Tekan hidrolik

WMW HydraulischePresse VEB Zeulenroda PYE10N

Kondisi: bekas, Tahun pembuatan: 2017, nomor mesin/kendaraan: 119, Lg.Nr. 24217 Lredpstpnplofx Agleg Technical Data: - Max. working width: 2520 mm - Max. material thickness at 40 kp/mm² tensile strength: 3.5 mm - Bending angle adjustment: pre-selectable - Upper beam drive: 400 V / 1.1 kW - Bending beam drive: 400 V / 4.0 kW - Space requirement (approx.): W 3900 x H 1550 x D 1200 mm - Weight (approx.): 4500 kg

Tahun pembuatan: 1970, Kondisi: baik (bekas), nomor mesin/kendaraan: 024.0468, Offer 22569 Technical Data: - Max. working width: 2040 mm - Max. material thickness: 2 mm - Bending angle: approx. 0 – 135° - Motorized upper beam stroke - Max. upper beam stroke: 85 mm Lodpfxep Atvmo Agljrg - Max. adjustment of bending beam: 80 mm - Manual bending operation is assisted by counterweight - Connection: 400 V - Floor space requirement: approx. W 3700 x H 1250 x D 450 mm - Weight: approx. 1700 kg

Kondisi: baru, Tahun pembuatan: 2025, Einstiegsmodell Faserlaser-Blechschneidemaschine Niedrige Laserschneidekosten und einfache Bedienung Der modulare Schneidtisch mit Versteifungen spart Zeit beim Zerlegen und verbessert Komfort und Steifigkeit. Lrsdjhv U Swspfx Agljg Die spezielle Faserlaserdüse und der Schneidprozess ermöglichen ein schnelleres Sauerstoffschneiden von Kohlenstoffstahl, gas- und kostensparendes Niederdruck-Stickstoffschneiden von Edelstahl sowie ein hochwertiges Luftschneiden bei Kohlenstoffstahl. Faserlaserschneidköpfe erkennen hervorstehende Hindernisse, um die Schadensrate effektiv zu senken und die Wartungskosten des Laserschneiders zu sparen. Materialien: Metall Zustand: Neu Lasertyp: Faserlaser Laserleistung: 1000W, 1500W, 2000W, 3000W Schneidbereich: 4000 x 1524 mm Schneidgeschwindigkeit: 0–100 m/min Positioniergenauigkeit: ±0,05 mm Wiederholgenauigkeit: ±0,03 mm Unterstützte Grafikformate: AI, BMP, DST, DWG, DXF, DXP, LAS, PLT CNC-Steuerung: Ja Kühlung: Wasserkühlung

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l Lsdjfxyhfjpfx Aglorg The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Tahun pembuatan: 1990, Kondisi: baik (bekas), Used side loader Kalmar, The machine has been well maintained. For further details, please refer to the pictures. Lrjdsh Et E Njpfx Agleg

Tahun pembuatan: 1979, Kondisi: bekas, Outreach: 22/29 mm Drive motor: approx. 0.55 kW at 380 V Required space: 450 x 500 x 560 mm Ledpfszif Sex Aglorg Weight: approx. 6.5 kg Pressing force: 30 kN

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1999, Press rem hidraulik PPBL 135/30 Tahun pembuatan: 1990 Spesifikasi teknis Gaya tekan: 1350 kN Panjang kerja: 3050 mm Lredpfx Agow Hca Hjleg Jarak antar tiang: 2250 mm Langkah: 110 mm Jarak meja – ram: 310 mm Ruang bebas (gap): 200 mm Lebar meja: 180 mm Kecepatan gerak awal: 100 mm/dtk Kecepatan kerja: 8 mm/dtk Kecepatan balik: 65 mm/dtk Berat: 6500 kg Motor: 7,5 kW Tegangan: 3 x 380 V Tangki oli: 120 L Opsi yang disertakan: • Back gauge dengan 2 jari • Jangkauan back gauge 600 mm • 2 penyangga depan 300 mm • Meja dengan slot tengah Perlengkapan yang disertakan: • R10.180.78 – 6 x 508 mm • Multi-V M90 – 1 x 3050 mm

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1999, berat keseluruhan: 22.800 kg, gaya penekanan: 250 t, CNC press brake Manufacturer: Weinbrenner Model: GP250 Machine specifications: - Crowning system Lredpfsr Sxq Rox Agleg - Die shifting - Rear stop type 2 - Front bending aid (disassembled for transport) - DNC 900PS CNC control All documentation for the machine is available.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, Löser centreless tube grinding machine – belt grinding machine – centreless tube polishing machine – cylindrical grinding machine Centreless tube grinding / polishing machine for workpieces with a minimum length of 1100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing and has since processed approximately 10,000 parts. Afterward, the machine was no longer used. As part of the general overhaul, the motors, bearings, and the entire control cabinet including frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not currently included. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations will also need to be adapted and retrofitted to match your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power rating of 7.5 kW per station. Lrsdpfx Aopugwiegljg The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, Pressure: 25 t Outreach: 160 mm Installation height: 500 mm Table dimensions: 650 x 650 mm Lrjdpfx Agefcw Apslog Ram diameter: 140 mm (round) Stroke: 130 mm Power requirement: 4 kW Weight: 2,000 kg Height: 2,100 mm Width: 1,100 mm Depth: 1,500 mm