: 2023 - Configurable mold for the production of styrofoam thermo boxes and fish boxes; 3 sizes, with or without holes, with lid – total 6 configurations. Complete boxes with lids are produced in a single cycle – no need to change molds. - The set includes rights to the box and fishbox designs – full documentation included. NOTE! The machine also enables the production of EPS building mouldings for walls and ceilings – examples shown in one of the photos. We also offer other elements of the production line – check our listings. Other components/devices for sale: - Injection molding machine, aggregate, and automatic system for the production of EPS foundation boards, including mold - EPS pre-expander - Steam system: boiler house and machines Kedpeua Dqiofx Al Ajdt - 3m3 steam tank - Installation for expanded EPS transport - EPS silos - Styrofoam crusher - A wide range of spare parts Additional photos and information available upon request via email. It is possible to purchase individual items separately.