Mesin penghancur

ZERMA ZXS 1500

Kondisi: bekas, nomor mesin/kendaraan: 13299, Rotor diameter: 750 mm Rotor width: 1,500 mm Rotor knives: 76 Stator knives: 1 row Iajdpfjyr Twrex Afijr Feed opening approx. 1,500 x 1,500 mm Drive motor: 2 x 45 kW

Tahun pembuatan: 2013, Kondisi: bekas, Technical specifications for the bale opener line for RDF, MSW, paper, cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Model: BO 4000 Year of manufacture: 2015 Number of opened bales: 674 pcs Operating time: only 3 days, exclusively for commissioning the entire system upon initial installation Opening cycle: approx. 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Maximum bale weight: 2,000 kg Conveyor height: 1,400 mm Maximum conveyor width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opener line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Operator display: SIEMENS SIMATIC HMI Touch Control system: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of delivery: - Infeed conveyor 3,500 x 1,200 x 1,400 mm - Feed conveyor to opener 1,500 x 1,200 x 1,400 mm - Bale opener (gripper with knife) Special equipment: - Oil heater in hydraulic oil tank - Control cabinet heater - Oil cooler for hydraulic unit Explanation for the short operating period: The complete Cross Wrap bale opener line type BO 4000 was installed in 2015 at a municipal waste incineration plant. The background for the installation was to ensure that in case of a malfunction or during maintenance of the incineration plant, municipal waste could still be received, compacted, wrapped, and stored, until normal operations resumed. Afterwards, all bales could be opened and the waste fed into the standard incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and has never been used in regular operation since. Only during the commissioning and initial trial runs in 2015 were 674 bales opened over a period of three days. The system is in excellent, immediately operational condition. Due to reconstruction work at the incineration plant, the installation site of the bale opener was required for other purposes. Therefore, the complete line is now available for sale. Brief description of the bale opening process: Pressed bales are placed onto the feed conveyor from the side or from behind using a forklift truck. For opening, the bales must be positioned so that the wire or twine strapping runs horizontally to the conveyor; otherwise, the bales must be rotated by 90°. The infeed conveyor advances one bale at a time to the cutting unit. The gripper holds the wires or twine strapping firmly. The rotating knife cuts the bale longitudinally. Afterwards, the gripper returns to its home position. The opened bale is then conveyed to the discharge chute and falls onto the downstream conveyor technology. Iaedpfxju Tg I Do Afior Remarks: Original purchase price of the entire system: €296,000. Complete documentation (operating manual, CE declaration, electrical/hydraulic diagrams) is available. The system has been dismantled into shipping units, placed in storage, and is available at short notice for inspection and loading. We accept no liability for the technical data provided or for any potential errors.

Tahun pembuatan: 2022, Kondisi: siap digunakan (bekas), The system consists of a Vecoplan shredder, drag chain conveyor, and a lifting and tipping device with protective grid. The equipment was used for plastic recycling and includes: 1) Vecoplan Shredder VIZ 1300 S, with hooded feed chute, base frame, discharge electrode, drag chain conveyor, and lifting-tipping device. Feed length: 1250 mm; feed width: 1300 mm. Drive type: electric motor with V-belt drive. Rated motor power: 90 kW; rated current: 169 A; motor speed: 750 rpm; protection class: IP 55. Rotor diameter: 495 mm; number of cutting crowns: 87; cutting crown dimensions: 40 x 40 mm. Nominal rotor speed: 185 rpm; rotor speed range: 95–265 rpm. Screen hole diameter: 40 mm. Drive side: right (standard). Overall length: approx. 2850 mm; overall width: 2515 mm; overall height: approx. 1350 mm; weight: approx. 7200 kg. 2) Drag Chain Conveyor. Trough width: 500 mm; section length: 2700 mm; screw diameter: 315 mm; screw length: 3000 mm. Conveyor speed: 24 m/min; drive power: 2.2 kW. 3) Lifting and tipping device with protective grid and safety light curtain. Lifting capacity: approx. 500 kg; tipping angle: 150°; tipping height: approx. 3390 mm. Container length/depth: 857 mm; container width (tipping edge): 1060 mm; container height: 916.5 mm; container clearance height: approx. 255 mm; container weight: approx. 135 kg; maximum container weight with product: 500 kg; container volume: 0.5 m³. Lift and tip speed: 6.6 m/min. Motor output / rated current: 1.5 kW / 4.95 A. Conveyor chain: 2 units. Safety chains / chain break protection: yes. Chain breaking force per strand: 70,000 N. Operating hours: approx. 6400 h. Complete documentation is available. Additional spare parts are optionally available. On-site inspection is possible. Iasdsx Dm A Repfx Afisr

Kondisi: bekas, Tahun pembuatan: 2019, jam operasional: 16.500 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: #005, berat keseluruhan: 46.100 kg, panjang kabinet kontrol: 5.000 mm, lebar kabinet kontrol: 2.400 mm, tinggi kabinet kontrol: 2.600 mm, daya: 450 kW (611,83 hp), jenis arus masuk: Arus searah (DC), kecepatan rotasi (maks.): 32 rpm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Equipment - Power output: 450 kW DC – equipped with ABB frequency converter including DTC control - Bevel-helical gearbox – roller speed up to approx. 32 rpm / variable via belt transmission and frequency converter control. - BioPower roller with 42 teeth - Roller length: 3,000 mm, diameter: 800 mm - Infinitely variable speed control - Tooth type: Form C3 trapezoidal tooth 174 mm - Armored wear plates on the roller Ijdpex I A Aksfx Afijar - Hydraulically adjustable counter comb – cutting gap adjustment via display - 4 comb cylinders - Central lubrication - Hydraulically operated comb cover - Pre-assembled main control cabinet - Local control unit on the machine - Start-up warning system - Engine compartment lighting - Painted RAL 2011 deep orange The machine is equipped with the following additional features: - Mounting strip Limiter - Limiter elements - Automatic comb positioning - Automatic comb cleaning system - Machine support frame, height 1,200 mm - Three-sided feed hopper left or right - Flashing light module - Solenoid valve for water spray system - Radio remote control (EU) - Profibus integration - 2 additional power outlets in the control cabinet, up to 7.5 kW each - Control cabinet container / air-conditioned, dimensions LxWxH 5,000x2,400x2,600 mm On request, the machine can undergo comprehensive refurbishment at our factory. - OPTIONAL ONLY: Discharge belt AA 8,350 x BB 1,200 mm, 5.5 kW, reversible Other: - Display in German, English available - Stickers and control panel labelling in German, available in English - Warning labels in German, available in English - Operating manual in German (paper and digital) (translation for local language possible)

Kondisi: baru, ZXS 1500 – 2x75kW – Working area: 1500 x 1490mm ZXS 2000 – 2x90kW – Working area: 1500 x 1900mm ZXS 3000 – 2x110kW – Working area: 1500 x 2700mm ZXS Series: The single-shaft shredder for demanding size reduction applications. These machines are built to be extremely robust and deliver high throughput rates. Working widths from 1500 to 3000 mm and a rotor diameter of 750 mm are available as standard. Ijdpfsyr Tf Aex Afioar Versatile applications for the ZXS Series: A wide range of materials can be shredded and prepared for recycling with the ZXS Series, including old cables, PET bottles, paper and cardboard, and more. Contact us for expert advice on how your material can be shredded and recycled.