Bubut belakang

WMW DH 250III x630

Kondisi: bekas, Tahun pembuatan: 1979, Technical Details: Swing diameter over bed: 540 mm Turning length: 630 mm Distance between centers: 900 mm Center height over bed: 270 mm Center height over sub-slide: 138 mm Swing diameter over sub-slide: 250 mm Longitudinal travel: 700 mm Cross travel: 80 / 75 mm Spindle speeds: 1.8 - 450 rpm, 8-step, stepless Ksdpfxjvbhv Rj Agljwt Clamping diameter: 26 mm Feed range X-axis: 12 steps / 0.063 - 0.63 mm/rev Feed range Y-axis: 36 steps / 0.070 - 1.11 mm/rev Tailstock quill: MK5 Tailstock quill stroke: 250 mm Total power requirement: 7.0 kW Machine weight approx.: 3.76 t Machine dimensions approx. (LxWxH): 3.2 x 1.2 x 1.8 m Application: Primarily used for back-turning and relief grinding of cutting tools (especially hobbing cutters with and without thread pitches). Back-turning and relief grinding can be performed from the front, rear, and along the machine axis. Main drive through an 8-speed manual gearbox. Feed gearbox is a 12-speed manual gearbox. Swivel range of sub-slide = 360° Swivel range of cross-slide = 360° Chuck is a cone plate Ø 200 mm with MK5 Equipment: Mandrel Ø 49.5 x 400 mm ARBAH-L 3+1 measuring system FRENIC 5000G11 inverter 3-jaw chuck Ø 250 mm in good condition.

Kondisi: bekas, Tahun pembuatan: 2001, en-001 Kwsdpforw Dknjx Aglst

Kondisi: diremajakan ulang (bekas), Bett mit Aussparung Spitzenweite: 2.540 mm (100") Umlaufdurchmesser über Bett: 560 mm (22") Spindeldrehzahlen: 18 – 1.400 U/min Spindelbohrung: 89 mm (3 1/2") Spannfutteraufnahme: D1 – 11 Reitstockkegel: MK 5 Kwsdpfx Ajwga Eysglst Ausführung: Wird noch bekanntgegeben Schnellwechsel-Werkzeughalter mit 4 Haltern & Schlüsseln 4-Backenfutter mit standardmäßigem Futter-Schutz Kühlmitteleinrichtung und Lovo-Arbeitsleuchte Feststehende Lünette

Tahun pembuatan: 1990, Kondisi: baik (bekas), nomor mesin/kendaraan: 92041, Table clamping surface: 410 x 900 mm Travel (X/Y/Z): 560 / 410 / 380 mm Spindle taper: SK 40 Spindle speeds: 22 - 6000 rpm Kodpedhhprsfx Aglswt Feed rates: X and Z up to 10,000 mm/min, Y up to 240 mm/min Required floor space: 2,600 x 2,000 x 2,300 mm Weight: 3,500 kg

Kondisi: bekas, Tahun pembuatan: 2008, Vertical Turning and Grinding Center Manufacturer: EMAG Model: VSC 250 DS Year of manufacture: 2008 Control system: SIEMENS 840D Grinding spindle speed: 30,000 rpm Kjdsia Rtdopfx Aglswt Turning spindle speed: 3,000 rpm Turret tool stations: 12 Chiller unit for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling Air through spindle Two clamping circuits through spindle (air and oil) Please note: The grinding spindle is defective but can be overhauled at a spindle repair facility. Apart from that, the machine is in very good condition and fully functional. Please contact us for further information and pictures via mail(at) or *

Tahun pembuatan: 1987, Kondisi: siap digunakan (bekas), Translation: Ksdpfx Agorgahxelswt Centre distance: 400–800 mm, Spindle speed: 1000–2700 rpm, Workpiece diameter: 10–300 mm, Grinding wheel diameter: 40–300 mm, Swivel angle: -45 to +45°, Length: 3000 mm, Width: 2500 mm, Height: 2275 mm; equipped with Hoffmann oil mist separator (new filter cartridges), Faudi gravity band filter unit, hydraulic power unit, additional grinding head for grinding worm gears, grinding arbors with diameters 50, 40, 27, 22 mm, holders for SK40 and MK5, driver sets for various clamping diameters, operating manual, electrical diagrams in paper format. Inspection possible.

Tahun pembuatan: 1969, Kondisi: siap digunakan (bekas), Max. grinding depth: 80 mm, spindle-to-table distance: 145 mm, spindle bore: 28 mm, connected load: 7 kW, length: 2,100 mm, width: 1,400 mm, height: 950 mm, weight: 1.6 t, with documentation. An on-site inspection is possible. Kwodpfoqzkdmjx Agljt

Kondisi: bekas, TECHNICAL DATA - Number of axes: 5 MILLING SPINDLE - Tool holder: HSK63 - Spindle drive power: 17.5 kW Kwsdpfeup Hwxjx Aglet - Spindle speed: 18,000 rpm LINEAR AXES - Travel range X/Y/Z axes: 915 / 500 / 500 mm - Rapid traverse speed (X/Y/Z): 30 / 30 / 20 m/min TOOL CHANGER - Number of tools in magazine: 28 TABLE - Table size: Ø 630 mm - Max. table load: 500 kg ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 26 kVA WEIGHT AND DIMENSIONS - Footprint: 3620 x 3160 mm - Machine height: 3000 mm - Machine weight: 7300 kg MACHINE HOURS - Operating hours: 50223 h EQUIPMENT - Control: Heidenhain iTNC 530 - Coolant tank - Chip conveyor - Oil mist extraction: ELBARON - Coolant unit: HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probing system: Renishaw - Tool breakage monitoring: BLUM

Kondisi: bekas, Tahun pembuatan: 1995, diameter pembubutan di atas alas geser: 500 mm, Universal lathe Manufacturer: ZMM Type 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Type: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing diameter over bed: 500 mm Spindle bore: 73 mm Dimensions: L 2.7 x W 1.2 x H 1.8 m Weight approx.: 3100 kg Equipment Ksdpfowudhusx Aglewt • 3-jaw chuck Röhm ZS 350 mm • Quick-change tool holder • Rotating centre • Coolant pump • Machine lamp All details without guarantee. A demonstration under power is possible at any time in our showroom.

Kondisi: bekas, Tahun pembuatan: 1952, Technical Details: Swing diameter over bed: 1000 mm Swing diameter over cross slide: 520 mm Turning length: 2500 mm Cross slide travel Z-axis, flat: approx. 500 mm Kwodpfx Agju Tq U Ijlst Cross slide travel Z-axis, top slide: approx. 300 mm Center height: 300 mm Spindle bore: 90 mm Speed range: 3.2 - 382 / 22 steps rpm Feed range X-axis: longitudinal: 0.213 - 2.67 / 36 steps m/min Feed range Y-axis: cross: 0.070 - 1.11 / 36 steps m/min Tailstock quill taper: MK 6 Total power requirement: 22 kW Machine weight approx.: 8.2 t Machine dimensions approx. LxWxH: 5.3 x 1.6 x 1.6 m Transport dimensions approx.: 5.5 x 1.7 x 1.6 m Equipment: Face plate Ø 1000 mm 4-way toolpost Steady rest Ø 250 closed Accessories: Four-jaw chuck Ø 630 mm