Mesin pembentuk - Vertikal

WMW MEUSELWITZ STSR400

Kondisi: sangat baik (bekas), Tahun pembuatan: 1977, Grinding diameter: 350 mm Gsdpfxeunt Eyj Adtjbg Grinding length: 1000 mm Centre height: 100 mm Grinding wheel diameter: 360 mm Total power requirement: kW Machine weight approx. 3.8 t Space requirement approx. 3.5 x 1.3 x 1.5 m Machine in very good condition! External and internal spindle. Extensive accessories included.

Kondisi: sangat baik (bekas), Here we offer a Polychromix Phazir NIR spectrometer. Portable near-infrared analyzer Model: 1624 Specifications Spectral range: 1600-2400 nm Pixel pitch: 8 nm Optical resolution: 11 nm Stray light Gbodpfen Arm Tex Adtjg

Kondisi: bekas, Swing diameter over bed: 2400 mm Swing diameter over support: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Gbsdpfxsxddvnj Adtjg Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm With special jaws up to 2050 mm Clamping diameter in tailstock faceplate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speed, infinitely variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center angle: 70° Supports Travel of grooving slide: 500 mm Travel of cross slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, cross: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, cross: 0.3 - 120 mm/min Maximum cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Clamping diameter of faceplate: 1400 mm Flange center angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying device for first support: Copying length: 8500 mm Max. copying depth in a single pass: 500 mm Boring attachment: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one pass: 2700 mm For K_s of 200 kp/mm² - s_max = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rail for taper turning, adjustment angle up to 8° and a maximum taper length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide rail for taper turning, adjustment angle up to 15° and a maximum taper length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle housing.

Kondisi: bekas, Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 3.000 mm, diameter putar di atas sled silang: 520 mm, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 150 mm, jarak gerak sumbu Z: 3.150 mm, Diameter pembubutan 520 mm Panjang pembubutan 3000 mm Kontrol SIN 840 D Siemens Sumbu z 3150 mm Feed sumbu z 1 - 40.000 mm / mnt Gerak rapid Z-axis 40,00 m/mnt Sumbu x 600 mm Feed sumbu x 1 - 30.000 mm/mnt Gerak rapid X-axis 30,00 m/mnt Spindel utama S1 Kisaran kecepatan spindel 1 - 3.300 rpm Daya penggerak pada beban 100% 29,00 kW Kepala spindel DIN 55026 - Ukuran A11 Diameter spindel pada bantalan depan 160 mm Lubang spindel 115 mm Sumbu C 360 x 0,001° Spindel milling S2 Pemegang alat Capto C6 Kisaran kecepatan tanpa tingkat 1 - 6.000 rpm Sumbu y -100 / +150 mm Sumbu B -110 / +110° Majalah alat dengan 100 tempat Kebutuhan daya total 145 kW Berat mesin sekitar 24 t Gjdpfx Adoxadk Detebg

Kondisi: bekas, Technical details: Maximum ram stroke: 250 mm Maximum workpiece diameter: 80 mm Maximum workpiece length: 900 mm Godpfew Au I Ijx Adtsbg Total power requirement: 1.5 kW Approx. machine weight: 2.1 t Various accessories *

Kondisi: bekas, Tahun pembuatan: 1996, Grinding length: 600 mm Grinding width: 250 mm Workpiece height approx. 385 mm Clamping surface of table: 600 x 200 mm Table speed - stepless: 2 - 35 m/min Maximum table load: 250 kg Grinding wheel dimensions: ø 225 x 25 mm Grinding wheel bore: 50.8 mm Vertical feed, automatic: 0.001 - 0.099 mm Rapid vertical traverse: 600 mm/min Table cross feed, continuous: 10 - 1000 mm/min Rapid cross traverse: 1000 mm/min Total power requirement: 6 kVA Machine dimensions L x W x H: 2.65 x 1.70 x 2.28 m Accessories: Digital readout on Y and Z axes, magnetic chuck 600 x 200 mm, grinding wheel with flange, wheel dressing device, wet grinding system with paper band filter. Gjdpfx Adjt Tqrnjtebg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: MGB1320E, tinggi pusat: 180 mm, berat benda kerja (maks.): 100 kg, panjang penggilingan: 500 mm, diameter roda gerinda: 400 mm, lebar total: 14.150 mm, panjang total: 18.000 mm, tinggi total: 14.750 mm, diameter penggilingan: 320 mm, panjang benda kerja di antara senter: 350 mm, lebar roda gerinda: 50 mm, kecepatan spindel (maks.): 3.000 rpm, panjang pemakanan sumbu X: 500 mm, panjang umpan sumbu Z: 150 mm, kecepatan pemakanan sumbu X: 10 m/menit, laju pemakanan sumbu Z: 1 m/menit, berat keseluruhan: 2.100 kg, kecepatan maksimum spindel benda kerja: 400 rpm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Beijing No.2 Machine Tool (BEIER) Semi-automatic High-speed External Cylindrical Grinding Machine MBS1320E Gsdpfjtr Azkox Adtsbg Online production equipment; machine testing available; roundness within 0.001 mm Manufacturer: BEIER MACHINE TOOL WORKS CO LTD

Kondisi: sangat baik (bekas), Tahun pembuatan: 1981, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: 1 pengumpan luncur kanan Gsdor D N Eqepfx Adtobg 1 press eksentrik 250 kN 4 unit luncur normal 1 unit luncur sempit Ruang kerja: Diameter kawat: hingga 6,0 mm Lebar pita: hingga 80 mm Panjang penarikan: hingga 520 mm Kapasitas: 10 - 250/menit.

Kondisi: sangat baik (bekas), Grinding range 650 x 300 x 550 mm Table size 650 x 250 mm Gbodpfxsrvhire Adtog Automatic dressing device MARCELS MASCHINEN CH

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut per lengan kantilever: 500 kg, tinggi rak: 3.200 mm, panjang total: 2.100 mm, tinggi total: 3.200 mm, jarak gandar: 1.000 mm, kapasitas beban per penyangga: 2.500 kg, Cantilever racking, hot-dip galvanized design: Scope of delivery: - 3 rack uprights, height 3.2 m, with base section, 1.8 m usable depth (total depth 2 m) - 12 cantilever arms with 1.8 m usable depth (for chipboards approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing: 1.3 m) - Fastening materials (bolts, nuts, and washers) Net price: €2,490.00 plus VAT Detailed description: - Robust steel structure made from IPE sections (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms: 1,800 mm usable depth - (For chipboard panels up to 2,100 mm deep) - Cantilever arms are height-adjustable in 100 mm increments - Each upright fitted with 4 bolted cantilever arms as standard (= 5 storage levels) Gbodpfxeqt Dmye Adtjg - Load capacity per arm: 500 kg - Including longitudinal and diagonal braces for 1,000 mm upright spacing - Rack length: 2,100 mm - Inclusive of fastening material (without floor anchors) - Includes assembly instructions and C4 load labels in accordance with DIN standards - Made in Germany - Short delivery times Our cantilever racks are manufactured exclusively in Germany. We provide reliable transport with advance delivery notification. The material is sensibly packaged to facilitate easy unloading. Delivery for stock items can be made approx. 1 week after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixing, and able to support the required loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to professional industry guidelines, it is recommended that the uprights have a minimum 500 mm projection above the top storage level.