Zwick Roell HIT5P Plus alat uji tumbukan pendulum

Zwick Roell Pendelschlagwerk HIT5P Plus inkl. TestXpert III

Zwick Roell Pendulum Impact Tester HIT5P Plus incl. TestXpert III Software and 2 Charpy Pendulums
Year of manufacture: 2019
Dossier number: DO733812
Fixed safety guard mounted on the left
• 010924
TestXpert III Software
TestXpert III Basic Program 1035123
Djdpfx Aew H Andoaysku
TestXpert III Standard Test Program 1035790
Manual
Charpy Pendulum 1J BPI-ACPECHI.112
Charpy Pendulum 5J BPI-ACPECHI.115
Testing in accordance with Charpy ISO 179-1:2000 + Amend. 1:2005 German version EN ISO 179-1:2000 + A1_2005

Dimensions: 680 x 658 x 404 mm (without guard)
Maximum capacity: 5 J
Dimensions (W x H x D): 680 x 658 x 404 mm (without guard)
Weight (without inserts): approx. 75 kg
Electrical connection: 100 to 240 V, 50/60 Hz, 70 W
Interfaces: RS232, USB
Angular resolution: 0.018°
Test results, numerical:
Impact energy [%]
Impact energy [J; ft lbf]
Impact toughness [kJ/m²]
Control function: pendulum vertical position
Oscillation duration
Pendulum vertical position
Oscillation duration
Correction function: friction compensation
Tensile impact test:
Air and bearing friction kinetic yoke energy


3.1 Charpy Testing
The Charpy anvils consist of a solid cast base body. Test-specific parts, such as supports and anvils, are selected according to the sample spectrum.
The anvils, which can have a significant influence on the test results due to surface roughness and radius, are produced entirely by precision CNC machining and are 100% measured. ZwickRoell does not offer one-piece anvils, as they are difficult to manufacture with tight tolerances. During installation, the spatial position of the anvil relative to the pendulum striker is ensured using an optional gauge.
As anvils are subject to higher wear than supports, two-piece anvils can be replaced independently of other accessories at low cost. To adjust the impact point to the sample width in the impact direction, quick-change adapter plates are used. Adaptation to the sample thickness (vertical direction) is achieved using appropriately dimensioned supports, which are precisely positioned by locating pins.
Optional accessories for the impact tester include a pivoting safety screen and alignment units, which position the sample either at the notch or at the end face to the center of impact.
Advantages:
• Rapid anvil change
• Precision manufacturing and documented 100% dimensional inspection of the anvils

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.