Sistem transportasi

WMT Transportfahrwerk 8t

Kondisi: bekas, Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✨✨Buy directly from the manufacturer and benefit from price and quality advantages!✨✨ Take advantage of Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ✅System Components: ►1 pc – Large, gas-heated powder curing oven ►1 pc – Automatic powder coating booth ►1 pc – Small, electrically heated powder curing oven ►2 pcs – Room-type mono-cyclone manual powder coating booths ►6 pcs – Automatic powder coating guns ►3 pcs – Manual powder coating guns ►1 pc – Automatic powder recovery unit ►6 pcs – Mono-cyclones ►1 pc – Automated control panel ►1 pc – Automated bar movement system with speed control ►2 pcs – Mobile platforms with speed control Ncedpfx Ajiivq Uediew ►8 pcs – Parking stations ►300 m – Conveyor rail, 1000 kg capacity ►12 pcs – Suspension bars Our facility is located at Anhaltstr. 30, 14943 Luckenwalde. Please arrange an appointment to inspect the machinery on site. The system has been in operation for 10 years. As the direct manufacturer, we can make the modifications you require to the machines by mutual agreement. Doesn’t fit your existing installation space? We can adapt the layout accordingly. Please check the system PDF using the link below.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, model controller: CADmatic 4 - Professional, This HOLZMA HPP 380 panel saw was manufactured in 2007. It features a robust steel saw carriage, main and scoring saws, as well as a patented central angle return system that reduces cycle time by up to 25%. The machine is equipped with a Power Control CADmatic 4 system, ensuring precise and efficient operation. The saw blade projection is 95 mm, and it operates with a main saw motor of 18.0 kW. For further information on this panel saw, please contact us. Additional Equipment • Air cushion table with roller element 2160 x 650 mm: 4 units • Central blower: 1 unit Machine Advantages Qualitative Machine Advantages • CE-certified, GS-certified, FPH wood dust certified • Partitioning: 75/275/475/1050/1850/2650/3450 mm measured from the angle stop to the center of the gripper Ncedpfxoyaiiys Adiow • 2 additional two-finger grippers possible • 4 manual trimming rakes on grippers • 1 additional single-finger gripper possible • Nozzle spacing of the air cushion tables: 70 x 70 mm Technical Machine Advantages • Trimming saw motor: 2.2 kW • Operating voltage: 400 V / 50 Hz • Electrical connection value for main saw motor: 18.0 kW = 24 kW, 21.0 kW = 27 kW • Positioning accuracy: +/- 0.1 mm/m • Gentle material handling, lifelong positioning accuracy, no lubrication required, high program pusher speed, maintenance-free, full stability of the steel table preserved, simple and cost-effective phenolic resin panel replacement, minimal cylinder wear, consistent pressure application, minimal cut = scoring cut, significant cycle time savings, top cutting quality, minimal setup times, cycle time reduction, adjustable pressing force via electric control • Cutting length: 4300 mm • Cutting width (program pusher travel): 4250 mm • Roller conveyor (10-track element): 1 unit • Roller conveyor (2-track element): 5 units • Grippers: 7 units (first 3 with two fingers, all others with one finger) Additional Information Machine still under power

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, nomor mesin/kendaraan: 0-241-06-5232, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 12.608 h, ketinggian potong (maks.): 125 mm, lebar pemotongan (maks.): 2.200 mm, panjang pemotongan (maks.): 4.300 mm, Panel Saw Holzma HKL11/43/22 Lebar potong maks: 4300 mm Ncsdpfx Aoxfvp Aedisw Panjang potong maks: 2200 mm Tinggi potong maks: 125 mm Mesin gergaji sedang dalam penggunaan terus-menerus, sehingga memungkinkan untuk dilihat saat bekerja. Mesin akan tersedia mulai 02/03/2026.

Kondisi: bekas, Tahun pembuatan: 2008, Daya terpasang: 15 kW Kecepatan pengumpanan: 14 (11) m/menit Ketebalan benda kerja: 8 - 60 mm Ketebalan tepi: 0,4 - 8 mm Pemisahan rol: maks. 3,0 x 45 / 0,8 x 65 mm Diameter ekstraksi: 120 / 160 / 100 mm Tinggi kerja: 950 mm Dimensi: 6260 x 1560 x 2300 mm Berat: sekitar 3000 kg Lokasi penyimpanan: pemasok Njdoy Ruzqspfx Adijcw

Kondisi: bekas, Tahun pembuatan: 1989, Technical details: Drilling capacity in steel (diameter): 28 mm Throat depth: 285 mm Drilling stroke: 165 mm Drilling capacity in cast iron: Ø 35 mm Spindle taper: MT 3 Spindle speed: 65 - 1,750 rpm / 4x stepless Feed: 0.1; 0.2; 0.3 mm/rev manual/automatic Max. distance spindle/table: 80 - 680 mm Table clamping surface: 500 x 370 mm Table rotatable: 360° Drilling table adjustment: 600 mm vertical Column diameter: Ø 130 mm Total power requirement: 7.5 kW Machine weight approx.: 273 kg Machine dimensions (LxWxH) approx.: 0.9 x 0.6 x 1.9 m The machine is capable of thread cutting, with left/right rotation selectable via foot switch and/or depth stop. Njdeu Idkzspfx Adiocw The table is tiltable and height-adjustable.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Brandt KDF 1440 Edition only 1,700 operating hours – excellent condition – can also be supplied with the XES 200 Autark pre-heating station (+ €4,500) OVERVIEW OF UNIT CONFIGURATION: JOINTING MILLING UNIT: 2 x 2.2 kW 200 Hz GLUING UNIT: QA 65 N END TRIMMING UNIT, BEVEL/STRAIGHT: 2 x 0.18 kW PNEUMATIC ADJUSTMENT FOR END TRIMMING, BEVEL/STRAIGHT MULTI-STAGE MILLING UNIT: MS 40 (counter-rotation) PNEUMATIC TWO-POINT ADJUSTMENT PROFILE MILLING UNIT: 1 x 0.35 kW WD 60 (suitable for construction flooring) PNEUMATIC TWO-POINT ADJUSTMENT FOR RADIUS/BEVEL MULTI-STAGE SCRAPER UNIT: MZ 40 GLUE JOINT SCRAPER BUFFING UNIT Top pressure: PU rollers instead of standard rollers Additional QA 65 N gluing unit (interchangeable) Release agent spraying unit for workpiece Automatic edge feed Multiple roller tracing for multi-stage milling unit MS 40 + multi-stage scraper MZ 40 Cleaning agent spraying unit WORKPIECE AND EDGE PARAMETERS: – Minimum workpiece width: – For workpiece thickness 8–22 mm: 70 mm* – For workpiece thickness 23–40 mm: 120 mm* – For workpiece thickness 41–60 mm: 150 mm* *depending on workpiece length – Workpiece overhang: 38 mm – Workpiece thickness: 8–60 mm – Maximum edge height = workpiece height + 6 mm – Edge material (coil): 0.4–3 mm – Max. edge cross-section: – For PVC: 135 mm² – For veneer: 100 mm² Nodpfxszb Iggs Adiecw – Max. coil diameter: 830 mm – Edge material (strips): 0.4–8 mm – Max. edge cross-section for strips: 360 mm² – Feed speed: 8–14 m/min – Maximum feed speed with profile milling: 11 m/min – Working height: 950 mm – Pneumatic connection: min. 6 bar – Total length: 5,573 mm Complete description: see PDF

Kondisi: bekas, Tahun pembuatan: 2022, panjang total: 8.000 mm, lebar total: 2.400 mm, tinggi total: 2.400 mm, T0001 Ncsdpfx Aoy E Hdgedisw

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Panel Dividing System PA 4115 – 3100 x 3100 DNC-AT Condition: completely overhauled Warranty: 1-year guarantee Technical Specifications: Left-side adjustable angle stop according to AGA 4383 Ncsdpfsxhg Ibox Adisw Longitudinal Panel Saw FM 16-3100: - Hardened guides - Automatic forward and return travel of the saw unit - Return travel with automatic lowering - Feed speed: 2–50 m/min (stepless via potentiometer) - Return speed: 70 m/min (rapid traverse) - Integrated extraction channels in machine base and pressure beam - Scoring saw adjustable from outside (no need to open safety cover) Saw Unit with Regulated DC Drive: - Precise positioning (e.g. for cut-outs) - Slowed immersion exit from the cut - Includes safety cover interlock, lamella curtain SZ 5008 - Offcut device SP 5004 – offcuts down to min. 5 mm - Main saw motor: 7.0 kW - Scoring saw motor: 1.1 kW (individually switchable) - Cutting length: 3100 mm - Cutting height: 70 mm - Dust tested: threshold value of 2 mg/m³ significantly undercut - CE compliant Angle Pressure Device WP 5003: - With pressure claw for cross cuts - Adjustment range up to 2400 mm - Semi-automatic function Material Feed Table HP 5021 (mounted at rear of FM 16): - Parallel fence with 6 spring-loaded clamping fingers - Direct drive of material pusher by servomotor - Table surface closed with Pertinax plates (suitable for narrow strips) - Feed speed: 25 m/min (safety restricted) - Return speed: 40 m/min - Table length: 3100 mm - Fence depth: 3100 mm Multi-microprocessor control - Integrated PC with hard drive - Operating system: LINUX - Interfaces: serial + parallel, USB - Network connectivity (including wireless LAN) - Optimize cutting plans in the office and send directly to machine - Multitasking capable - Print function via USB - Remote maintenance via Internet (Remote Desktop, TeamViewer) - Multilingual dialog programming - 15” flat screen + multifunction keyboard - Swiveling control panel - Graphical display of cutting plans and workflows Additional Features: Angle stop table HP 5043 (front-mounted): - Machined steel angle, Pertinax table support - Table size: 1800 × 800 mm Workpiece support table HP 5025 (front-mounted): - Pertinax support - Table size: 1800 × 800 mm Air cushion device LK 5030 - Integrated into HP 5043 and HP 5025 Accessories: - 1 circular saw blade KSB 4005 – Ø 305 mm, Z=60 (for main saw) - 1 circular saw blade KSB 4006 – Ø 200 mm, Z=60 conical (for scoring saw)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1986, Kép panjang penggerindaan 800 mm Ncjdpfjunt Iuex Adiow Kép lebar penggerindaan 375 mm Ketinggian benda kerja 375 mm Pelat jepit magnetik elektrik 900 x 300 mm Kecepatan putar spindle 1500 - 3000 rpm Luas meja jepit 1550 x 370 mm Perjalanan memanjang meja 100 - 1000 mm Berat maksimum benda kerja 350 kg Ukuran batu gerinda 300 x 50 mm Kebutuhan daya total 9 kW Berat mesin sekitar 4,6 t Kebutuhan ruang sekitar 4,0 x 2,3 x 2,6 m Perangkat penggerindaan basah, pengaturan vertikal otomatis. Dapat dialihkan antara penggerindaan celah dan penggerindaan bidang. Perangkat pendresan lurus elektrik Pelat magnetik elektrik 900 x 300

Kondisi: baik (bekas), Tahun pembuatan: 2013, Profile processing center Axes travel paths X-axis: 7430 mm Y-axis: 1320 mm Z-axis: 500 mm A-axis: +/-90° Working areas X-axis: 7460 mm Y-axis: 650 mm Z-axis: 250 mm 8 clamping elements Automatic tool magazine with 8 slots in a protected housing, suitable for drilling, milling, and tapping tools, angle heads and disc cutters, max. Ø 200 mm, plus 2 slots for 2 angle heads Ncodpfovy E Ibox Adiow Tool holder: ISO 30 In pendulum operation (2-zone machining), the working stroke per zone is limited to 3500 mm.