Mesin bubut pusat

ZMM MEXPOL TUS 400

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 690 mm, lubang spindel: 150 mm, diameter pembubutan: 1.040 mm, diameter pembubutan di atas carriage atas: 690 mm, tinggi pusat: 500 mm, lebar di tengah: 2.000 mm, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 160 mm, jarak gerak sumbu Z: 380 mm, saluran batang: 55 mm, Centre height: 500 mm Distance between centres: 2,000 mm Maximum turning diameter On cross-slide: 690 mm Over bed: 1,040 mm In natural gap: 1,070 mm Bed width (hardened guideways): 670 mm Gap length: 480 mm Gap length in front of platform: 320 mm CARRIAGE Bed guide length: 1,020 mm Cross-slide travel: 640 mm Top-slide travel: 360 mm SPINDLE Spindle nose: ASA 15’’ Spindle bore diameter: 150 mm Front bearing size NN: 200/310/82 mm Rear bearing size NNU: 190/260/69 mm Internal Morse taper in reduction sleeve: No. 6 Number of spindle speeds: 24 Speed range: 4 – 800 rpm THREAD CUTTING Total threads: 398 Metric threads: 0.5 – 224 mm Module threads: 0.25 – 11 mod. Whitworth threads: 56 – 1/8 TPI DP (Diametral Pitch) threads: 112 – 1/4 DP FEEDS Klsdeyhhuwspfx Ahhst Number: 108 Longitudinal, cross, and top-slide: 0.05 – 22.4 mm/rev RAPID TRAVERSE Longitudinal, cross and top-slide: 2,500 mm/min Longitudinal return: 5,000 mm/min TAILSTOCK Quill diameter: 130 mm Quill Morse taper: No. 6 Quill travel: 420 mm STEADY RESTS Bed steady rest capacity: 140 – 500 mm Carriage steady rest capacity: 40 – 350 mm PERMISSIBLE LOAD Overhang: approx. 1,500 kg Between centres, without steady rest: approx. 5,000 kg Between centres, with steady rest: approx. 6,000 kg Machine weight: approx. 7,800 kg

Kondisi: bekas, Tahun pembuatan: 1998, 1 Kledpfx Aew Rkt Ijhhot

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, daya motor spindle: 45.000 W, tinggi total: 2.120 mm, berat keseluruhan: 11.500 kg, produsen pengendali: SIEMENS, model controller: 810 D, panjang produk (maks.): 5.400 mm, jumlah sumbu: 2, This Weiler E120x3000 was manufactured in 2001. It features a center distance of 3000 mm, a center height of 600 mm, and a swing diameter over bed of 1200 mm. The spindle bore is 165 mm, and it is equipped with a robust main drive rated at 45/37 kW. This machine is ideally suited for heavy-duty turning work and comes with accessories such as a chuck, a faceplate, and a steady rest. Contact us for further information about this machine. • Working area: • Distance between centers: 3000 mm • Center height: 600 mm • Swing diameter over bed: 1200 mm • Swing diameter over cross slide: 830 mm • Cross slide travel: 590 mm • Bed carriage guide length: 860 mm • Turning tool cross-section (H x W): 40 x 40 mm • Tool holder: Parat size 4 • Spindle: • Spindle nose DIN 55027 / 55026, size 15 • Spindle bore: 165 mm • Main spindle taper: metric 171 • Main drive: • Drive power (60% / 100% duty cycle): 45 / 37 kW • Max. spindle torque: 8000 Nm • Speed range gearbox stage 1: 1-280 rpm • Speed range gearbox stage 2: 4-900 rpm • Tailstock: Ksdpfx Ahox D Hz Tjhjlt • Quill diameter: 140 mm • Quill stroke: 300 mm • Quill taper: MK 6 • Dimensions and weight of the machine: • Overall length: 5400 mm (without chip conveyor), 6535 mm (with chip conveyor) • Overall width: 2600 mm • Overall height: 2120 mm • Machine weight: 11,500 kg • Overhaul Work Performed: • Hardening and grinding of all bedways • Grinding of tailstock ways • Overhaul of the complete bed and cross slide assembly (grinding/scraping of all guides) • Renewal of bed carriage slideways • Renewal or shimming of keyways and ground guides • Replacement of all wipers • Replacement of all belts • Overhaul of the main spindle assembly in the headstock • Renewal of the X-axis including bearings • Renewal of the Z-axis including bearings • Overhaul of the tailstock quill (regrinding MK 6 taper), replacement of spindle and nut • Adjustment of the tool system • Replacement of the main spindle motor • Inspection of auxiliary motors (X and Z axis) • Refurbishment of existing safety guards (sliding hood/chuck guard) • Replacement of all rotary, cam, and limit switches • Replacement of spindle and handwheel encoders • Renewal of flexible cables and coolant hoses in the working area • Replacement of centralized lubrication system • Renewal of energy chains • Painting as specified (standard structural basalt and light gray) • Assembly and geometric inspection of the machine according to DIN 8605 Additional Equipment • 1x used 630 mm diameter chuck with various jaws • 1x used 1100 mm diameter faceplate • 1x used steady rest, max. 300 mm diameter • 1x used chip conveyor

Kondisi: bekas, Tahun pembuatan: 1991, technical-details-de Kjdpfex D Ufmex Ahhjlt

Kondisi: bekas, Tahun pembuatan: 2006, en-GB: Technical Details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Turning length: 850 mm Centre distance: 850 mm Longitudinal travel (Z-axis): 900 mm Cross travel (X-axis): 260 mm Control: Manuaplus 4110 Spindle speed: 10 - 3000 / 2x steps rpm Spindle torque: 920 Nm Spindle bore: 70 mm Cross travel (X-axis): 8 m/min Longitudinal travel (Z-axis): 10 m/min Operating hours (power on hours): approx. 34,600 h Tailstock taper ISO: MK 5 Tailstock quill stroke: 180 mm Total power requirement: 24 kVA Machine weight approx.: 5.2 t Ksdpfxewtct Hj Ahhelt Machine dimensions (LxWxH) approx.: 2.2 x 3.2 x 1.9 m Multifix tool holder size C 3-jaw chuck Ø 250 mm Chip tray Manual hour counter Live centre in tailstock Operation via control panel and monitor Accessories: 4-jaw chuck Ø 250 mm with inner jaws Various chuck keys Machine lighting 8x base plates 4x wedge lifters Various pairs of jaws 1x closed steady rest Ø 100 mm

Kondisi: bekas, Tahun pembuatan: 1998, Technical Details: Swing diameter: 830 mm Turning length: 4,000 mm Swing diameter over cross slide: 540 mm Spindle bore: 130 mm Klsdpowwlt Rofx Ahhot Speed range: 2 – 1,600 rpm Rapid traverse speed: 4 / 5 m/min Feed speed: 1 – 2,000 mm/min Total power requirement: 55 kW Machine weight approx.: 7.5 t Floor space required approx.: 7 x 2.2 x 2 m Equipped with R&D MTC-K cycle control MULTIFIX tool post, size D Coolant system

Kondisi: baru, We sell spare parts for the following milling machines: FN20, FNGJ20/30, FNGJ32, FNGJ40, FNGJ50, FNGP, FNG CNC FB3, FB4, FB5, FB6 as well as for S32 lathes. Ksdpfx Aheufgb Ishslt

Kondisi: bekas, Tahun pembuatan: 2024, produsen pengendali: Heidenhain, model controller: ND 7013, Beschreibung: Technical Data Center height: 260 mm Swing diameter over bed: 535 mm Swing diameter over cross slide: 345 mm Distance between centers: 1,500 mm Spindle nose: DIN 55027 / DIN ISO 702-3, Size 6 Spindle bore: 71 mm Spindle bearing diameter (front): 100 mm Drive power: 7.5 kW Speed range: 33 – 1,500 rpm Metric thread pitches: 0.5 – 28 mm Quill diameter: 65 mm Quill stroke: 120 mm Kledpfoyu Ilijx Ahhet Internal taper: DIN 228 MK 4 Standard Equipment - Cover plate for leadscrew and feed shaft - Chip guard rear wall - Chuck guard with safety interlock - Chip deflector - Longitudinal stop with micrometer screw - Change gear cover with safety interlock - Main drive brake unit - Start-up clutch - LED machine light mounted in chip guard rear wall - Multifix quick-change toolholder, size B (Multi Suisse) - Incl. 1 x quick-change toolholder BD 25120 - Coolant system incl. coolant pump, 30 l/min at 0.2 bar - Taper sleeve MK5 for main spindle - Fixed center MK5 - Central lubrication - Tropical insulation for max. 45°C ambient temperature and max. 80% relative humidity - Oil gun - Set of operating keys - Documentation Optional Equipment - Set of leveling pads, 8 pcs - Digital position indicator mounted on bracket above headstock - Packaging

Kondisi: bekas, Detail Teknis: Lubang spindle: 60 mm Panjang pembubutan: 45 mm Diameter pembubutan maks.: 56 mm Kedalaman bor maks.: 70 mm Putaran: 48 - 1500 (spindle) rpm Pemotongan ulir: putaran: 24 - 750 rpm Revolver alat – jumlah stasiun: 8 Kebutuhan daya total: 5,5 kW Berat mesin sekitar: 2,4 t Klsdpfx Aju Iwyijhhst Kebutuhan ruang sekitar: P:2,1x1,0x1,8 m Mesin bubut otomatis dengan kontrol cam berbasis template. Benda kerja dijepit menggunakan collet. Kepala revolver: disc turret Hahn & Tessky Esslingen, perjalanan alat 80 mm, penyesuaian 36 mm, jarak collet/kepala revolver min./maks.: 72/188 mm 2 unit support pembubutan, panjang kerja 45 mm 2 unit support pemotongan, panjang kerja sekitar 40 mm Sistem pendingin Mesin belum terhubung. Penjualan dengan harga lepas.

Tahun pembuatan: 2022, Kondisi: baru, Offer upon request Machine is immediately available Ksdpfjiw Dgisx Ahholt