Mesin penggiling profil

ZIERSCH & BALTRUSCH Starline 2000

Kondisi: bekas, en-001 Bsdpfx Aajvadd Ij Tjwi

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, Oil-hydraulic Double-Column Press 400 T with Sliding Table Press Type: Double-Column Press Thermally Neutral Range: 80 – 120 °C Number of Operator Sides: 1 side Forces: - Pressing Force max.: 4,000 kN - Free Tearing Force max.: 400 kN - Pressure Build-Up Time (Closed Tool, Steel on Steel): Max. 4 sec. Dimensions: - Length: 3,800 mm - Width: 4,475 mm - Max. Opening: 800 mm - Stroke: 800 mm - Table Height above floor: 1,100 mm - Total height above floor (overall height): approx. 4,300 mm - Minimum hall height: 5,500 mm - Parallelism deviation at 20°C: +/- 0.1 mm Deflection: - Determined at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight: - Total weight of the press (without operating fluids and table plate): approx. 28 t Press Table: - Table size: 1,500 x 1,500 mm Speeds: - Fast closing speed: 100 mm/s - Pressing speed: 8 – 3 mm/s Noise Level: - Sound pressure level measured at 1.5m height at control panel according to DIN 45635-T16-KL3: max. 78 dB(A) Hydraulics: - Number of main cylinders/ram cylinders: 1 pc. - Operating pressure: max. 300 bar - Pressure build-up time (press): 4 sec. - Pressure accuracy during ram stroke: +/- 3 bar - Main pump: BOSCH REXROTH axial piston pump approx. 145 L/min - Oil volume: approx. HLP 46 MW, 1,000 liters - Ambient temperature: max. 40 °C - Oil temperature: max. 55 °C - Auxiliary pump: BOSCH REXROTH gear pump 10 L/min for pressure maintenance up to 300 sec. Electrical System: - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Hydraulic main motor connection: 40 kW Bwodpfsph Uk Njx Aa Tsi Features: - Sliding table press with 400 T capacity - Closing speed up to 100 mm/s (adjustable via touchscreen) - Opening speed up to 100 mm/s (adjustable via touchscreen) - Pressing speed start at 10 mm/s (adjustable via touchscreen) - Table plate size: 1,500 x 1,500 mm - Ram size approx. 1,600 x 1,500 mm - Oil temperature monitoring: 55°C warning, 60°C shutdown - Automatic lubrication (adjustable via touchscreen) - Free positioning of ram (adjustable via touchscreen) - SICK/PILZ light curtains 14 mm, front, up to 1,800 mm height - Hydraulic and mechanical ram locking - Circulation oil cooling (adjustable via touchscreen) - Ejector in table, 20 T press force, 350 mm stroke - Ejector travels outward with table - Table plate precision milled, with DIN 22 T-slots - Pressure setting from 60 T to 400 T (adjustable via touchscreen) - Travel limit optionally by pressure or position - Setup, single stroke, and automatic cycle operation (adjustable via touchscreen) - Swivelling control panel on cabinet - Two-hand safety operation, with open button, selector switch for manual/single stroke/automatic cycle - Assembly, commissioning, and training available at extra charge - Control system supplied by SIEMENS (S7 1200), with 9-inch touchscreen monitor. Scope of delivery includes SECOMEA Ethernet-based remote maintenance unit. - The press features two side windows, each 1,000 mm high and 800 mm wide, with double doors. (Sliding Table Press, Hydraulic Press, Double-Column Press)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, nomor mesin/kendaraan: 1, panjang penggilingan: 1.000 mm, lebar penggilingan: 600 mm, Horizontal Surface Grinding Machine Geibel & Hotz FS 1050 SD Grinding area: 1000 x 600 mm Magnetic chuck with fine pitch Multiple flanges and wheels included Bsdpjv U Dfuefx Aa Towi Large paper band filter Levelling feet Wiring and circuit diagrams Balancing scale Machine was in use for a maximum of 2 days per week – not a mass production machine Price: ex location – unpacked – uninsured Delivery: immediately – subject to prior sale Errors excepted – technical data not binding

Kondisi: bekas, translation-001 Bodpjv Armcsfx Aa Tewi

Kondisi: baik (bekas), Tahun pembuatan: 1998, Manufacturer: Henninger Model: ZS-201 Year of Manufacture: 1998 - Self-centering device - Double column slideways - Dressing unit - Tailstock with rack and pinion drive - Eccentric adjustment 0–20 mm - Large cone-stone tooling package Specifications Metric | Imperial Minimum workpiece diameter: 20 mm Maximum workpiece diameter: 450 mm Maximum workpiece length: 1200 mm Spindle speed: 18,300 rpm Maximum grinding angle: 45–120° Bsdpfxevt Tuio Aa Towi Maximum workpiece weight: 190 kg Approximate Dimensions Length: 1,250 mm Width: 1,250 mm Height: 1,900 mm Weight: 365 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. All information is given in good faith; however, accuracy cannot be guaranteed. As such, this information does not constitute representation or contractual terms. We recommend verifying all critical details.

Kondisi: sangat baik (bekas), Multiple underground 150 m³ steel storage tanks (firefighting water tanks) Capacity: 150,000 liters Bjdpfx Ajfnh Tgea Tswi Diameter: approx. 3,000 mm Length: approx. 22,500 mm Weight: approx. 28,000 kg The tanks are converted according to DIN 14230 for use as underground firefighting water tanks: The tank features a firefighting water suction connection in accordance with DIN 14244, equipped with a permanently mounted A-type fire brigade coupling per DIN 14319, design type B, without dip tube. In addition, the tank is fitted with a ventilation flange/stub connection NW/DN 100 with cap, total length approx. 1,300 mm, suitable for 800 mm earth coverage and 500 mm above ground level. - The tank is empty, cleaned, and has been factory-coated externally with bitumen. - On request, we can supply the tank with a full internal bitumen-based lining (for corrosion protection) or an epoxy resin internal coating. Cost-effective delivery with our own truck is possible. Simply let us know your delivery location and you will promptly receive the exact freight charges. An inspection is possible at any time by prior appointment. If you need further information, feel free to call us or send us an email at b.barth (at) barth-tank.de

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2006, CNC Universal – Mesin Milling & Bor DECKEL MAHO DMU 80 P duoBlock Dengan kontrol lintasan MILL PLUS iT Tahun pembuatan: 2006 Perjalanan sumbu: X 800 Y 800 Z 800 mm Rentang kecepatan putar: 0 – 8.000 rpm tanpa tingkat (SK 50) Dengan perlengkapan berikut: Meja putar NC 900 mm x 700 mm area penjepitan (beban meja maks. 1,4 t) Kepala frais universal dengan sumbu B terkontrol Penukar alat universal dengan 40 slot majalah sebagai penangkap ganda (SK 50) Kabinet pelindung penuh dengan pintu geser dan lampu interior IKZ – 40 bar Konveyor serbuk Rotoclear Probe pengukur 3D Heidenhain TS 641 Mode operasi 3 + 4 Handwheel elektronik Bjdpjxn Aczjfx Aa Tswi 50 buah dudukan alat SK 50 3 buah alas mesin yang dapat diatur ketinggiannya Perlengkapan transportasi Manual operasi

Kondisi: siap digunakan (bekas), tinggi total: 3.300 mm, lebar total: 3.450 mm, panjang total: 6.000 mm, produsen pengendali: Siemens, berat kosong: 17.000 kg, Model: FTV 850 Pendinginan melalui spindle Area kerja dapat dibagi menjadi dua bagian 2 meja magnetik Kolom bergerak, mirip dengan Mazak VTC / Unisign / Hedelius Struktur sasis berat Gerak longitudinal sumbu X: 1800 mm Perjalanan silang sumbu Y: 850 mm Bwodpjwxz D Usfx Aa Tji Gerak sumbu Z (Tinggi): 800 mm Dimensi area penjepitan - meja: 2300 x 900 mm Universal (2x 360°): ISO 50 Kepala bor (1 x 90°): 19 kW

Kondisi: bekas, Tahun pembuatan: 1995, Fungsionalitas: belum diuji, Abstand zwischen den Spitzen: 650 mm Innen- / Außenschleifen Bwjdpfxjwu Tdfj Aa Tsi 2-Achsen SONY Digitalanzeige Kühlmitteltank

Kondisi: bekas, Travel in X-axis: 6500/13,150 mm Travel in Y-axis: 4000 mm Travel in Z-axis: 1250 mm Travel in W-axis: 2250 mm Control system: Sinumerik 840 D Bwedowa Dx Rjpfx Aa Tsi Clamping surface of table: 5500/12,150 x 3000 mm Passage between columns: 3500 mm Max. distance between work table and spindle nose: 3000 mm Max. workpiece weight: 70,000 / 105,000 kg Ram dimensions: 480 x 510 mm Spindle speeds – stepless: 6.3 - 4000 rpm Milling spindle motor: 63 kW Torque at the spindle: 3300 Nm Tool holder: DIN 39871 AD ISO 50 Feed rate X/Y/Z = 24,000 mm/min Total power requirement: 120 kVA Machine weight approx. 245 t Required space approx. 29 x 7.7 x 8.1 m The machine is in almost as-new condition and was completely overhauled and modernized in 2020 for €1.6 million! Equipment/Accessories: - Automatic tool magazine for 153 tool positions - Automatic milling head magazine for 6 milling heads - Machining modules/milling heads:  Machining module – straight – straight long –  Machining module – angle standard – 4000 rpm, 144 x 2.5b0, ISO 50  Machining module – narrow extended angle – 40 kW, 4000 rpm, 1800 Nm, 144 x 2.5b0, ISO 50  Machining module – universal index – 40 kW, 4000 rpm, 2100 Nm, - C-axis 144 x 2.5b0, B-axis +/- 44 x 2.5b0, ISO 50 - Coolant system - Chip conveyor - Technical documentation