Tekan kolom tunggal - hidrolik

WMW ZEULENRODA PYE 10

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: Duodpfefxyhfsx Aftop The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Tahun pembuatan: 2007, Kondisi: sangat baik (bekas), Inline-can-/Dosen-/Gläserwaschmaschine und Trockner Duedpfx Afeh Eazzotsp Komplett aus Edelstahl gefertigt Für Behälter bis maximal 180 mm Breite und 250 mm Höhe Im Ist-Zustand verfügbar oder Geprüft und nach Kundenspezifikation angepasst

Kondisi: hampir baru (bekas), Tahun pembuatan: 2014, jam operasional: 15.000 h, Tahap kompresor Atlas Copco setelah direkondisi. Djdpfemzbdwex Aftsup

Kondisi: bekas, Tahun pembuatan: 2021, jenis bahan bakar: diesel, produsen motor: C32, Purpose of use: Construction industry Unladen weight: 18,221 kg Generator output: 1,100 kVA Transport dimensions (L x W x H): 20 ft HC container Please contact the Sales Department for further information. Djdpfxsvyn A Ue Aftoup Over 85 years of sales experience in the Netherlands. An expert team dedicated to finding tailored solutions for your needs. 1,000 operating hours or 1-year warranty: maximum peace of mind. Available 24/7. Fast service. Large stock, immediately available.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1975, -KOM 1002- Offered here is a press by HYDRAP, model HKPS8000. Technical data: Model: HKPS8000 Year of manufacture: 1975 Usable stroke: 200 mm Throat depth: 250 mm (center) Table size: 320 x 320 mm Installation height: approx. 345 mm Voltage: 380V Permissible load: 80,000 N Drive type: Hydraulic Drive power: 1.5 kW Dsdpfx Afog Ufvbotsup Oil capacity: 60 l Oil viscosity: 3°E With your purchase, you will receive a proper invoice with VAT shown separately. We have many more interesting items for sale. Feel free to check out all our listings. If you are interested or have any questions, please contact us via the messaging function!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), kapasitas pendinginan: 56 kW (76,14 hp), jenis pendinginan: air, frekuensi input: 50 Hz, kapasitas pemanasan: 67 kW (91,09 hp), jenis bahan bakar: gas, "SANYO" PANASONIC ECO G gas heat pump air conditioning unit Model: SGP-E190J2GU2W Engine: Nissan FY5 Power supply: 230 V AC, 1 phase, 50 Hz Maximum electrical power: 1.16 kW, 5.4 A (continuous operation) Device protection rating: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Heat input (HS) (cooling): 43.5 kW Heat input (HS) (heating): 46 kW Refrigerant: R407C, 17 kg Design pressure (high side): 30 bar Duodpfxjd Tiu Es Aftsp Design pressure (low side): 16 bar FOR OUTDOOR USE ONLY! We have 4 units in stock!

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1999, berat keseluruhan: 22.800 kg, gaya penekanan: 250 t, CNC press brake Manufacturer: Weinbrenner Model: GP250 Machine specifications: - Crowning system Dedpfxor Sxq Rj Aftsup - Die shifting - Rear stop type 2 - Front bending aid (disassembled for transport) - DNC 900PS CNC control All documentation for the machine is available.

Kondisi: bekas, Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 1.200 mm, Mazak Quick Turn Nexus 350M Pusat Bubut CNC dengan Kontrol CNC Mazatrol 640T Nexus Tahun pembuatan: 2004.11 Panjang pembubutan: 1.200 mm Diameter ayun maksimum: 750 mm Diameter pemesinan standar: 336 mm Diameter pemesinan maksimum: 420 mm Lubang batang: 102 mm Kecepatan spindle maksimal: 4.000 rpm Revolver alat 12 posisi Chuck Kitagawa 3-jaw bertenaga, 12 inci Tailstock Djdpfxjx Dccye Aftoup Berat mesin: 7.500 kg Termasuk berbagai holder alat pada revolver, 4x holder alat bertenaga, dan aksesoris lainnya. Aksesoris: 4x alat bertenaga Holder alat Mazak Konveyor serbuk/serutan

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Pressing force: 100 t Bending length: 2250 mm Distance between uprights: 2050 mm Ram stroke: 275 mm Clearance between upper and lower beams: 410 mm Frame throat: 300 mm X-axis travel, CNC programmable: 550 mm Z1+Z2 axis travel, CNC programmable/manual, 4 stop fingers: mm R-axis travel, CNC programmable: 130 mm Approach speed: 100 mm/sec Bending speed: 0–10 mm/sec Opening speed: 100 mm/sec Operating hours: 13,000 h Length: 3500 mm Width: 2000 mm Height: 2600 mm Dodpfevzcm Djx Aftoup Weight: 5700 kg Total power requirement: 9 kW Space requirement approx. 4x2x2.7 m All machines can be inspected under power at any time. Machine demonstrations possible at any time. Front safety light barrier, motorized adjustment Fissler Rear Sick light barrier safety Manual crowning Promecam tool holders

Kondisi: bekas, Scrubber dryer, floor cleaning machine, sweeper - Handover in as-is condition as inspected - Machine is without battery, brush, and squeegee - Working width: 500 mm - Charger - Quantity: 1 unit available - Dimensions: 1150/520/H950 mm Djdec R S E Sepfx Aftoup - Weight without battery: 66 kg