TP-Plus-2: 90

Wittmann

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, 1 used injection moulding machine Gedpeu Eu Tnofx Adgott Manufacturer: ENGEL Model: VICTORY 200/28 TECH Year of manufacture: 2007 Clamping force: 28 tonnes Tie bar spacing: TIE-BAR-LESS Screw diameter: 25 mm Max. shot volume: 49 cm³ Shot weight: 44 g/PS Control system: CC200 Equipment: - 1 x core pull

Kondisi: bekas, nomor mesin/kendaraan: 11666, Rotor diameter: 280 mm Rotor width: 300 mm 3-knife rotor 2 rows of stator knives Feed opening approx. 300 x 280 mm Godpfx Adjghgq Njgett Drive motor 11 kW Equipped with noise protection enclosure, noise reduction hopper, and extraction fan

Tahun pembuatan: 1998, Kondisi: hampir baru (bekas), VAN DAM 568 COM III 8-COLOUR CUP PRINTER 560 COM III 8-colour cup printer, the machine is in good condition. The specifications are listed below. Machine type: Cup printing machine Gtsdpfeh Ha I Esx Adgot Brand: Van Dam Model: 560 COM III Year: 1998 Colours: 8 colours Minimum cup diameter: 63 mm Maximum cup diameter: 203 mm Condition: In good condition If you have any questions about the machine or its specifications, please feel free to contact us at any time.

Kondisi: baik (bekas), Tahun pembuatan: 1988, Operating voltage: 380 V Connected load: 7.5 kVA Dimensions: 2725 x 1930 x 1773 mm Machine weight approx. 2500 kg Technical Data – Main data: Table surface: 605 x 300 mm Max. longitudinal table travel (manual): 750 mm Cross table travel: 340 mm Grinding height (min./max., table to new grinding wheel): 22.5 / 322.5 mm Standard magnetic chuck size: 600 x 300 mm Workpiece weight incl. magnet: 420 kg Gtjdpsw Dvkasfx Adget X-Axis / Longitudinal Travel: T-slots (number x width): 3 x 17 mm Table feed, hydraulic: 0.3 – 25 m/min Travel per handwheel revolution: 47 mm Y-Axis / Vertical Feed: Automatic vertical feed – Coarse, 12 steps: 0.001 – 0.03 mm Automatic vertical feed – Fine, 8 steps: 0.001 – 0.01 mm Travel per handwheel revolution (x1/x10): 0.1 / 1.0 mm Graduation per handwheel division (x1/x10): 0.001 / 0.1 mm Spark-out strokes: 0 – 5 Rapid traverse: 400 mm/min Z-Axis / Cross Travel: Automatic cross feed, intermittent: 0.5 – 20 mm Automatic cross feed / rapid traverse, continuous: 0.1 – 1.0 m/min Travel per handwheel revolution: 5.0 mm Graduation per handwheel division: 0.02 mm Standard grinding wheel: Diameter x width: Ø 355 x 38 (50) mm Bore: Ø 127 mm Speed: 1500 rpm Accessories: various grinding wheels Documentation

Kondisi: baru, nomor mesin/kendaraan: Baureihe GSL 300 / Neumaschine, The granulators of the GSL series 300/400 to 300/800 are primarily designed for the size reduction of production-related scrap material in injection molding and blow molding applications. Gtedsghgbhepfx Adgjt In addition to the key advantages of the GSL series, the slow-running granulators GSL 300/400, GSL 300/600, and GSL 300/800 are particularly suitable for processing large-area components, such as automotive door panels, bumpers, or hollow bodies. The “V-arrangement” of the rotor knives ensures that the pre-shredded material is held at the center of the rotor. This significantly reduces wear on the grinding chamber walls when processing glass fiber-reinforced plastics. Material build-up on the side walls is eliminated. Due to the staggered rotor discs, only individual knives are engaged at any one time, allowing for increased cutting force with each cut.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61037337, gaya penjepit: 800 kN, diameter sekrup: 30 mm, volume langkah: 113 cm³, tekanan injeksi: 2.500 batang, berat injeksi: 103 g, tinggi cetakan (min.): 400 mm, gaya ejektor: 22.600 N, lintasan ejektor: 150 mm, langkah pembukaan: 900 mm, panjang total: 3.960 mm, lebar total: 1.480 mm, tinggi total: 2.020 mm, berat keseluruhan: 3.550 kg, kapasitas pemanasan: 10,9 kW (14,82 hp), jenis penggerak: Hadraulisch, bentang bebas: 470 mm, berat alat: 1.000.000 g,

Kondisi: bekas, nomor mesin/kendaraan: 11629, Rotor diameter: 450 mm Rotor width: 800 mm 5 x 5 blade rotor (offset arrangement) 2 rows of stator blades Feed opening approx. 600 x 800 mm Drive motor: 55 kW Gedpfeghgqasx Adgjtt With soundproof enclosure, mobile

Kondisi: bekas, nomor mesin/kendaraan: 203303A, berat kosong: 5.000 kg, panjang ruang muatan: 11.500 mm, lebar ruang muat: 2.000 mm, Tahun pembuatan: 2011, Perlengkapan: hidrolik, Butt loading ramp, model BK 311550 The Butt loading ramp is the ideal solution for the safe and efficient transport of heavy loads. Hydraulic, height-adjustable, electrically movable. Can also be maneuvered with a forklift. Gtedpfx Adjtt Dayegot Technical specifications: Model: BK 311550 Manufacturer: Butt Roadway width: 200 cm Length: 1150 cm For further details, please refer to the images, type plate, and labels. Condition: Used.

Kondisi: baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 191523, gaya penjepit: 490 kN, diameter sekrup: 30 mm, -KOM 3086- Offered here is a used injection moulding machine. Technical data: Manufacturer: Engel Model: Victory 50 Designation: VC 200/50 Tech Clamping force: 50 t Year of manufacture: 2013 Gtsdpfev Tb U Djx Adget Machine no.: 191523 Screw diameter: 30 mm Tie bar distance: Tie-barless Locating ring diameter: 125 mm

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036940, gaya penjepit: 1.600 kN, diameter sekrup: 50 mm, volume langkah: 393 cm³, tekanan injeksi: 1,892 batang, berat injeksi: 358 g, tinggi cetakan (min.): 200 mm, gaya ejektor: 33.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 950 mm, tinggi pemasangan: 500 mm, panjang total: 5.650 mm, lebar total: 1.820 mm, tinggi total: 1.950 mm, berat keseluruhan: 9.700 kg, kapasitas pemanasan: 15,5 kW (21,07 hp), jenis penggerak: Vollelektrisch, bentang bebas: 570 mm, berat alat: 600.000 g, Injection moulding machines direct from the manufacturer! Gtjdjugfw Depfx Adgot As the manufacturer KraussMaffei, we offer you our inspected and versatile stock machines: The base injection moulding machine, precisionMolding, is the perfect entry-level solution for all-electric injection moulding, allowing you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. The machine is suitable for diverse applications, such as packaging, electrical and electronics industries, medical technology, and automotive sector. Your advantages: – Optimised price-performance ratio for a wide range of applications – High energy efficiency due to the all-electric machine concept – Ability to meet demanding delivery deadlines thanks to a base machine concept with a broad spectrum of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine No.: 61036683, new, YOM 2013) CONTROL SYSTEM ■ MC P1 with 15” TFT colour display, multitouch functionality CLAMPING UNIT ■ Clamping force: kN 1600 ■ Max. mould opening force: kN 120 ■ Clear space (H x V): mm 570 x 520 ■ Mounting platen size (H x V): mm 770 x 720 ■ Mould installation height min. - max.: mm 200 - 500 ■ Max. opening width: mm 950 ■ Max. mould opening stroke: mm 450 ■ Ejector drive: electric ■ Ejector stroke: mm 100 ■ Ejector force fwd/back: kN 33 / 33 ■ Ejector speed fwd/back: mm/s 300 / 300 ■ Max. mould weight: kg 1200 INJECTION UNIT ■ Screw diameter / type: mm 50 / standard ■ Effective L/D ratio: 20.2 ■ Injection pressure: bar 1892 ■ Shot volume: cm³ 393 ■ Shot weight at max. stroke for PS: g 358 ■ Injection speed: mm/s 200 ■ Injection flow rate: cm³/s 393 ■ Screw drive/speed: rpm 267 ■ Plasticising capacity (standard screw): g/s 36.5 ■ Nozzle contact force: kN 42 ELECTRICAL SPECIFICATIONS ■ Connected load: kW 31.2 ■ Installed heating capacity: kW 15.5 ■ Power supply: V / Hz 400 / 50, 3 phases with neutral DIMENSIONS & WEIGHT ■ Net weight incl. electrical cabinet: t 9.7 ■ Length x width x height: m 5.65 x 1.82 x 1.95 ADDITIONAL EQUIPMENT ■ Wear-resistant plasticising unit ■ BluePower full insulation of plasticising cylinder ■ Open nozzle ■ Air valve 1-fold (BWAP) ■ Pneumatic hot runner shut-off control 1-fold ■ Electrical interface for pneumatic cascade 4-fold ■ Euromap handling interfaces E18 + E67 ■ Euromap interface (central computer) E67, E77 ■ Water manifold 4-fold ■ Electrical pre-wiring for hydraulic auxiliary unit ■ Automatic central lubrication ■ Adaptive Process Control (APC) ■ Injection compression moulding circuitry ■ Graphic analysis package ■ Swivelling device for injection unit The machine is located at our facility in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your enquiry.