Exzenterpresse - Doppelständer

WMW-ERFURT PED 100/2

Kondisi: bekas, eccentric-press-automat-haulick-roos-type-rvd-125-double-column- eccentric-press-serial-no-212560-year-1981-pressing-force-125-ton s-table-size-880-x-800-mm-table-opening-470-x-140-mm-frame-width- 900-mm-side-frame-width-415-mm-ram-stroke-45-mm-ram-adjustment-ra nge-0-80-mm-installation-height-as-shown-340-mm-strokes-per-minut e-50-to-300-main-drive-motor-power-22-kw-power-supply-380-volt-50 -hz-double-connecting-rod-drive-mechanism-with-4-fold-mounted-ecc entric-shaft-for-off-center-ram-load-side-mounted-control-cabinet -nc-roll-feeder-ebu-width-250-mm-year-2003-standalone-control-pan el-for-roll-feeder-strip-feed-direction-left-to-right-space-requi rements-press-l-x-w-x-h-3000-x-2000-x-3020-mm-transport-height-29 50-mm-weight-of-press-approx-11-tons Laodpfxohlnzko Aahjk

Kondisi: bekas, Double-column eccentric stamping press BLEMA Gotha Type PEZ 160-50 MHSY-ES Eccentric press with roller feed ALBA Machine No. 88151005 Year of manufacture 1988 / 92 Pressing force: 160 tons Frame width: 970 mm Frame width lateral: 560 mm Table size: 900 x 900 mm Ram surface: 900 x 700 mm Tool installation height: 560 mm, max. 700 mm Stroke adjustment: 8–160 mm Ram adjustment travel: 125 mm Strokes: 25 to 70 strokes/min. Strip width in roller feed: max. 400 mm Motor power: approx. 15 kW Mains connection: 380 Volt, 50 Hz - Infinitely variable stroke rate via frequency control - Automatic stroke adjustment - Ram weight counterbalance cylinder with compressed air - Hydraulic overload protection in the ram - Pneumatic clutch-brake combination - Centralized oil lubrication - Precisely guided press ram with oil-lubricated guides - UNIDOR press control - Swiveling control panel - Control cabinets for press and feed unit, mounted together on a platform adjacent to the machine Platform dimensions: 3400 x 2250 mm, height without feet 2950 mm Width of the press without feed: 2100 mm Depth of the press with drive motor: 2300 mm Overall height of the press: 4150 mm Laodpjdzqlvsfx Aahek Net weight of stamping press: approx. 18 tons For transport, the drive motor is dismantled and the machine is laid on its side. Included: NC roller feed-straightening machine ALBA Type GGVHY400 Unit Nos. 1405 and 1406, Order No. 910708 (Year of manufacture 1992) - Feed control ALBA PSS 300 - Feed length infinitely programmable from 0.1 to 6500 mm per stroke - Strip thickness at 400 mm width max. 3 mm - Strip thickness at 300 mm width max. 4 mm - Strip cross section max. 1200 mm² - Roller drive of the feed hydraulically controlled - Height-adjustable feed unit on press for adapting material entry height - Adjacent hydraulic unit - Drag straightener with hydraulic opening and closing Weight of complete system: approx. 24 tons Space required for transport: one mega trailer with 3 meter internal height and 13.6 meter loading length Good condition

Tahun pembuatan: 2020, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, SELMI Roaster 120 Coffee Roaster Year of manufacture: 2020 Technical condition: very good Technical specifications: - Width: 970 mm - Depth: 1710 mm - Height: 2040 mm - Roasting method: vertiflow® system - Batch size: 20/25 kg - Coffee roasting time: 15-16 min Lasdpfxsvil Rhs Aahjk - Power: 35 kW - Power supply: 400 V

Kondisi: baik (bekas), Pabrikan: WEINGARTEN Tipe: ER 125 Ukuran meja: 800x620 mm Ledpfx Aajn D Ebashoak Terdapat retakan kecil yang terlihat pada bagian penahan beban mesin press; mesin telah digunakan seperti ini selama bertahun-tahun. !!

Kondisi: bekas, Tahun pembuatan: 1989, Presskraft 250 t Hub 20 - 190 mm Hubzahl 24 / 48 Hübe/min Ausladung 500 mm Durchgang zwischen den Seitenwänden 1000 mm Einbauhöhe 615 mm Tischfläche 1400 x 880 mm Durchfallöffnung im Tisch 450/500 mm Tischhöhe über Boden 800 mm Stößelfläche 1380 x 620 mm Laodpfx Asvut Nceahsk Stößelverstellung 125 mm Antriebsleistung 29,0 kW Gewicht 27,0 t Platzbedarf ca. 2,0 x 2,6 x 4,1 m (LxBxH) Für Handbeladung gemäß deutschen Unfallverhütungsvorschriften (UVV) zugelassen. Ausstattung: polumschaltbarer Motor, pneumatische Kupplungs-/Bremskombination, hydraulische Überlastsicherung im Stößel, pneumatischer Stößelgewichtsausgleich, motorische Stößelverstellung, halbautomatische Hubverstellung, motorische Zentralschmierung, Zweihandbedienung. Die Maschine kann in unserem Lager im betriebsbereiten Zustand besichtigt werden.

Tahun pembuatan: 1982, Kondisi: bekas, Pressure: 150 t Throat depth: 350 mm Stroke: 20–120 mm Ledpfx Ajlp U Iweahoak Strokes per minute: 40–60 spm Ram adjustment: 85 mm Table surface: 1050 x 690 mm Ram surface: 650 x 320 mm Pass-through opening in table: 325 x 200 mm Table height: 850 mm Pin hole in ram: Ø 50 mm Machine weight approx.: 8.6 t Space requirement approx.: 2500 x 2500 x 2900 mm Manual central grease lubrication Pneumatic clutch-brake combination Mechanical overload safety (shear plate) in ram Two-hand operation Foot pedal operation

Tahun pembuatan: 1995, Kondisi: bekas, Pressure: 125 t Stroke: 10–80 mm Stroke rate: 240 strokes/min Slide adjustment: 80 mm Table area: 850 x 600 mm Ram area: 760 x 550 mm Passage opening in table: 850 x 130 mm, adjustable Table height: 1100 mm Ram bore diameter: 50 mm Total power requirement: kW Machine weight approx.: 13 t Required space approx. (WxDxH): 3000 x 2000 x 3300 mm Pneumatic clutch-brake combination Manual ram adjustment Manual stroke adjustment Machine number: 212341 Centralized oil lubrication Roll feed: Alba GVHY300 Straightening machine: Soprem BRM 19/150/16/U Laedpelp U Nqsfx Aahsk

Tahun pembuatan: 1987, Kondisi: bekas, Pressure: 150 t Throat depth: 350 mm Stroke: 20-120 mm Strokes per minute: 50 / 75 spm Ram adjustment: 85 mm Table surface: 1150 x 670 mm Ram surface: 800 x 380 mm Lodpop Apxhefx Aahjak Pass-through opening in table: 330 x 200 mm Table height: 800 mm Pin hole in ram: Ø 50 mm Machine weight approx.: 8 t Required space approx. (WxDxH): 2000 x 2000 x 2700 mm Hydraulic clutch-brake combination Centralized oil lubrication Mechanical overload protection in ram Semi-automatic stroke adjustment Manual ram adjustment Two-hand operation Foot operation Counter bearing

Kondisi: bekas, Tahun pembuatan: 1972, nomor mesin/kendaraan: 1171, Total pressing force: 160 t Throat depth: 350 mm Ram stroke: 20 - 140 mm Ram adjustment: 75 mm Installation height (stroke bottom, adjustment top): 740 mm Table clamping area approx.: 1000 x 680 mm Ram clamping area approx.: 600 x 300 mm Strokes per minute: 50 min-1 Power requirement: 15 kW Machine weight approx.: 12 t Standard equipment Machine includes: - Safety fence HS Decoiler M 15 / 500 - Year of manufacture: 2009 Material width: 15 - 500 mm Coil weight: 1.5 t Coil outer diameter: 1400 mm Coil inner diameter: 380 - 530 mm HS Straightening machine RME 40 - 9 - Year of manufacture: 2009 Material thickness: 0.4 - 2 mm Number of feed rollers: 2 pieces Number of straightening rollers: 9 pieces Straightening roller diameter: 61.9 mm Ledpsuqdwxsfx Aahjak Feed roller diameter: 61.9 mm Feed speed: 40 m / min Feed length: 0 - 9999.99 mm Additional equipment The machine was retrofitted with SIEMENS S7 in 2009.

Tahun pembuatan: 1983, Kondisi: bekas, Pressure: 75 tons Table: 630x620 mm Ram: 500x450 mm Installation height: 370 mm Ram adjustment: 80 mm Lateral frame clearance: 300 mm Adjustable stroke: 08-100 mm Ljdpfxectl Dte Aaheak Strokes/min: 07-160 Power requirement: 11 kW Weight: 7 tons Height: 3050 mm SIRI roller feed for material 300x3 mm Hydraulic overload protection Hydraulic Ortlinghaus clutch with additional brake