Lemari laci bengkel dengan isi

WSM

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Kombinasi lemari laci bengkel WSM dengan isi - terdiri dari sebuah lemari pintu ayun dan sebuah lemari laci bengkel Isi terdiri dari: berbagai kepala pemotong, reamer karbida, mata bor karbida, tap ulir, mata bor spiral, limit plug gauge, berbagai mata bor dan mata frais chamfer, mata bor lubang dalam, mata bor solid, mikrometer jangka, berbagai alat ukur Dimensi total: 730 x 700 x 2400 mm Berat: 700 kg Hfodpfsyuvlkox Ag Rsd Perhatian: Barang harus diambil secara pasti antara 05 dan 07 Mei 2026 pada tanggal yang akan disepakati selanjutnya. FCA D-74385 Pleidelsheim – dimuat ke atas truk

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Kombinasi Lemari Laci Bengkel WSM dengan Isi - terdiri dari sebuah lemari pintu ayun dan lemari laci bengkel Isi terdiri dari: kepala countersink, pemotong tiga mata, frais bentuk dan cakram, dies, bor spiral, bor lubang dalam, bor karbida, frais karbida, pemotong dua mata, frais rol, frais tangkai, tap, tap karbida Dimensi total: 730 x 700 x 2400 mm Berat: 700 kg Perhatian: Barang harus diambil secara wajib antara tanggal 05 dan 07.05.2026 pada tanggal yang masih harus disepakati. Hfjdpfeyuvh Sox Ag Red FCA D-74385 Pleidelsheim – dimuat ke truk

Kondisi: baik (bekas), WSM stationary screwdriving unit, screwdriving station Assembly of components for car radios and navigation systems, as well as testing of the same. The assembly station is surrounded by a safety enclosure. The service doors are equipped with safety interlock switches. In automatic mode, the doors are locked and can only be opened after an automatic stop or in manual mode by pressing the 'Doors' button on the control panel. When a door is open, automatic operation cannot be started. Process sequence: The station is loaded with the pre-assembled module via the transfer belt. The following are the work steps of the automatic station during one WT cycle. Under normal operation, all three stations work in parallel. - Positioning of the WT with the pre-assembled module in station 2.1 - Lowering the carrier with scanner and vision sensor - Scanning of the three codes (front panel, front PCB, SD PCB), comparison with database - Checking the correct engagement of the FFC in the connector - Raising the carrier and lowering the WT onto the belt - Positioning the WT with the pre-assembled module in station 2.2 - Positioning the screwdriver and fastening the front PCB - Lowering the WT onto the belt - Positioning the WT with the pre-assembled module in station 2.3 - Lowering the light protection cover and contacting, moving in the carrier with the test sensors from below - Type-specific testing of the illumination of SD + CD slots and push buttons Hsdjibichopfx Ag Rjfd - Functional test of CD eject button - Lowering the WT onto the belt > process continues If errors occur during testing, these are displayed and can be corrected if possible. For this, switch to manual mode and open the doors. After the repair, restart the automatic mode; the WT will be retested in the station. If repair is not possible (e.g., screwdriving error), the WT will be marked as NIO (not OK) in the control system and will not be further processed. Manual NIO marking and removal are also possible. Financing through our partner bank is also possible. komplett-konzept.leasingo.de More assembly stations, both new and used, can be found in our shop! International shipping costs available upon request!

Kondisi: sangat baik (bekas), WSM SZ-250K Feeding Unit The WSM SZ-250K is a feeding unit from WSM-Automation, specifically designed for applications with high cleanliness requirements. The "k" in the model designation stands for "kurz" (short) and refers to the shortened length of the sorting spiral, which reduces abrasion caused by fill level and vibrations. Function: This is a feeding unit that combines the advantages of spiral conveyors with the necessity of clean processes. Special feature: The shortened sorting spiral (effective length) is the core innovation to minimize contamination due to abrasion. Hfedjx Elkfspfx Ag Rjd Application area: It is used where high cleanliness is required during feeding to ensure clean screw assemblies. Feeding unit SZ-250K consisting of: - Belt hopper BB-01-B (0.5 l) with level control and debris trap - Spiral conveyor WFL 200 IU (200 mm) with separator - Plexiglas enclosure Overall dimensions: H: 740 mm W: 700 mm D: 380 mm Screws: M 2.5 x 6 mm Voltage: 230 Volt More new and used items can be found in our shop! International shipping costs on request!

Kondisi: sangat baik (bekas), WSM SZ-250K feeder unit The WSM SZ-250K is a feeder unit from WSM-Automation, specifically developed for applications with high cleanliness requirements. The letter “K” in the model designation stands for “kurz” (short) and refers to the shortened length of the sorting spiral, which reduces abrasion caused by material level and vibrations. Function: It is a feeder unit that combines the advantages of spiral conveyors with the necessity for clean processes. Special feature: The shortened sorting spiral (effective length) is the core innovation for minimizing contamination from abrasion. Area of application: The unit is used wherever a high level of cleanliness is required during feeding to ensure clean screw assemblies. Hjdpfx Agex Elfcs Refd Supply unit SZ-250K consisting of: - BB-01-B belt bunker (0.5 l) with level control and dirt barrier - WFL 200 IU spiral conveyor (200 mm) with part separator - Aluminum frame with Plexiglas enclosure Overall dimensions: H: 740 mm W: 700 mm D: 380 mm Screws: M 2.5 x 6 mm Voltage: 230 Volt Other new and used items can be found in our shop! International shipping costs on request!

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2020, WSM SCS6 Gunting Pembongkaran/Besi Tua, bekas, 2020, 620 kg Produsen: WSM Abbruchtechnik Model: SCS6 Nomor Seri: 918931 Hsdpfx Asxlunwog Refd Tahun Pembuatan: 2020 Berat: sekitar 620 kg Kebutuhan oli: 80-100 l/menit Tekanan kerja: sekitar 330 bar Tingkat kebisingan: 121 dB Kondisi: Unit sepenuhnya berfungsi, semua silinder hidrolik rapat, pisau aus utuh atau sebagian telah diganti, tidak ada kerusakan besar pada bodi, baru saja diservis. Foto dan inspeksi dapat dilakukan.