Mesin penghancur

ZERMA ZPS 1200

Kondisi: baik (bekas), Refrigeration compressor, chiller, cooling compressor, condensing unit, refrigeration compressor, compressor, motor compressor, cooling unit -Manufacturer: Bitzer, compressor motor compressor -Type: BHS 752 -Power: 4 kW / 1450 rpm Bedsguztgepfx Am Ijlg -Displacement: 28.11 m³/h Max. permissible pressure: 24.5 bar -Dimensions: 640/450/H425 mm -Weight: 131 kg

Kondisi: siap digunakan (bekas), de Bledownx Uijpfx Am Iog

Tahun pembuatan: 1991, Kondisi: hampir baru (bekas), berat keseluruhan: 1.420 kg, kecepatan rotasi (maks.): 1.485 rpm, 3 pcs stainless steel volute casing pumps in process design 2 x CPK-CM 250-315, year of manufacture 1991 1 x CPKN-C1 250-315, year of manufacture 2011 !!! Price per unit !!! The pumps were operated on a test bench and all have very low operating hours! See pictures! Bljdsqabiajpfx Am Isg Flow rate: 1001 m³/h (278 liters/second) Delivery head / pressure: 18 m / 1.8 bar Pump speed: 1485 rpm NPSH: 5.00 m Shaft seal: single-acting mechanical seal with flush water Manufacturer: Burgmann Impeller type: closed radial impeller Impeller diameter: 324 mm Bearing type: rolling bearing Lubrication: oil Lubricant monitoring: oil level controller Materials: 1.4408 (AISI 316) Pump casing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Cover plate: 1.4408 (AISI 316) Shaft: tempered steel C45+N Impeller: 1.4408 (AISI 316) Bearing bracket lantern: gray cast iron JL1040 Shaft sleeve: CrNiMo steel Suction nozzle nominal diameter: DN 300 Discharge nozzle nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure discharge side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Baseplate: painted gray cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 rpm Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor power: P2: 75 kW Thermal class: F Degree of motor protection: IP55 Cosphi: 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Tahun pembuatan: 1993, Kondisi: sangat baik (bekas), 2 unit pompa sentrifugal Produsen: KSB Model: WKF 50/7 Kapasitas aliran: 5,5 l/s (19,8 m³/jam) Tinggi tekan: 214 meter (21,4 bar) Suhu maksimum: 130°C Seal: Mechanical seal dengan koneksi air pembersih Motor listrik: VEM Daya penggerak: 30 kW Kecepatan putar: 2935 rpm Bljdsibwarspfx Am Ieg ! Harga per unit !

Kondisi: baik (bekas), Refrigeration compressor, chiller, cooling compressor, refrigeration unit, cooling condensing unit, condenser, motor compressor, cooling machine, cooling unit -Manufacturer: Bitzer, Compressor Motor Compressor -Type: BHS 592 S -Power: 3 kW / 1,450 rpm -Displacement: 22.14 m³/h -Max. allowable pressure: 24.5 bar -Quantity: 2x cooling units available -Price: per unit Bledpfxoguzr He Am Ijg -Dimensions: 550/315/H390 mm -Weight: 88 kg

Kondisi: siap digunakan (bekas), Bitzer Compressor Bjdpfx Ash Dht Dom Ielg Type: 60-70.2 Flow rate: 219.1 m³/h Cooling capacity: 143 kW at -5°C/+40°C, 118 kW at -10°C/+40°C, 77 kW at -20°C/+40°C Refrigerant: R404A Stock quantity: 3 units Stock number: S 75 Condition: Used, good We offer a wide range of other refrigeration equipment. Refrigeration units, compressors, evaporators, condensers, chillers, cold rooms, as well as refrigerated and catering furniture, and machines for restaurants and meat processing. Check our other listings or call us— not all items are listed on Machineseeker.

Kondisi: bekas, Tahun pembuatan: 2015, jam operasional: 25.000 h, Fungsionalitas: berfungsi sepenuhnya, panjang rotor: 2.200 mm, kecepatan rotasi (min.): 58 rpm, berat keseluruhan: 30.000 kg, daya: 220 kW (299,12 hp), tegangan masuk: 400 V, 1 Bodpfow Tk E Aox Am Ijlg

Tahun pembuatan: 2014, Kondisi: perlu perbaikan (bekas), Fungsionalitas: berfungsi sepenuhnya, The machine has been out of use and stationary for several years, therefore it requires maintenance before being put back into service, which will be the responsibility of the buyer. Bljdpfotu U Ebsx Am Ieg

Tahun pembuatan: 2024, Kondisi: baru, Overband plate magnet with cleaning mechanism Design: stainless steel VA 1.4301, fully welded Includes cleaning drawer Dimensions: 800 x 500 x 180 mm 4 x M16 lifting eyes on the rear side These two lifting magnets were previously used by one of our customers as 'police magnets' in the meat processing industry. Both overband magnets are in excellent condition. The stated price applies to one unit. Currently, 2 units available for immediate delivery from stock! All information subject to change, only while supplies last! Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator Our core competence is providing customers with exactly what they truly need. We work together with our customers to develop customized, individual solutions and deliver corresponding systems from our own production. Please feel free to contact us by phone as well to find a suitable solution for your application. Overband plate magnet Design: stainless steel VA 1.4301, fully welded Includes cleaning drawer 420 x 420 x 200 mm 420 x 420 x 250 mm 620 x 420 x 200 mm Bjdpfx Ajhfwmdsm Ielg 620 x 520 x 200 mm 800 x 500 x 200 mm 800 x 520 x 250 mm Fully welded stainless steel housing to protect the magnet core Lifting eyes for suspension Cleaning drawer for easy removal of collected foreign material. Suitable for installation above all types of conveyor systems...

Kondisi: bekas, Tahun pembuatan: 2014, jam operasional: 18.700 h, berat keseluruhan: 27.000 kg, jumlah bilah: 41, panjang rotor: 1.800 mm, daya: 200 kW (271,92 hp), kecepatan rotasi (maks.): 87 rpm, tegangan masuk: 400 V, 001 Bodpfx Amjw Tk Udo Ijlg