Baru karet gesekan roda

Zeiss

Kondisi: sangat baik (bekas), en-Zeiss coordinate measuring machine Type: O-INSPECT 442 Machine designation: Coordinate measuring machine Machine type: O-INSPECT 442 The ZEISS O-INSPECT multisensor measuring machine enables optimal optical or tactile measurement of all features. The CALYPSO software allows simultaneous display of actual condition, target profile, and deviations, making measurement results easy to recognize and interpret. General data: Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm Measuring range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM 800 kg Workpiece, max. 20 kg CMM noise level < 70 dBA Electrical data: Mains voltage: 100, 110, 120, 125, 230, 240 V~ (± 10%) Current type: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5%) Power consumption: max. 1500 VA Fuse: At 230 V or 240 V: 16 A At 100 V or 125 V: 15 A Travel speed: Creep mode: SLOW function: 0 to 5 mm/s Setup mode: 0 to 70 mm/s Series measurement operation: Axis (X, Y) max. 200 mm/s Axis (Z) max. 50 mm/s Axis (3D) max. 287 mm/s Ambient conditions: For flawless operation of the coordinate measuring machine, the following conditions must be met. Ambient temperature for readiness: +17˚C to +35˚C Relative humidity: 40% to 70% (non-condensing) Room temperature for measurement operation: 20˚C ±1 K Altitude above sea level: 100–125 V: max. 3000 m above sea level 230–240 V: max. 2000 m above sea level Probe system: Probe system CFS Probe type data: Probe type CFS 2mm Measuring range: 2 mm, working distance: 61 mm, measurement spot diameter: 12.5 µm Measurable surface inclination to incidence direction: 90 ± 15° Measuring range: 3 mm, working distance: 22.5 mm, measurement spot diameter: 12 µm Measurable surface inclination to incidence direction: 90 ± 30° Measuring range: 10 mm, working distance: 70 mm, measurement spot diameter: 24 µm Cedpfx Adozii Dhecerd Measurable surface inclination to incidence direction: 90 ± 20° The values for surface inclinations are limit values and depend on the reflectivity of the workpiece surface. Rotary table: Mass and resolution Mass of rotary table: 7 kg Resolution: 0.15'' Dynamics: Angular speed: max. 50˚/s Rotational speed: 8.3 min-1 Scope of delivery: In its standard configuration, the coordinate measuring machine type O-INSPECT is supplied with the following components: Coordinate measuring machine (CMM) Control (integrated) Operator console Computer with peripherals Software – CALYPSO 5.2 Documentation Probe system Reference stylus Calibration artifact Calibration template Scope of delivery: (Zeiss coordinate measuring machine as shown) Condition: used (Technical data subject to change and errors excepted!) Please request transport options before purchase. If you have further questions, we will be happy to answer them by phone.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, ketinggian potong (maks.): 400 mm, panjang mata gergaji pita: 5.550 mm, lebar pita gergaji: 80 mm, panjang meja: 800 mm, lebar meja: 1.060 mm, tinggi kerja: 400 mm, pl-hu-001 Csdsw H Rq Hopfx Adcord

Kondisi: hampir baru (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 201502530269, rentang pengukuran sumbu X: 700 mm, rentang pengukuran sumbu Y: 700 mm, rentang pengukuran sumbu Z: 600 mm, beban meja: 560 kg, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, en-ZEISS CONTURA G2 7/7/6 – VAST XXT TL1 Year of manufacture: 2015 | Commissioned: 2016 | Perfect condition | Very low operating hours For sale: ZEISS Contura G2 coordinate measuring machine (CMM) with a measuring range of 700 × 700 × 600 mm, equipped with a VAST XXT T1 scanning head. The device comes from a controlled laboratory environment, used exclusively “on demand” during a single shift, never in mass production – resulting in extremely low real usage and excellent technical condition. 🔹 Basic Information Manufacturer: ZEISS Model: Contura G2 Measuring range (X/Y/Z): 700 / 700 / 600 mm Year of manufacture: 2015 Year commissioned: 2016 Technical & visual condition: perfect Measurement error MPE (E0) = 1.7+L / 350 μm 🔹 Configuration & Equipment ✅ ZEISS VAST XXT TL1 active scanning head ✅ Rack / probe stylus changer ✅ Probe stylus set (mainly diameters ⌀ 0.6 mm and ⌀ 1.5 mm) ✅ Reference sphere ✅ BP26_SE control console 🔹 Usage History Credpoyzmbdefx Adcod Device operated exclusively in laboratory mode Sporadic, project-based use (“on demand”) Single shift, no series production / no production line usage Thanks to this, the machine has very low mechanical wear 🔹 Service & Calibration ✅ All service and calibration performed solely by official ZEISS service ✅ Regular maintenance according to manufacturer's recommendations ✅ No third-party intervention ✅ Machine fully operational 🔹 Status 📍 Machine available immediately 🔍 Demonstration possible 📄 Complete documentation ✅ Transport to be arranged by buyer

Kondisi: baik (bekas), Mikroskop Inverted Zeiss Primovert (SN: 3841010097) Lensa mata WF 10x/20 Crodpfx Aszhidrodcsd Zeiss Primo Plan-Akromat 4x/0.10 Zeiss Primo Plan-Akromat 10x/0.25 Ph1 Zeiss Primo Plan-Akromat 20x/0.30 Ph1 Zeiss Primo Plan-Akromat 40x/0.50 Ph1 Slider fase Ph1 / 0,3 Penutup debu

Kondisi: baru, Tahun pembuatan: 2025,

Kondisi: bekas, Holder probe dan ekstensi stylus ZEISS CMM original Crjdpfxozg Eczj Adced Holder probe ZEISS original Ekstensi stylus Berbagai stylus berbentuk bintang dan lurus Sesuai yang tertera pada gambar Kondisi: Bekas Kondisi kerja baik Dilepas dengan hati-hati dari ZEISS CMM yang berfungsi Ideal untuk pengguna ZEISS CMM yang mencari suku cadang asli atau perlengkapan probing tambahan.

Kondisi: sangat baik (bekas), ZEISS Model: DSM 962 The digitized scanning electron microscope DSM 962 is equipped with an integrated 4 MB image memory, a 40 MB hard disk for internal image storage, as well as drives for the external storage of data and images. This enables quick and easy acquisition of insights regarding the composition and morphology of specimen surfaces down to the sub-micron range. With a magnification range from 5x to 300,000x, the examination of both macrostructures and microstructures is possible. By using special accessories, the range of applications can be significantly expanded, enabling, for example, analytical investigations on micro-areas of the surface. Operation of the device can be performed using conventional control elements or, optionally, via keyboard and mouse. Electron optics and vacuum control are operated conventionally. Image memory functions are controlled via keyboard or mouse (optional). Centrally located on the control panel is a separate information display for menu visualization. This user manual is intended as a guide to help users achieve optimal results with the device. The explanations are kept as simple as possible to provide even less experienced users with the necessary knowledge. Crodpfx Aezdthyjdcsd Magnification range: 20x to 300,000x at 7 mm working distance Steps in 1-2-3-5-10 sequence Minimum magnification: 5x at 50 mm working distance Resolution: 4 nm – guaranteed with tungsten cathode at 30 kV, 6 mm working distance, specimen not tilted 25 nm – guaranteed with tungsten cathode at 1 kV, 6 mm working distance, specimen not tilted 3.5 nm – guaranteed with optimal LaB6 cathode at 30 kV, 6 mm working distance, specimen not tilted Scope of delivery: (DSM 962 with accessories as shown) Condition: used (Subject to changes and errors in technical data and specifications!) Please inquire about transport options prior to purchase. For further questions, feel free to contact us by phone.

Kondisi: baru, Tahun pembuatan: 2026, The long, cast iron, polished and ground jointer tables made of grey cast iron ensure precision during planing operations. The design is robust, durable, space-efficient, and meticulously engineered. These high-quality products make woodworking simply enjoyable. The PT310 model is equipped with a more powerful motor, ensuring greater precision and faster processing. The Cormak planer-thicknesser features a sturdy and well-thought-out construction, offering extensive adjustment capabilities for both hardwood and softwood machining in a fully mechanical manner. The adjustment process itself is straightforward, and switching from jointer to thicknesser mode takes only a few seconds. With a weight of 250 kg combined with cast iron ground tables, the machine guarantees excellent stability for safe operation. Additional rubberized feet allow for operation without any vibrations. VERSION WITH THE MOST POWERFUL MOTOR ON THE MARKET – 4.2 kW TOTAL POWER! The PT310 planer-thicknesser stands out for its exceptionally strong S6 4.2 kW (S1 3.0 kW) main motor, significantly more than competing machines, resulting in higher efficiency and stable performance. A more powerful motor means stable operation and ease of working with hard materials: processing hardwood requires greater force, and a strong motor handles this with ease. - Transitioning from jointer to thicknesser mode is very quick and simple. It involves unlocking the eccentrics, lifting the tables, and repositioning the dust extraction hood. - The thickness adjustment knob is located on the right side of the machine. - The aluminium tilting fence with an integrated scale allows for precise angle adjustment in the range of 90–45°. - The centrally mounted thickness table on a column features a handwheel for up/down adjustment. Codpfx Adovxh Rvecsrd - Planing height is measured with a built-in scale strip. Technical specifications: Cutterblock diameter [mm]: 70 Cutterblock speed [rpm]: 5500 Dust extraction port diameter [mm]: 120 Tilting fence angle [°]: 0 – 45 Number/dimensions of knives: 3 pcs / 310 x 25 x 3 mm Maximum jointer width [mm]: 310 Maximum thicknesser width [mm]: 308 Maximum planing height [mm]: 5–225 Maximum cutting depth, thicknesser [mm]: 2.5 Maximum cutting depth, jointer [mm]: 4 Thicknesser feed speed [m/min]: 6 Jointer table dimensions (L x W) [mm]: 1300 x 310 Gross weight [kg]: 250 Motor speed [rpm]: 2800 Motor power [kW]: S1 3.0 kW / S6 4.2 kW Supply voltage: 400V, 5-pin socket, 16A

Tahun pembuatan: 1990, Kondisi: bekas, x-travel 850 mm y-travel 1200 mm z-travel 600 mm Total power requirement: kW Machine weight approx.: t Space requirement approx.: m Overhauled: 2000 X-axis as longitudinally movable gantry: 850 mm Y-axis cross slide in the gantry: 1,200 mm Z-axis as measuring head quill (vertical): approx. 600 mm Clearance between gantry columns: approx. 1,000/1,080 mm Clearance height: approx. 750 mm Total table size: approx. 1,000 x 2,100 mm Table height above floor: approx. 850 mm Machine height: approx. 3,050 mm Weight: approx. 3,800 kg Special equipment / accessories: - Granite plate as measuring table and as crossbeam, vibration-dampened - 3D measuring probe for accommodating 5 different probe tips and for SCANNING operation for continuous data acquisition, resolution 0.1 µm - Simultaneous control of all 3 axes - HEWLETT-PACKARD computer system H 382 with color monitor, floppy disk drive, keyboard, and possibly printer - ZEISS software available as follows: Crodpfxjt Hwqke Adced UMESS 300/MFT 300 with expansion package (version 1998), plus 302 Form and Position Measurement, 303 Fit Functions, 305 Automatic Operation, 307 Parameter Control Manager, and the following options: Tools/KMG Disk Rev. 7xxx / SAM 300 / KMG Disk / Drill Pattern Program A 741 and Probe Check 99 - Mobile manual control panel with progressive control lever for continuously adjustable travel speed of all 3 axes - Probe magazine mounted on the machine, equipped with 3 probes, with automatic probe changing device - Separate electrical and control cabinet Type 608485, separate computer table, separate cabinet - Operating manuals, various measuring probes, and ball/standard measuring normal that can be fixed to the table,

Tahun pembuatan: 1995, Kondisi: bekas, Travel (X-axis): 9200 mm Travel (Y-axis): 1600 mm Travel (Z-axis): 2400 mm Workpiece Diameter: mm Working Area: mm Centre Distance: mm Control: ZEISS C 99 Total Power Requirement: kW Machine Weight: approx. 30 t Space Requirement: approx. 10 x 3.6 m ZEISS - STIEFELMAYER Double-Sided 3D CNC Measuring Machine Type: SMM Duplex / Eagle Eye Year of Manufacture: 1995, but modernized several times Working Range of Measuring Stands: X-Axis (horizontal): approx. 9,200 mm Y-Axis (cross): approx. 1,600 mm / 3,200 mm Z-Axis (vertical): approx. 2,400 mm Measuring Table Size (4-part): 10,000 x 3,500 mm External Dimensions of Measuring Table including guideways: 10,000 x 3,650 mm Table Thickness: approx. 450 mm Table Height above Floor: 650 mm Crjdpfx Adjt Hwwkocjd Max. Traversing Speed: approx. 150 mm/sec. Total Weight: approx. 30,000 kg Special Equipment / Accessories: • Measuring stands system C / SMM, mounted left and right on the sides, laterally movable on the measuring table with column cross-section 160 x 160 mm for vertical adjustment, and boom cross-section approx. 80 mm x 80 mm for horizontal adjustment • Machine/CNC Control Zeiss C 99, one unit per measuring stand • Equipped probe type RST-P with DSE rotary and swivel joint, CAA correction, and reference probe, collision protection • EAGLE EYE Navigator for optical measurement, particularly for automotive bodywork and other pressed parts – provides significant time savings, retrofitted in 2007 • Probe changer for 8 probes, mounted on the front of the table • Special cast measuring table divided into 4 plates = 4 x 5,000 x 1,750 mm, plus height-adjustable leveling feet, approx. 250 mm high, sufficient quantity • T-slots in longitudinal Y-direction ±500 mm and various location bores with threads at specified intervals Y=±300 / 700 / 1000 mm • Machine is sold WITHOUT corresponding SOFTWARE (remains in the factory), WITHOUT operator consoles, and WITHOUT standards (spheres) Condition: Good to very good – ideal for measuring large automotive body components Delivery: ex stock – as inspected (without software and operator consoles) Payment: strictly net upon receipt of invoice We look forward to receiving your order.

Kondisi: baru, Brugger HX14 Chipper – Compact, Powerful, and Ready for Deployment Anywhere! Cedpfjvpfutsx Adcord The Brugger HX14 chipper combines maximum performance with outstanding mobility. Featuring a robust 25 HP petrol engine and the capability to effortlessly shred branches and trunks up to 14 cm in diameter, it is the ideal choice for demanding horticultural and landscaping projects. Thanks to its compact design and road approval, the HX14 can be transported quickly and easily to any location – whether in the garden, at construction sites, or remote areas. Efficiency and flexibility in a single machine! Your advantages at a glance: • Powerful: 25 HP petrol engine for powerful chipping • High Capacity: Processes branches and trunks up to 14 cm in diameter • Compact Design: For easy handling and space-saving transport • Mobile and Flexible: Comes with trailer and road homologation for use anywhere • Perfect for Professionals and Demanding Projects: Reliable and durable for daily use The Brugger HX14 – Your powerful partner for maximum mobility and efficiency! Technical Specifications: • Dimensions – 274 x 125 x 175 cm (L x W x H) • Weight – 383 kg • Blades – 2, 36 cm wide • Max. Diameter – 14 cm • Throughput/h – 10-14 m³/h • Intake chute at drum – 36 x 14 cm Contact us for a tailor-made offer!

Kondisi: bekas, Tahun pembuatan: 2005, Mesin Pengukur Koordinat (CMM) ZEISS PRO T SELECT ukuran besar tersedia untuk penjualan segera. Mesin sebelumnya dipasang di laboratorium metrologi profesional dan telah dibongkar secara profesional. Saat ini mesin disimpan di dalam ruangan dan siap untuk dikirim. Spesifikasi teknis: * Produsen: ZEISS * Model: PRO T SELECT * Tahun produksi: 2005 * Nomor seri: 131860 * Meja pengukur baja: 4000 × 3000 mm * Sistem probe: Kepala probe indeks Renishaw RDS-CAA * Kalibrasi sesuai DIN EN ISO 10360 * Kalibrasi ZEISS terbaru dilakukan pada tahun 2025 (dokumentasi tersedia) * Mesin lengkap * Penyimpanan di dalam ruangan * Siap langsung dimuat dan dikirim ke seluruh dunia Termasuk: * Mesin pengukur ZEISS PRO T lengkap * Kepala probe Renishaw RDS-CAA * Dokumentasi kalibrasi ZEISS (2025) * Dokumentasi teknis (berdasarkan permintaan) Informasi tambahan: Credezga D Hjpfx Adced Mesin dapat dilihat dengan perjanjian terlebih dahulu.

Kondisi: bekas, Lever dial gauge Passameter Manufacturer: Zeiss Jena Measuring range: 0–25 mm Csdpfx Adoda Abascsrd in wooden case

Kondisi: baru, WM5150 ROGI bed milling machine 400V-3Ph Motor ----- 2.4 kW Vertical spindle speed range ----- 94 ~ 2256 rpm Spindle taper ----- ISO 40 Table ----- 1220 x 360 mm Quill stroke ----- 180 mm Crjdpfxjga T Dws Adcjd Quill feed ----- 0.1 / 0.15 / 0.3 mm/rev Longitudinal travel (x) ----- 600 mm Cross travel (y) ----- 360 mm Vertical travel (z) ----- 500 mm Overhang ----- 370 mm Spindle head swivel range ----- -45° to +45° Spindle/table distance ----- 110 - 610 mm Feed range longitudinal/cross ----- (8) 24 - 720 mm/min Weight ----- 1800 kg INCLUDES * 3-axis digital readout, brand SINO * Automatic work table feed X, Y * Automatic spindle feed * LED lighting * Coolant system * Deluxe control cabinet * Tool box with various tools

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, 3D coordinate measuring machine / CNC coordinate measuring device | Manufacturer: MAUSER/ZEISS | Model: KMZ-G 602520 | Year of manufacture: 1988/2003 Optionally available including the air-conditioned hall. The machine has been regularly calibrated by ZEISS. Last calibration was performed on 07/08/2025, next calibration (recommended) scheduled for 08/2026. TECHNICAL DATA: Measuring range (LxWxH): 6,000 x 2,500 x 2,000 mm Travel distances: - X-axis: 6,000 mm - Y-axis: 2,500 mm - Z-axis: 2,000 mm - Length measurement uncertainty according to VDI/VDE 2617: U3 = (5.0 + L/250)µm, V2 = 3.5 µm - Length measurement uncertainty according to ISO 10360-2: MPE_E = (5.0 + L/250)µm - Ambient conditions to maintain specified accuracy: * Temperature range: 21°C +/- 3°K * Temperature fluctuation: 0.5°K/h, 1.0°K/d, 0.5°K/month - Ambient conditions for operational readiness: * Temperature range: +15°C to 35°C * Humidity: 30 to 70% General Features, Equipment: - Gantry measuring device with finely machined precision guides and ball recirculating slides - Second Y-axis with granite guide and air bearing - High-resolution Zeiss scales - Positive-drive systems on all three axes - Collision protection for the ram and the probe head (with VAST probe head) for manual and setup operation - Safety position for crane lock - Scale temperature compensation - Microcomputer control - Reference workpiece (cube), star stylus Credpfx Aoy Iub Sodcod - Reference stylus D = 8 mm, Length: 115 mm - Calibration master D = 30 mm - Including basic software package - Load capacity: Limited only by foundation design - Measuring system: VAST - Software: Zeiss CALYPSO - Documentation No guarantee for completeness or correctness of the technical specifications and equipment details. Subject to prior sale.