Trailer tugas berat

WMT D20/8,0 x 2,45

Tahun pembuatan: 2002, Kondisi: diremaj di bengkel (bekas), Beam cutting, drilling, and marking line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122,400 Weight without accessories: 10,980kg - Circular saw with downward cutting motion. - Saw unit with gear system, drive system, and saw blade mounted on a heavy-duty, wear-resistant rotary bearing. - Heavy-duty saw gear with helical, hardened, and ground gearing operating in an oil bath. - Hydraulic saw blade feed, adjustable according to cutting chart, with very rapid return stroke. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return stroke limitation. - Vertical clamping block with self-adjusting pressure plate. - Mitre cutting device for adjusting the angle from 45° left to 35° right. - Material sensor for automatic switch from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport across the saw table. - Economical lubrication system with micro-dosing unit, particularly suitable for cutting profiles. - Chip collector installed on the machine frame. Specifications: - Saw blade housing: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed rate: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting Capacities: 90º Cuts - Angle steel: 250mm - U steel: 400mm - Double-T beam: 600mm - Wide flange beams: 1,008x302mm - Special wide flange beams: 1,000x450mm Mitre Cuts: IPBv beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs beam - 75º: 1,008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122,401 Working Capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U steel (min - max): 80x45mm - 400x110mm - Double-T beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis): 1 unit Hsdpfx Abohzbipevjff - Horizontal (Z and W axes): 2 units Drilling diameter: 8 - 40mm RPM: 150 - 1100 Rapid feed - Rapid return: 3,850mm/min - 8,000mm/min Drilling spindle feed: 0-500mm/min Rapid spindle positioning: 15,000mm/min Automatic tool changer: 5 tools per drilling unit. 3x5 units = 15 total tools Total power: 45KW MARKING UNIT FEED SYSTEM: - 26 meters infeed with beam feeder + 6 side arms for parallel beam feed to roller conveyors - 30 meters with roller conveyors for outfeed + 6 side arms - 4 side arms for small parts - The majority of rollers are powered - The total length required for infeed to outfeed is approximately 60 linear meters. *Please request machine installation layout drawings.

Kondisi: bekas, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of Manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, CNC-controlled Motor power: approx. 30 kW Power supply: 400 Volt, 50 Hz - Backgauge with ELGO positioning control - Backgauge adjustment via ball screw spindles - SICK safety light curtain at the front for operator protection - 3 material support arms with ball rollers - Electric foot switch - Spare blade - Oil cooler with air heat exchanger - Very robust machine in extremely solid design Footprint of base machine (L x W x H): 4650 x 2610 x 3200 mm Hjdpfx Ajd Hxx Ajbveff Weight of base machine: 27,000 kg Transport dimensions (base machine): 4650 x 2610 x 3200 mm Transport dimensions (additional): 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected in storage at 37235 Hessisch Lichtenau, trial cuts possible. Currently, the hold-downs are being resealed, so a corresponding price adjustment will take place in the next few days.

Kondisi: baru, TECHNICAL DATA Type: Gas-heated pass-through chamber furnace Hodog Dgymepfx Abvsff Internal dimensions (W x H x D): 2200 x 2350 x 3000 mm Number of control zones: 2 Max. loading weight: approx. 2.5 t Control system: Siemens S7

Kondisi: baru, en-01 Hjdpexablxjfx Abvoff

Kondisi: baru, Welding current: 15 - 40 A Cutting capacity: 1 - 16 mm Open circuit voltage: 96 V Compressed air connection: min. 4 bar Connected load: 3.6 kW Supply voltage: 230 V Weight: 9.0 kg Dimensions (LxWxH): 371 x 153 x 232 mm Digital display. Overvoltage protection. Plasma torch. Earth cable. Pressure regulator with moisture separator. Equipped with IGBT technology. Hfsdpfx Aboupxfhjvef

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, de Hsdpfx Abewwzudevsff

Kondisi: bekas, Tahun pembuatan: 2010, Pillar slewing crane: mobile Hfedjmt Rpwopfx Abvsf Outreach approx. 2500 mm Machine weight approx. 4 t Load capacity 125 kg Bucket tare weight 430 kg Minimum bucket fill weight 416 kg Minimum total bucket weight 846 kg Max. wheel load 391 kg Max. support load 544 kg Without documents/papers.

Kondisi: baru, Bandsawing machine Manufacturer: METALLKRAFT Model: BMBS 300 x 320 HA-DG Article No.: 3690041 Condition: New machine Cutting range (round): 300 mm Blade speed: 20–100 m/min, steplessly adjustable Standard features: - Fully hydraulic, semi-automatic design: Upon start, the machine clamps automatically; after cutting, it returns to the home position, stops the saw blade, and opens the vice. - Cut sensor for automatic material height detection - Horizontal vice, mechanical, hydraulic - Saw blade tension monitoring, electromechanical - Swarf removal brush - Measuring stop with 1,000 mm scale - Coolant system Hsdeilg Hdspfx Abvsff - Operating manual

Kondisi: baru, en-Bernardo-Drill-Grinding-Machine-DG-32-Pro-Specifications Drill Diameter: 2 – 32 mm Point Angle: 90° - 135° Hfsdpfx Abogd H U Ujvof Rotational Speed: 4,800 rpm Motor Power: 0.25 kW Voltage: 230 V Length: 350 mm Width: 210 mm Height: 305 mm Weight approx.: 32 kg Scope of Delivery • Diamond Grinding Wheel SBC • 10 pcs. ER 20 Collets, 3 – 12 mm (3/4/5/6/7/8/9/10/11/12 mm) • 20 pcs. ER 40 Collets, 13 – 32 mm (13/14/15/16/17/18/19/20/21/22/23/24/25/26/27/28/29/30/31/32 mm) • Collet Holders for ER 20 and ER 40 Features • Includes pointing device for improved centering of the drill tip on the workpiece and reduced feed force required • 30 pcs. ER collets included, also suitable for clamping intermediate sizes • Additional station for back grinding the drill cutting edge (relief angle) • Universally adjustable point angle from 90° to 135° • Rotor with precision ball bearings ensures high running smoothness • Fast and precise results thanks to user-friendly operation • Vibration-free running due to high net weight and rubber feet

Kondisi: bekas, Tahun pembuatan: 2000, With electric height and tilt adjustment Used, top condition, low hours Manufacturer: Altendorf Model: F45 Year of manufacture: 2000 Machine No.: GS-tested Motor: 4 kW Hfodpfx Ajvxlq Hebvsf Steel guides Carriage length: approx. 3000 mm Cutting width: approx. 1050 mm Tiltable up to 45° Scoring unit preparation Parallelogram guard Extension of table Aluminium parts anodised Height adjustment: electric Tilt adjustment: electric Digital display: - Cutting angle - Speed Extraction connection: D 120/80 mm Required space: approx. 3010 mm x 1800 mm x 1500 mm Weight: approx. 1000 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee.