Bandsaw ŻEFAM DRSD-63

zefam DRSD-63

Kondisi: bekas, Tahun pembuatan: 1968, Roll diameter 500 mm Throat depth 1050 / 485 mm Workpiece height 300 mm Saw blade length 3920 - 4050 mm Cutting speed 15 - 940 m/min Table height 1040 mm Table surface 750 x 800 mm Table tilt 15 degrees Total power requirement 4.0 kW Machine weight approx. 1750 kg Space requirements approx. 2100 x 1000 x 2100 mm - Unique mitre range left/right up to 30° acute angle Ijdpfx Aloiqp Ers Deih - Mitre setting via lockable indexing every 15° - Adjustable saw blade for optimal entry angle - Hydraulic vice on both sides - Electronic blade breakage monitoring - Smooth-running saw carriage via preloaded recirculating linear guides - Additional table 450 x 450 mm - Machine lamp

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, For sale is a demonstration unit Felder FB-710 bandsaw with a cutting width of 690 mm. The machine was only briefly used for demonstration purposes in our premises, therefore it is as good as new and comes with full warranty / guarantee. Technical data: - Table size: 840 x 700 mm - Cutting height: 460 mm Isdpfx Aeww Hhvel Djih - Cutting width: 690 mm - Table tilting: -5° to +45° - Saw blade length: 5120 mm - Weight: approx. 400 kg - Motor power: 7.5 HP - Exhibition machine - Year of manufacture: 2023 The bandsaw is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: bandsaw, sawing, saw, band Reference: R-A0117-67

Kondisi: bekas, de_hu_001 Isdpeyq Swzefx Al Dsih

Kondisi: bekas, Tahun pembuatan: 1978, en-001 Iijdsu Id Awjpfx Al Djh

Kondisi: baik (bekas), Tahun pembuatan: 1985, CNC lathe Manufacturer: GILDEMEISTER Type: N.E.F. 1020 Year: 1985 Control: EPL 2 Turning diameter over bed: 1,020 mm Turning diameter over cross slide: 600 mm Turning length: 3,000 mm Spindle speeds: 5 – 1,120 rpm Iodsqc Ul Aspfx Al Djih Motor power: 30 kW Spindle bore: 128 mm Tool turret: Parat size 4 with 10 holders Faceplate: 900 mm, steady rest, boring block, chip conveyor, complete machine documentation and parameter sets available. Machine disassembled and in storage. Total weight approx. 12,000 kg. For further technical details, please refer to the data sheets.

Kondisi: bekas, Machine not operational – control unit is not functioning Special offer price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Serial No. 300487 Year of manufacture: 2006 Pressing force 500 tons Distance between uprights (front/back): 2520 mm Table size: 2500 x 2500 mm Ram surface: 2500 x 2500 mm Ram stroke: 600 mm Max. installation height: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1,000 liters Ram retraction force: approx. 22 tons Adjustable approach speed: 100–800 mm/s Pressure build-up to 5000 kN: approx. 0.7 sec Return speed: approx. 300 mm/s Iiedpfxsdzqptj Al Dsh Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-fold flat guideway for the ram - Hydraulic ram locking at top dead center - Free-standing control cabinet (200 x 50 cm) - Electrical control: SIEMENS PLC S7-314 - Operation via SIEMENS OP 170-B (5.7”) - Free-standing two-hand control panel - Floor-level installation - Table plate: 2510 x 2530 x 135 mm (approx. 6,700 kg) - Central lubrication - Operating manual with circuit diagrams Required space (L x W x H): 372 x 260 x 460 cm Space required for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition

Kondisi: bekas, Vertical Bandsaw MÖSSNER REKORD Type SM 420 Machine No. 17010 Year of manufacture: 1968 Wheel diameter: 420 mm Throat width: 415 mm Throat height: 265 mm Table size: 605 x 600 mm Blade speed: 18 - 562 m/min, 8 steps Iedpfx Alodzqc Re Djih Saw blade length min/max: 3,150 / 3,260 mm Drive power: 1.1 / 1.7 kW Electrical connection: 380 V, 50 Hz - Saw blade speed adjustable via 4 gearbox stages and 2 motor speeds - Saw blade butt welding device IDEAL BS 0-16 with shears and grinding stone - Worktable tiltable on 2 axes Space requirements (L x W x H): 950 x 750 x 1,900 mm Weight: 570 kg Good condition

Kondisi: baik (bekas), Work wheel dimensions (OD x width x ID): Ø610 x 80 x Ø304.8 mm CNC brand: FANUC CNC model: 21 Oi TB Maximum distance between centers: 1060 mm Maximum Z-axis travel: 750 mm Maximum grinding length: 600 mm Center height: 225 mm Iisdpfx Astrgugjl Deh Min./max. grinding diameter: 10 – 300 mm Max. workpiece weight: 125 kg Maximum X-axis travel: 325 mm Wheel speed: 45 m/s Main motor power: 11 kW Workhead speed: 30 to 1000 rpm Workhead taper: MORSE 5 Workhead motor torque: 12 Nm Tailstock taper: MORSE 4 Tailstock quill stroke: 70 mm Tailstock hydraulic stroke: 150 mm Total power: 22 kW Length: 2300 mm Height: 1900 mm Width: 2634 mm Weight: 7750 kg Accessories: Cooling unit with paper filter; MARPOSS gauge, positioner, and balancer.

Kondisi: baik (bekas), Double-spindle drilling machine, gang drilling machine, drill press, upright drill, column drill - Spindle taper: B13 - Table size: 300 x 1100 mm - Throat depth: 150/180 mm - Spindle stroke: 50/70 mm - Weight: approx. 200 kg Iedpfx Alob A Ikij Deih

Kondisi: bekas, Meja mesin frais SCM T130 NPS - bekas - Iedpfx Aew Nv Nfel Djih pembatas frais dapat diatur halus, meja untuk mortise dan slot, putaran kanan/kiri ----- Data Teknis ----- Ukuran meja: 1.080 x 750 mm, Diameter spindle: 30 mm, Kecepatan: 3.000/4.500/6.000/7.000/10.000 rpm, Diameter port ekstraksi: 120 mm, Diameter port ekstraksi bawah: 120 mm