Nozel pemotongan HSD, 22 buah

Zinser HSD 6 - 10 mm Acetylen 5 bar

Tahun pembuatan: 2022, Kondisi: seperti baru (mesin pameran), Manipulator with hydraulic height adjustment, faceplate with clamping slots, and handheld remote control. Height (faceplate horizontal): approx. 532 – 1,132 mm Stroke length/stroke time (hydraulic): approx. s = 600 mm, t = 20 s Faceplate swivel range: approx. ±300° Height (axis, faceplate vertical): approx. 709 mm Faceplate dimensions: Ø1,200 mm x 40 mm, 6 clamping slots Main axis speed: approx. 2.0 rpm (other speeds on request) Main axis torque: approx. 7,500 Nm Faceplate speed: approx. 2.5 rpm Gtjdpfxefw Ah Ro Adtet Faceplate torque: approx. 1,500 Nm

Kondisi: baik (bekas), Tahun pembuatan: 1963, Vertical turning lathe Manufacturer: JUNGENTHAL Type: DK 1400 Year: 1963 with 1-axis digital readout. Max. turning diameter: 1400 mm Faceplate: 1250 mm Gtedsvi Hryepfx Adtst Automatic turret head Spindle speeds: 3.5 - 180 rpm Feeds: 0.063 - 3.15 mm/rev Rapid traverse: 1800 mm/min For further specifications, see data sheet. Machine documentation available. Machine dimensions: Length 4 m, Width 2.4 m, Height 3 m, Weight 16 t Good overall condition.

Kondisi: baru, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Semi-automatic sawing cycle with workpiece clamping-sawing-frame raise to preset height after completed cut. Infinitely variable hydraulic cutting pressure and feed rate monitoring at the saw band. This ensures optimum settings for any sawing task, i.e., constant pressure for solid material and constant feed for thin-walled profiles. Especially suitable for universal use with different cross-sections, materials, and frequent miter cuts. The machine control complies with CE standard 89/289. Technical Data: Cutting capacity in mm round/flat 90°: 325/500 x 300 45°: 300/300 x 300 30°: 200/200 x 200 45°: 300/300 x 300 Rapid lowering of the saw frame to the material edge via push button Gtodpfx Adst D Azcotjt Manual miter adjustment from 45°–90°–30°, continuously adjustable via scale The miter pivot point is the intersection between the saw band and the fixed clamping jaw, which ensures no change in length measurement when changing angles Hydraulic full-stroke workpiece clamping – CETOP hydraulic system At any frame angle, material is clamped parallel at 90° Complete coolant system with electric submersible pump Centralized machine operation Saw band drive with limit switch Movable band guide arm, adjustable to material width Saw band deflection rolls with carbide guides Integrated chip removal brush Saw band tensioning with torque wrench Paint finish: silver grey/blue grey (RAL 7001/ RAL 7031) Minimum remnant piece length: 60mm Cutting speed: AC frequency-controlled drive 15–150 m/min, steplessly adjustable on operator panel Drives: Saw band: 3.0kW; 400V, 50Hz Hydraulics: 1.1kW Coolant pump: 0.1kW Saw frame feed: Stepless up to 300mm/min, hydraulically controlled Saw band tensioning: Mechanical, with torque wrench Saw band dimensions: 4200x34x1.1mm Working height: 750mm (without mounting elements) Weight: 850kg Dimensions (LxWxH): 1450x2350x1350mm

Tahun pembuatan: 1997, Kondisi: baik (bekas), Material dimensions Gtjdpfx Asha Hdhedtet Max. round: Ø 380 mm Max. square: 380 x 380 mm Cutting lengths Single stroke: 10 - 510 mm Multiple stroke: max. 4590 mm Dimensions (LxWxH): 3100 x 2200 x 1850 mm Weight: 3,100 kg

Tahun pembuatan: 1990, Kondisi: bekas, Cutting diameter 420 mm Bandsaw blade length 4800 mm Table height 600 mm Total connected load 3.8 kW Machine weight approx. 1.3 t Required space approx. 2500 x 1200 x 1600 mm The bandsaw is in very good condition Gsdpfx Adel Ichnstott

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, tingkat otomatisasi: manual, jenis aktuasi: listrik, jumlah rol: 3, diameter poros: 130 mm, diameter rol: 380 mm, kecepatan rotasi (min.): 5 rpm, berat keseluruhan: 4.500 kg, daya: 15 kW (20,39 hp), tegangan masuk: 380 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, henti darurat, MESIN TEKAN LENGKUNG PROFIL 130 – MODEL PARMIGIANI ITALIA MESIN ELEKTRO MEKANIS DIAMETER POROS KELUARAN: 130 mm 3 ROL PIRAMIDA ROL ATAS DIPUTAR DENGAN UNIT GEAR & MOTOR LISTRIK 11 kW ROL SAMPING UNTUK TEKAN LENGKUNG DIGERAKKAN MOTOR LISTRIK 3 kW DIAMETER ROL ATAS: 380 mm DIAMETER ROL SAMPING: 350 mm PANEL KONTROL DITINGKATKAN TEKNOLOGI INVERTER ELEKTRIK TERBARU, KONTROL DAYA PENUH DENGAN KECEPATAN VARIABEL TAK TERBATAS PERINTAH ELEKTRIK PADA TOMBOL DORONG PORTABEL PEMBACAAN POSISI DIGITAL ROL TEKAN LENGKUNG BERAT MESIN: 4,5 TON Gtsdpfx Aexackcsdtot SISTEM KESELAMATAN & DARURAT TERPASANG MESIN BEKERJA DENGAN POROS VERTIKAL

Kondisi: baik (bekas), Gear cutters, module cutters, hob cutters, involute gear cutters, module milling head, cylindrical face milling cutters, cylindrical cutters, milling cutters, hobbing cutters, spline hobbing cutters - Manufacturer: Fette/JAL, 23 pieces of hobbing cutters - Shank: Ø 16 mm (13 pcs), Ø 22 mm (4 pcs), Ø 27 mm (6 pcs) - Various types: see photos, additional pictures available upon request Gtsdpogfcnkefx Adtet - Price: complete set - Dimensions: 250/170/H90 mm - Total weight: 9.8 kg

Kondisi: bekas, Tahun pembuatan: 1990, Turning diameter 250 mm Turning length 450 mm Control system TX8D Spindle bore 80 mm Gedpst Hwq Djfx Adtett Spindle speed: 3,150 rpm CNC bar turning machine with 3 turrets Extra-large spindle bore, equipped with bar loader

Kondisi: bekas, Tahun pembuatan: 1990, Rotary Table Expert Eda450 Table Diameter: 450 mm Approximate Machine Weight: 380 kg Gtodsf Nlrqopfx Adtot +++++ Please note that the machine is currently dismantled and ready for loading. For this reason, a live demonstration under power or the production of a video is not possible. Moreover, our listing includes the most informative photos in the best possible quality. Unfortunately, it is not possible to send additional images. +++++

Kondisi: baru, Thread diameter M6 - M22 mm Infinitely variable speed 60/200 rpm Torque 105 Nm Air pressure 6 - 8 bar Working range 400 - 2000 mm The pneumatically driven D-JSC tapping machine features, among other things, a compressed air motor with quick-change chuck and a robust yet flexible working arm. The tapping arm can be mounted directly onto the worktable via the mounting flange and is immediately ready for use, ensuring quick changeover times. Thread taps can be easily brought to the required hole location without needing to position the workpiece underneath the tapping machine. The unit features an adjustable angle design, allowing the quick-change chuck to be tilted so that horizontal tapping is also possible. Pneumatic tapping machines for M3 - M12 threads, angle adjustable. Includes 6 quick-change chucks with slip clutch. Optional accessories: - Clamping table with T-slots: 750x600x650mm or 990x700x800mm. - Magnetic base. Gtodjfg U Skepfx Adtet