Coordinate Measuring Machine

Zeiss UMM 550

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Chsdpfsuz If Nox Anpsd Very good condition Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: siap digunakan (bekas), An automated tube bending system with two Wafios bending heads and a Kuka Twister robot is available. 1) Wafios RB20 bending head, bending direction: left and right, maximum total tool height: 78 mm, bending force: 360 Nm, bending speed: 560°/s, bending radius: 57 mm, repeat accuracy for bending, rotation, and feed: +/-0.05 mm. 2) Kuka KR 16-2 KRC 2 robot, axes: 6, payload: 16 kg, maximum reach: 1611 mm, repeat accuracy: +/-0.05 mm, weight: approx. 235 kg. Includes overhead magazine, Kuka control cabinet, discharge conveyor, safety fence, mobile operator panel, docking station, and work table. Documentation available. On-site inspection is possible. Cedpfx Aowwlkionpshd

Kondisi: baik (bekas), Tahun pembuatan: 1991, x-travel 4000 mm y-travel 2500 mm z-travel 1200 mm Control: FIDIA M30 Spindle power: 37 kW Spindle speed: 4,500 rpm Chjdpevwgmgefx Anped Gantry clearance: 2,300 mm Distance spindle to clamping surface: 1,250 mm Spindle taper: ISO SK-50 Table dimensions (longitudinal): 3,000 mm Table dimensions (cross): 1,500 mm The 5-axis portal milling machine Ingersoll-Bohle is in good condition and inspections can be arranged with the seller. Accessories: - High-frequency rapid spindle, 3.8 kW, with 25,000 rpm Description: - Steplessly adjustable angled milling head (spindle speed: 4,500 rpm)

Kondisi: baru, Tahun pembuatan: 2024, SJET系列为多功能工业零件清洗机，操作极其简便。 转盘式清洗机。旋转篮筐零件清洗机。 非常适用于除油和维修清洗。 工作原理：将装有零件的篮筐置入设备后，热水与清洗剂混合液喷淋至旋转篮筐上。特制不锈钢喷嘴与篮筐的旋转运动，确保篮内所有零件得到彻 底清洗。水在返回水箱前经过过滤，有效延长清洗剂使用寿命并降低消耗成本。 Codpfjd I Aw Ejx Anpshd SJET系列有效减少水与清洗剂用量，帮助用户保护环境。 SJET设备全部采用AISI 304不锈钢制造。 可选不同篮筐规格和容量。 可选清漂和烘干功能。 可选不同上盖类型。 旋转篮式清洗机。 如需更多参数及选项，欢迎随时联系我们。

Tahun pembuatan: 1990, Kondisi: bekas, x-travel 850 mm y-travel 1200 mm z-travel 600 mm Total power requirement: kW Machine weight approx.: t Space requirement approx.: m Overhauled: 2000 X-axis as longitudinally movable gantry: 850 mm Y-axis cross slide in the gantry: 1,200 mm Z-axis as measuring head quill (vertical): approx. 600 mm Clearance between gantry columns: approx. 1,000/1,080 mm Clearance height: approx. 750 mm Chjdpfx Anet Hwqkjpjd Total table size: approx. 1,000 x 2,100 mm Table height above floor: approx. 850 mm Machine height: approx. 3,050 mm Weight: approx. 3,800 kg Special equipment / accessories: - Granite plate as measuring table and as crossbeam, vibration-dampened - 3D measuring probe for accommodating 5 different probe tips and for SCANNING operation for continuous data acquisition, resolution 0.1 µm - Simultaneous control of all 3 axes - HEWLETT-PACKARD computer system H 382 with color monitor, floppy disk drive, keyboard, and possibly printer - ZEISS software available as follows: UMESS 300/MFT 300 with expansion package (version 1998), plus 302 Form and Position Measurement, 303 Fit Functions, 305 Automatic Operation, 307 Parameter Control Manager, and the following options: Tools/KMG Disk Rev. 7xxx / SAM 300 / KMG Disk / Drill Pattern Program A 741 and Probe Check 99 - Mobile manual control panel with progressive control lever for continuously adjustable travel speed of all 3 axes - Probe magazine mounted on the machine, equipped with 3 probes, with automatic probe changing device - Separate electrical and control cabinet Type 608485, separate computer table, separate cabinet - Operating manuals, various measuring probes, and ball/standard measuring normal that can be fixed to the table,

Kondisi: baru, - with lateral discharge opening - with pneumatic soundproof lid - total volume 53 l - working volume approx. 40 l - dimensions approx. 790 x 415 x 670 mm (h) - working container dimensions approx. 590 x 290 x 290 mm (h) - drive 0.55 kW - max. speed 1500 rpm Chedpfsd I Dpijx Anpsd - PU-coated bottom approx. 10 mm - PU-coated side wall approx. 8 mm - total weight approx. 80 kg - incl. dosing pump - incl. control unit with variable speed, 1000 – 1500 rpm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 13.000 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 500 mm, tinggi total: 2.700 mm, panjang total: 3.800 mm, lebar total: 2.350 mm, lebar meja: 500 mm, panjang meja: 750 mm, berat keseluruhan: 9.500 kg, kecepatan spindel (maks.): 10.000 rpm, jumlah slot dalam magazin alat: 22, Perlengkapan: dokumentasi / manual, konveyor serpihan, Dijual: Mesin frais AXA DBZ - tahun 2014. Cedpfx Aney D Enhepjhd Pengendali Heidenhain iTNC 530 HSC 2 area pemesinan 750x500 Meja indeks 5 sumbu pada satu meja (gerakan halus) Magazin 22 alat SK40 Skala optik pada semua sumbu Sistem penghisap kabut oli Pengeluarkan serpihan Pompa bertekanan tinggi Stasiun filtrasi cairan pendingin eksternal Mesin berfungsi dengan baik, siap digunakan = dapat diuji Garansi 3 bulan Kemungkinan instalasi dan pengoperasian di lokasi pelanggan Dirancang untuk operasi bolak-balik (pemesinan pada satu meja, pemuatan pada meja lainnya).

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), Minimum/maximum bar diameter: 5mm/102mm, minimum/maximum bar length: 150mm/1200mm, machine length: approx. 1950mm, machine width: approx. 950mm, machine height: spindle height + 345mm, machine weight: approx. 450kg. Documentation available. On-site inspection possible. Chedpfxewt Tk Nj Anpod

Kondisi: bekas, Tahun pembuatan: 1987, Translation of technical machinery sales description: x-axis travel 400 mm y-axis travel 250 mm Workpiece height 485 mm Control ELESTA CNC 314 Total power requirement 10 kW Machine weight approx. 4000 kg Space required approx. m H A U S E R (Switzerland) CNC-controlled coordinate grinding machine Model S 3 – CNC 314 Year of manufacture 1987 / partially overhauled in 1998 # S 3 - 0463 _____ Table size approx. 600 x 380 mm Table load capacity approx. 300 kg Longitudinal table travel max. (X) 400 mm Cross table travel max. (Y) 250 mm Vertical adjustment of grinding carriage max. (W) 450 mm Grinding spindle stroke max. (Z) 120 mm Grinding head stroke, hydraulic 15 - 7,500 mm/min Mounting height table/grinding spindle min./max. -75 / +485 mm Grinding spindle overhang 350 mm Taper grinding max. 16° Grinding diameter, borehole max. approx. 230 mm 18 spindle speeds, depending on spindle motor, continuously variable 4,500-80,000 rpm Planetary rotation speed (C), continuously variable 5-250 rpm U-axis, radial feed 6 mm Total drive approx. 10 kW – 380 V – 50 Hz Machine weight approx. 4,000 kg Accessories / Special equipment: • CNC path control Type CNC 314 (ELESTA-POSELESTA II) with monitor, for 4 axes (=X, Y, C + U-axis), with interpolation in 2.5 dimensions (X, Y, C). The U-axis is a feed axis and not capable of interpolation. Teach-in programming directly on the machine, with various sub-programs, as well as manual axis movements from the control panel or with an electronic handwheel. Separate digital display for the Z-axis • U-axis as manual and controlled radial feed axis, on the grinding head, with digital display of feed rate, • 2 grinding motors #5674 and #3980 for spindle speeds up to 80,000 rpm, • Built-in acoustic grinding contact indicator KSV 5 • HI-Cut system (oil cooling) and automatic fire protection system • Separate coolant unit with band filter, separate hydraulics and control cabinet, central lubrication, various collets, operating tools, etc. Unfortunately, no further accessories available at present. Chodpfx Anst Hw Txeped Condition: good to very good / shortly ready for demonstration under power Delivery: ex stock here – as inspected Payment: strictly net – upon receipt of invoice

Kondisi: bekas, Technical Data Manufacturer: Leitz Max. workpiece weight: 1,400 kg automatic probe changer Maximum permissible measuring deviations according to DIN EN ISO 10360: Chedoddtufopfx Anpod MPEE = 0.8 µm + 2.5 µm/m < 6.0 µm MPEP = 1.0 µm Measuring range X = 1,800 mm Y = 1,000 mm Z = 600 mm The machine can be upgraded with new software according to customer requirements. Price: on request! Assembly and commissioning available! We are happy to prepare a detailed offer for you! Note: Our offer is directed exclusively at professional customers! (Specifications, details and prices subject to change and prior sale!)