Mesin press kolom tunggal - Hidrolik - Mesin press pelurus

WMW Zeulenroda PYTE 2.5x150

Kondisi: bekas, Technical details: Pressing force: 2.3 t Stroke: 280 mm Throat depth: 155 mm Ram stroke - max.: Forward: 0.08 m/sec Shut height with bolster plate/ram up: 355 mm Distance table/ram: max. 355 mm Clamping plate on table: 280 x 280 mm Through-hole in table: Ø 100 mm Ram speed forward: 0.08 m/s Ram speed return: 0.32 m/s Taper hole in ram: Ø 20 x 45 mm Height above floor: 725 mm Total power requirement: 1.1 kW Machine weight approx.: 0.5 t Machine dimensions (LxWxH): approx. 0.6 x 0.7 x 1.6 m Press with mechanical 2-hand operation. Pressure test performed up to 2.3 t. Kdsdpfxou Nfwle Aaysw Good condition.

Kondisi: bekas,

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: Ksdpfx Asfxyhfoayjdw - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Tahun pembuatan: 1985, Kondisi: diremaj di bengkel (bekas), REFORM Type AR 10 Model 40H Face Grinding Machine Year of manufacture: 1985 30 kW grinding motor Modicon control system 6-stage magnetic control Magnet size: 1000 mm x 300 mm Segment head diameter: 460 mm Segment dimensions: 90 x 38 x 180 mm Number of segments: 1 set = 8 pcs Grinding motor infeed: infinitely adjustable from 0.01 mm to 0.1 mm Kdjdpfod E Np Esx Aayew Hydraulic oscillation drive New supply cables between machine and control cabinet

Tahun pembuatan: 1988, Kondisi: bekas,

Kondisi: bekas, Tahun pembuatan: 1981, nomor mesin/kendaraan: 9, Case Press and Joint Setting Machine Schmedt PräForm HHS 20 Year of manufacture: 02/1981 – Serial No.: 09 Book height: 100 – 520 mm Block width: 120 – 400 mm Block thickness: 8 – 100 mm Output: approx. 150 cycles/hour Compressed air supply: 6 bar Electrical connection: 230 V / 50 Hz / 2.0 kW Online video inspection via Skype video available. We would be pleased to welcome your visit – more machines in stock. Available immediately – inspections possible. Kjdpfermul Dex Aaysdw Located in Emskirchen/Nuremberg – testing possible on site.

Tahun pembuatan: 2023, Kondisi: baru, Veneer Press OMC PL 105 LC 30/13 Water-Based Working area: 3000x1300 mm Opening width: 400 mm Kdodjiypzlspfx Aayew 6 cylinders, diameter 85 mm Total pressure: 105T Maximum heating temperature: 85°C Logic control system Machine operation via touch panel Readouts: temperature, pressing force, shelf opening time, loading area calculator, adhesive process programming Power: 21 kW CE certificate Year of manufacture: 2023 Machine available on order Brand new machine

Kondisi: bekas, nomor mesin/kendaraan: 24599,

Tahun pembuatan: 1988, Kondisi: bekas, nomor mesin/kendaraan: 8829-III, Maximum temperature: Preheating/Hardening chamber 1000/1350 °C Electrical connection: 380 V kW Ksdpfxs Rxa Nj Aayjdw Required space: 1150 x 1500 x 1840 mm Total weight: approx. 900 kg Heating capacity: Preheating/Hardening chamber 9/25 kW

Tahun pembuatan: 1984, Kondisi: bekas, Printing machine, embossing machine, stamping machine - Non-functional, control unit: defective Kodpfxod Hp Tze Aayedw - Pneumatic-hydraulic press - Stroke: 50 mm - Clear column distance: 850 mm - Table area: 400 x 370 mm - Dimensions: 1285/590/H1820 mm - Weight: 416 kg