Meja las

WMT P-1200 x 1200

Kondisi: baru, table-specs-2400x1200 Bcodpfjxpxrbsx Ahwew

Kondisi: bekas, Tahun pembuatan: 1999, Payload: 19,990 kg Gross vehicle weight: 8,010 kg Tyre condition front: 70% Tyre condition rear: 70% Bcjdpfxetr H Ens Ahwsw Front tyres: 245/70 R 17.5 Rear tyres: 245/70 R 17.5 Please contact PFEIFER GROUP for further information.

Kondisi: baru, Table length: 1200 mm Bjdpfxjih D Aps Ahwjcw Table width: 800 mm Table height: 840 – 890 mm Machine weight approx. 0.3 t Welding Table / Perforated Table: Hole diameter: 28 mm The table is made of 15 mm thick, high-alloyed steel S355 JR T=15 Surface is untreated. Side panels: 165 mm Height adjustable from approx. 840 – 890 mm Underside is ribbed for reinforcement. Incl. floor mounting Optional accessories available! Surface flatness 0.2 – 0.4 mm over 1000 mm. Table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery.

Kondisi: baru, Table length: 2400 mm Table width: 1200 mm Table height: 850 - 900 mm Bcsdogp Dyqspfx Ahwsw Machine weight: approx. 0.65 t Welding table / perforated table: Hole diameter: 28 mm The table is made from 15 mm thick, high-alloy steel S355 JR T=15. The surface is untreated. Side panels: 165 mm Height adjustable from approx. 880 - 980 mm Underside is ribbed for reinforcement. Including floor mounting. Accessories optional!! Surface flatness: 0.2 - 0.4 mm over 1000 mm. Table can be moved with a pallet truck. Pallet truck not included in the scope of supply!

Kondisi: bekas, Tahun pembuatan: 1986, Sheet thickness 6.0 mm Bsdjg Ip Efopfx Ahwscw Pressure 18 t Shearing angle - upper blade 90° Blade length 225 x 225 mm Operating voltage 380 V Total power requirement 5.5 kW Machine weight approx. 650 kg Required space approx. 1.10 x 0.80 x 1.05 m - Adjustable angle stops

Kondisi: baru, Table length: 2400 mm Table width: 1200 mm Table height: 850 - 900 mm Machine weight: approx. 0.65 t Dimensions (L x W x H): 2.4 x 1.2 x 0.95 m Welding table / perforated table: Hole diameter: 28 mm The table is made of 15 mm thick, high-alloyed steel S355 JR T=15 Surface is untreated. Side panels: 165 mm Bottom side ribbed for reinforcement. Including floor bearings Accessories optional!! Surface flatness: 0.2 - 0.4 mm over 1000 mm. - with drawer unit - grid shelf - heavy-duty swivel casters Bcsdpsu Aw Sbjfx Ahwsw Depicted welding accessories not included in the scope of delivery!!!

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Bcjdsfxyhfepfx Ahwjw Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: baru, Tahun pembuatan: 2024, EX DEMONSTRATION MACHINE ALZMETALL Pillar Drilling Machine ALZSTAR 40 SV with Coolant Device B (Option 25) (consisting of separate tank (33 l), pump with motor protection switch, complete fittings) and LED machine light Standard features: Mushroom emergency stop button, reversing switch (for clockwise and counterclockwise rotation), motor protection switch Stepless speed adjustment, digital speed display, feed overload protection, protection class IP54, plug connector Spindle guard with electrical interlock Technical data: Drilling capacity in steel E335 (St 60): 40 mm Thread cutting: Bcsdpsd Hy Elofx Ahwsw Steel E335 (St 60): M24 Cast iron EN-GJL-200 (GG20): M30 Short spindle taper: MK 3 Spindle stroke: 120 mm Throat depth: 293 mm Column diameter: 115 mm Machine table, usable area: 514 x 360 mm T-slots, number x width x distance: 2 x 14 x 224 mm Distance spindle-table min./max.: 117 / 701 mm Feed: 0.10 + 0.20 mm/rev Machine height without options approx.: 1840 mm Net weight approx.: 285 kg Drive: stepless Motor: 1500 / 3000 rpm Power: 1.45 / 1.9 kW Spindle speed: 160–2250 rpm

Kondisi: baru, Dimensions: 1900 mm length, 810 mm width, 860 mm height. Internal dimensions (LxWxH): 1.5 x 0.74 x 0.78 m. Machine weight approx. 200 kg. Required space approx. 1.9 x 0.81 x 0.86 m. For collecting and disposing of bulk materials and industrial waste. Bcodpfogvqz Ijx Ahwew - Tipping container – forklift attachments for internal storage of bulk materials - Powder-coated in standard colors: RAL 5010 blue, RAL 6011 green, or RAL 7016 anthracite grey; special paint upon request - Tipping mechanism with base plates for swivel and fixed castors - Drainage facility - Sturdy base frame with fork sleeves - Favorable load center - Robust sheet steel construction with reinforced edges Container volume: approx. 600 l

Kondisi: bekas, ALZMETALL AB 4 SV Column Drilling Machine Machine no. 14805 Year of manufacture: approx. 1980 Drilling capacity: 40 mm Bedpfon N Ekcsx Ahwscw Spindle taper: MK 4 - quick quill Throat depth: 340 mm Quill stroke: 180 mm Table size: 710 x 560 mm Column diameter: 160 mm Spindle speed: 30 - 765 rpm, infinitely variable Motor power: 2.3 and 3.4 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - Spindle speed adjustable via 2 motor speeds and stepless variator gearbox - Back gear with 2 transmission stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed rates: 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece mounting surface - LED lighting unit Space requirement (L x W x H): 1200 x 725 x 2050 mm Weight: 615 kg In good condition