Tekan kolom tunggal - hidrolik

ZEULENRODA PYE 10 S1

Kondisi: baik (bekas), Maximum pressing force: 10 tons. Operating pressure: 16 MPa Cylinder stroke: 400 mm Downward speed: 100 mm/sec Speed up to: 450 mm/sec Power requirement: 5.2 kW Weight: 1.3 tons Clamping table modified! Not the original table! Ljdsydlvkepfx Ag Rjri

Kondisi: bekas, Tahun pembuatan: 1969, Wheel diameter – max. 160,175 mm Wheel width 355 mm Module – max. 4.5 Spindle bore 75 mm Centre distance (between centres) 410 mm Number of teeth – min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Centre distance between cutter and workpiece – max. 138 mm Centre distance between cutter and workpiece – min. 30 mm Milling head – swivelling 120° Cutter speeds 70 – 400 rpm Axial feeds 0.25 – 4.0 mm/rev Radial feeds 0.09 – 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/Accessories: Lsdpfx Ajvzhf Ssg Rjri - Change gears - Milling arbors - Clamping devices - Documentation

Kondisi: bekas, Tahun pembuatan: 1971, Drilling capacity (steel/cast iron): 23 mm Spindle taper: 3 MT Throat depth: 275 mm Lsdpferz Nqaox Ag Rjri Table size: 300 x 400 mm Quill stroke: 90 mm Spindle speeds: 100 - 1180 rpm Feeds: 0.1 / 0.6 / 0.25 mm Drive motor: 380 V, 1.25 / 2.15 kW Required space: 850 x 400 x 1770 mm Weight: 280 kg

Tahun pembuatan: 1990, Kondisi: baik (bekas), Used side loader Kalmar, Lredpfx Aeh Et E Njg Rei The machine has been well maintained. For further details, please refer to the pictures.

Kondisi: bekas, Tahun pembuatan: 2009, Diameter hisap: 250 mm Aliran volume nominal: 3534 m³/jam Luas filter: 22,6 m² Motor: 5,5 kW Briket: Kapasitas output sekitar: 30 kg/jam Diameter briket: 65 mm Motor: 3,0 kW Lodpfx Aeydql Djg Rsri Lokasi gudang: Nattheim

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Löser centreless tube grinding machine – belt grinding machine – centreless tube polishing machine – cylindrical grinding machine Centreless tube grinding / polishing machine for workpieces with a minimum length of 1100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing and has since processed approximately 10,000 parts. Afterward, the machine was no longer used. As part of the general overhaul, the motors, bearings, and the entire control cabinet including frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. Lrodspugwispfx Ag Rsi Wastewater treatment including pumps is not currently included. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations will also need to be adapted and retrofitted to match your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power rating of 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Kondisi: seperti baru (mesin pameran), A demonstration belt grinder WIEGAND with two belt speeds, ideal for steel and stainless steel Belt dimensions: 2000 x 150 mm Belt speed: 18/37 m/sec Lrodpfepgmufex Ag Roi Power: 2.2/3.8 kW 400V/50Hz Weight: 110 kg Technical data and dimensions: Subject to change/errors excepted

Tahun pembuatan: 1971, Kondisi: bekas, en-GB:Technical Details: Maximum wheel diameter: 300 mm Module range: max. 5 / min. 0.5 Maximum workpiece weight: 60 kg Approx. machine weight: 4.0 t Machine dimensions (LxWxH): 1800 x 1850 x 2500 mm Control cabinet dimensions: No. 1: 1930 x 400 x 1920 mm No. 2: 800 x 230 x 1950 mm Exhaust system dimensions: 1400 x 700 x 560 mm Cooling unit dimensions (LxWxH): 1.2 x 1.0 x 0.45 m Electronically controlled gear flank grinding machine Suitable for modules up to 5 and diameters from 240 – 300 mm Stepless feed rate per workpiece revolution: 0.4 – 3.2 mm Max./min. number of teeth: 130 / 12 Lsdpovc Apbofx Ag Rsri Max./min. pressure angle: 30° / 14°30′ Max./min. helix angle at 24 teeth: 6000 / 200 mm Max. helix angle, both sides: 45° Grinding worm speed: 1,900 rpm Supplied without dressing attachment Equipment: Approx. 77 various change gears, extension pipes, and various accessories Two of these machines are available for sale. Both machines are supplied via two shared control cabinets and an exhaust system.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Cell with KUKA KR 180 Grinding Robot Grinding Cell Berger 2012 (External Grinding A1) - Total weight approx. 6300 kg - Cell dimensions: approx. 4650 x 2400 x 3100 mm 6-axis Robot KUKA KR 180 R2500 Extra - Year of manufacture: 2011 - Control system: KRC 4 - Additional axis (7th axis) Belt Grinding Station BSS10 - Max. belt dimensions: 3500 x 30 mm - Max. contact wheel diameter: 200 mm - Motor power: 4 kW 2 x Polishing Stations - Polishing wheel diameter: 350 - 600 mm - Power: 5.5 kW Gripper Change Cabinet Lrjdpsg Saqvofx Ag Rsi Interoll Automation GmbH Belt Conveyor - Total length approx. 2000 mm - Belt width approx. 440 mm The price includes a complete setup as shown in the video. We have 4 such cells available. It is possible to manufacture any individual part as demonstrated in the video.

Kondisi: baru, Tahun pembuatan: 2024, en-001 Lsdpfxeq Tpkyj Ag Rori