Press hidrolik

WMW PYE 160 S1M

Kondisi: baik (bekas), Tahun pembuatan: 1988, Tekanan: 160 t Langkah: 500 mm Ukuran meja: 900 x 630 mm Jarak bebas lantai: 800 mm Djdpfxoytfcps Afteup Kecepatan turun: 200 mm/dtk Kecepatan naik: 125 mm/dtk Kebutuhan daya total: 17 kW Berat mesin kira-kira: 7 t

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Dujdpfx Afjfxyhfjtep Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: baru, New hydraulic high-speed press from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your requirements. Let us know your needs and we will provide you with an attractive offer including installation and service. ISGEC has delivered to over 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh, and over 200 presses to 40 Japanese customers. We are proud to have been the official sales partner since 2020 and look forward to hearing from you. Dujdpfx Ajf Rt Irjftjp

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1983, Pressing force: 2,000 kN Stroke rate: 60 strokes/min Adjustable stroke: 20 – 120 mm Shut height: 450 mm (at maximum stroke, slide up) Ram reinforcement: 100 mm Table size: 850 x 810 mm Djdegpxc Sopfx Afteup Passage opening: 00 x 0 mm Ram area: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-fold ram guide - Hydraulic overload protection - Motor-driven oil circulation lubrication - Motor-driven slide adjustment - Manual stroke adjustment - Pneumatic counterbalance cylinder for ram weight compensation - Vibration-damping machine feet

Tahun pembuatan: 2003, Kondisi: bekas, Press force 100 t Stroke 10-130 mm Strokes per minute 30-90 spm Throat depth 330 mm Ram adjustment 100 mm Table area 950x660 mm Ram area 540x440 mm Passage opening in table Ø 230 mm Table height 1000 mm Ram bore Ø 50 mm Total power requirement 7.5 kW Machine weight approx. 7 t Dujdpfera Rr Eox Aftep Pneumatic clutch-brake combination Beutler Datatech press control Centralized oil lubrication Hydraulic overload protection in ram Manual stroke adjustment Manual ram adjustment Two-hand operation Foot operation GSW straightening and feed machine VRMA 40/78, year of construction 2003 Feed controller HDS 50 BSA decoiler NO20/400V-AP

Tahun pembuatan: 1965, Kondisi: bekas, Pressing force 150 t Throat depth 550 mm Stroke 10 - 140 mm Table surface 1180 x 980 mm Strokes per minute 40 spm Shut height 500 mm Ram surface 1040 x 800 mm Ram adjustment 70 - 150 mm Bore hole (depth x diameter) 435 x 55 mm Power requirement 15 kW Machine weight approx. 12 t Space requirement approx. 3 x 1.7 x 3 m - with auxiliary brake - ram weight compensation - motorized ram adjustment - central grease lubrication (manual) - rupture disc - clamping plate - safe for manual loading/unloading Dsdpocubatsfx Aftsup - operating manual available

Kondisi: baik (bekas), Tahun pembuatan: 2000, tinggi total: 47.000 mm, lebar total: 27.000 mm, panjang total: 25.000 mm, lebar meja: 1.000 mm, panjang meja: 1.800 mm, berat keseluruhan: 43.000 kg, lebar pelat tuas: 600 mm, langkah bantalan cetakan: 200 mm, Siemens Simatic OP 27 control system Dsdpetiwgisfx Aftsup Sick photoelectric sensor Separate Rittal control cabinet Side walkways Floor-level installation

Kondisi: bekas, Tahun pembuatan: 1980, nomor mesin/kendaraan: A-07/471A, Maximum sheet width: 130 mm Straightening roller diameter: 40 mm Number of straightening rollers: 5 Dujdpfx Aecxxx Rjftsp Feeding rollers: 2+2 Minimum sheet thickness: 0.4 mm Maximum sheet thickness: 3.5 mm Weight: 0.4 t Space requirement approx.: 0.6 x 0.65 x 1.15 m Strip straightening machine with integrated infinitely variable VARI drive, reversible (forward and reverse operation), mode selector switch for manual and automatic operation, entry roller basket, analog display for roll position indication, roll position adjustment via handwheels, automatic loop control, in very good condition.

Kondisi: bekas, eccentric-press-automat-haulick-roos-type-rvd-125-double-column- eccentric-press-serial-no-212560-year-1981-pressing-force-125-ton s-table-size-880-x-800-mm-table-opening-470-x-140-mm-frame-width- 900-mm-side-frame-width-415-mm-ram-stroke-45-mm-ram-adjustment-ra nge-0-80-mm-installation-height-as-shown-340-mm-strokes-per-minut e-50-to-300-main-drive-motor-power-22-kw-power-supply-380-volt-50 -hz-double-connecting-rod-drive-mechanism-with-4-fold-mounted-ecc entric-shaft-for-off-center-ram-load-side-mounted-control-cabinet -nc-roll-feeder-ebu-width-250-mm-year-2003-standalone-control-pan el-for-roll-feeder-strip-feed-direction-left-to-right-space-requi rements-press-l-x-w-x-h-3000-x-2000-x-3020-mm-transport-height-29 50-mm-weight-of-press-approx-11-tons Duedehlnzkepfx Aftep

Tahun pembuatan: 1971, Kondisi: baik (bekas), Uncoiling mandrel – expanding mandrel with support table Strip width: 1,200 mm Strip thickness: 0.3 – 5 mm Dujdped Ha E Sofx Aftjp Coil weight: 10 t Mandrel diameter: 508 mm